Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Printer parts diagram for: C2693-67024

 

C2693-67024 is represented by #22 in the diagram below.

C2693-67024 is represented by #22 in the diagram below.
1
C8128-67016 Door Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel
10
C2693-67050 Guide Guide assembly - For the linefeed encoder disk
11
C2693-67082 Encoder Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
12
C2693-67075 Cable Carriage flex cable - 18.5in long
13
C8128-67010 Handle Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer
14
C2693-67019 Tray Paper input tray - Includes width adjuster
15
C8128-67005 Keypad Keypad assembly
16
C8128-67003 Cover Left side end cap - Covers the left side of the printer
17
C2693-67043 Support Left support assembly - Supports the left side of the print mechanism - Includes the index sensor and sensor harness
18
C8173-67025 PC Board Linefeed encoder PC board - Reads the linefeed encoder disk
19
C2693-67071 Cable Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor
2
C2693-67048 Backbone Backbone assembly - Large metal frame where the main logic PCA, power supply, and the carriage drive motor are mounted
20
C8128-67002 PC Board Main logic PC board
21
C2693-67025 Belt Output belt - Drives the output roller
22
C2693-67024 Roller Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic
23
C8173-67023 Motor Output motor - Powers part of the output mechanism
24
C2693-67002 Tray Paper output tray - Has a media width adjuster and a smoked plastic sliding extension for longer paper
25
C2693-67018 Roller Pickup roller assembly - Shaft with 1 roller - Picks paper from paper input tray
26
C8173-67019 Power Supply Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max
27
C2693-67007 Cable Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long
28
C8128-67013 Cover Rail cover - Mounts over the starwheel assembly
29
C8128-67004 Cover Right side end cap - Covers the right side of the printer
3
C2693-67028 Base Base plate assembly - Metal base plate that supports the printer
30
C2693-67049 Support Right support assembly - Supports the right side of the print mechanism and the service station assembly
31
C2693-67053 Maintenance Kit Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
32
C8173-67021 Service Station Complete service station assembly - Includes the service station motor, wiper assembly, and sponge
33
C8173-67024 Sensor Spot sensor assembly - Mounts on the side of the carriage
34
C2693-67027 Starwheel Starwheel assembly - Includes starwheel chassis assembly and starwheels
35
C2693-67034 Guide Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate
36
C2693-67030 Base Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly
37
C2693-67023 Guide Upper paper guide - Guides media through paper path
5
C2693-67016 Belt Carriage drive belt - Moves printhead side to side
6
C8173-67020 Motor Carriage drive motor assembly (includes pulley)
7
C8128-67007 Door Rear cleanout door assembly - Paper jam cleanout door
8
C2693-67020 Roller Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc
9
C2693-67031 Encoder Linefeed encoder disk
bottom bar