C8128-67004 Printer Parts Diagram


C8128-67004 is represented by #29 in the diagram below. 1 C8128-67016 Door Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel 10 C2693-67050 Guide Guide assembly - For the linefeed encoder disk 11 C2693-67082 Encoder Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position 12 C2693-67075 Cable Carriage flex cable - 18.5in long 13 C8128-67010 Handle Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer 14 C2693-67019 Tray Paper input tray - Includes width adjuster 15 C8128-67005 Keypad Keypad assembly 16 C8128-67003 Cover Left side end cap - Covers the left side of the printer 17 C2693-67043 Support Left support assembly - Supports the left side of the print mechanism - Includes the index sensor and sensor harness 18 C8173-67025 PC Board Linefeed encoder PC board - Reads the linefeed encoder disk 19 C2693-67071 Cable Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor 2 C2693-67048 Backbone Backbone assembly - Large metal frame where the main logic PCA, power supply, and the carriage drive motor are mounted 20 C8128-67002 PC Board Main logic PC board 21 C2693-67025 Belt Output belt - Drives the output roller 22 C2693-67024 Roller Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic 23 C8173-67023 Motor Output motor - Powers part of the output mechanism 24 C2693-67002 Tray Paper output tray - Has a media width adjuster and a smoked plastic sliding extension for longer paper 25 C2693-67018 Roller Pickup roller assembly - Shaft with 1 roller - Picks paper from paper input tray 26 C8173-67019 Power Supply Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max 27 C2693-67007 Cable Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long 28 C8128-67013 Cover Rail cover - Mounts over the starwheel assembly 29 C8128-67004 Cover Right side end cap - Covers the right side of the printer 3 C2693-67028 Base Base plate assembly - Metal base plate that supports the printer 30 C2693-67049 Support Right support assembly - Supports the right side of the print mechanism and the service station assembly 31 C2693-67053 Maintenance Kit Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips 32 C8173-67021 Service Station Complete service station assembly - Includes the service station motor, wiper assembly, and sponge 33 C8173-67024 Sensor Spot sensor assembly - Mounts on the side of the carriage 34 C2693-67027 Starwheel Starwheel assembly - Includes starwheel chassis assembly and starwheels 35 C2693-67034 Guide Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate 36 C2693-67030 Base Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly 37 C2693-67023 Guide Upper paper guide - Guides media through paper path 5 C2693-67016 Belt Carriage drive belt - Moves printhead side to side 6 C8173-67020 Motor Carriage drive motor assembly (includes pulley) 7 C8128-67007 Door Rear cleanout door assembly - Paper jam cleanout door 8 C2693-67020 Roller Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc 9 C2693-67031 Encoder Linefeed encoder disk

1

C8128-67016 Door Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel

10

C2693-67050 Guide Guide assembly - For the linefeed encoder disk

11

C2693-67082 Encoder Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position

12

C2693-67075 Cable Carriage flex cable - 18.5in long

13

C8128-67010 Handle Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer

14

C2693-67019 Tray Paper input tray - Includes width adjuster

15

C8128-67005 Keypad Keypad assembly

16

C8128-67003 Cover Left side end cap - Covers the left side of the printer

17

C2693-67043 Support Left support assembly - Supports the left side of the print mechanism - Includes the index sensor and sensor harness

18

C8173-67025 PC Board Linefeed encoder PC board - Reads the linefeed encoder disk

19

C2693-67071 Cable Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor

2

C2693-67048 Backbone Backbone assembly - Large metal frame where the main logic PCA, power supply, and the carriage drive motor are mounted

20

C8128-67002 PC Board Main logic PC board

21

C2693-67025 Belt Output belt - Drives the output roller

22

C2693-67024 Roller Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic

23

C8173-67023 Motor Output motor - Powers part of the output mechanism

24

C2693-67002 Tray Paper output tray - Has a media width adjuster and a smoked plastic sliding extension for longer paper

25

C2693-67018 Roller Pickup roller assembly - Shaft with 1 roller - Picks paper from paper input tray

26

C8173-67019 Power Supply Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max

27

C2693-67007 Cable Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long

28

C8128-67013 Cover Rail cover - Mounts over the starwheel assembly

29

C8128-67004 Cover Right side end cap - Covers the right side of the printer

3

C2693-67028 Base Base plate assembly - Metal base plate that supports the printer

30

C2693-67049 Support Right support assembly - Supports the right side of the print mechanism and the service station assembly

31

C2693-67053 Maintenance Kit Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips

32

C8173-67021 Service Station Complete service station assembly - Includes the service station motor, wiper assembly, and sponge

33

C8173-67024 Sensor Spot sensor assembly - Mounts on the side of the carriage

34

C2693-67027 Starwheel Starwheel assembly - Includes starwheel chassis assembly and starwheels

35

C2693-67034 Guide Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate

36

C2693-67030 Base Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly

37

C2693-67023 Guide Upper paper guide - Guides media through paper path

5

C2693-67016 Belt Carriage drive belt - Moves printhead side to side

6

C8173-67020 Motor Carriage drive motor assembly (includes pulley)

7

C8128-67007 Door Rear cleanout door assembly - Paper jam cleanout door

8

C2693-67020 Roller Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc

9

C2693-67031 Encoder Linefeed encoder disk

Printer parts diagram for: C8128-67004

C8128-67004 is represented by #29 in the diagram below.