C2890-40077 Printer Parts Diagram


C2890-40077 is represented by #52 in the diagram below. 1 C2890-60082 Carriage Carriage assembly - Includes flex cable and bushings 10 C2124-60115 Motor Carriage motor - Drives the carriage belt 11 C2890-60238 Cable Paper motor power cable 13 1480-1023 Shaft Idler shaft (dowel pin) 14 C2890-60078 Actuator Clutch actuator 15 C2171-67806 Idler Idler pulley - Holds left end of carriage belt 16 C2890-60083 PC Board Pen driver PC board 18 C2890-60079 Holder Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position 19 C2170-00002 Retainer Carriage rod retainer - Holds left end of carriage rod 20 C2890-60049 Plate Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers 21 C2128-00003 Spring Helper spring - Used to lift the pressure plate assembly 22 C2890-40070 Arm Lever arm - Used to lift the pressure plate lifter 23 C2890-20006 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter 24 C2890-40071 Lifter Separator lifter - Installed between the separator and the pressure plate lifter 25 C2890-40068 Cap Left/right lifter cap - Holds the pressure plate lifter in place 26 C2890-40075 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place 28 C2890-40072 Peg Separator peg - Lifts the separator pad when the lifter shaft lifts 29 C2890-60052 Chassis Print mechanism chassis assembly - The base structure of the print mechanism 30 C2124-20011 Spring Pre-loader spring 32 C2890-40063 Bracket Belt tension bracket - Holds the carriage belt idler pulley 34 C2890-40076 Adjuster Adjuster - Used to adjust pen-to-paper spacing 35 C2890-40073 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed 38 C2890-60076 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism 39 C4549-00002 Guide Paper guide - Holds the upper pinch rollers and springs 4 C2890-80026 Absorber Ink absorber for HP OfficeJet 330 Series 44 C2890-60023 Cable Pen driver ribbon cable - 27cm (10.5in) long 48 C2890-40067 Limiter Rotation limiter - Limits the rotation of the pivot 49 9170-1618 Toroid Toroid for pen driver cable 50 C2113-40006 Wiper Wiper - Cleans ink and debris from print nozzles 51 C2890-40108 Flag OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers 52 C2890-40077 Sensor Envelope sensor 53 C2890-69177 Print Mechanism Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays 6 C2890-60081 Spitton Spittoon assembly - Includes absorber 7 C2890-60084 Sled Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly 8 C2890-60080 Service Station Service station assembly - Includes service station base (frame) and sled retainer 9 C2128-00051 Damper Carriage belt damper - Installed under right end of carriage belt

1

C2890-60082 Carriage Carriage assembly - Includes flex cable and bushings

10

C2124-60115 Motor Carriage motor - Drives the carriage belt

11

C2890-60238 Cable Paper motor power cable

13

1480-1023 Shaft Idler shaft (dowel pin)

14

C2890-60078 Actuator Clutch actuator

15

C2171-67806 Idler Idler pulley - Holds left end of carriage belt

16

C2890-60083 PC Board Pen driver PC board

18

C2890-60079 Holder Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position

19

C2170-00002 Retainer Carriage rod retainer - Holds left end of carriage rod

20

C2890-60049 Plate Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers

21

C2128-00003 Spring Helper spring - Used to lift the pressure plate assembly

22

C2890-40070 Arm Lever arm - Used to lift the pressure plate lifter

23

C2890-20006 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter

24

C2890-40071 Lifter Separator lifter - Installed between the separator and the pressure plate lifter

25

C2890-40068 Cap Left/right lifter cap - Holds the pressure plate lifter in place

26

C2890-40075 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place

28

C2890-40072 Peg Separator peg - Lifts the separator pad when the lifter shaft lifts

29

C2890-60052 Chassis Print mechanism chassis assembly - The base structure of the print mechanism

30

C2124-20011 Spring Pre-loader spring

32

C2890-40063 Bracket Belt tension bracket - Holds the carriage belt idler pulley

34

C2890-40076 Adjuster Adjuster - Used to adjust pen-to-paper spacing

35

C2890-40073 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed

38

C2890-60076 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism

39

C4549-00002 Guide Paper guide - Holds the upper pinch rollers and springs

4

C2890-80026 Absorber Ink absorber for HP OfficeJet 330 Series

44

C2890-60023 Cable Pen driver ribbon cable - 27cm (10.5in) long

48

C2890-40067 Limiter Rotation limiter - Limits the rotation of the pivot

49

9170-1618 Toroid Toroid for pen driver cable

50

C2113-40006 Wiper Wiper - Cleans ink and debris from print nozzles

51

C2890-40108 Flag OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers

52

C2890-40077 Sensor Envelope sensor

53

C2890-69177 Print Mechanism Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays

6

C2890-60081 Spitton Spittoon assembly - Includes absorber

7

C2890-60084 Sled Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly

8

C2890-60080 Service Station Service station assembly - Includes service station base (frame) and sled retainer

9

C2128-00051 Damper Carriage belt damper - Installed under right end of carriage belt

Printer parts diagram for: C2890-40077

C2890-40077 is represented by #52 in the diagram below.