Information for: 0515-4679

• PartDescription
• 030040FNITNIScrew - used to secure flatbed scanner slide rail
• 030080FWWSNIM3 pan-head phillips screw with machine threads and captive washer - 8mm long
• 040100FNBBNIM4 pan-head phillips screw with machine threads - 10mm long
• 0515-2908Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
• 0515-2923Self taping screw - M4 X 10MM long
• 0515-4257Pan head taptite screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
• 0515-4318Stabilizing screw for the 2,000-sheet feeder - Mounts on right side of the 2,000-sheet paper feeder assembly (two used)
• 0515-4680Self taping screw - M4 X 10MM long
• 0515-5865Screw K30 X 1.34 X 9 Mm
• 3030-1103Screw socket head cap (black) 6,32mm 0.25 inch long
• 5851-6609Kit-Screw Driver Dual Bit
• FU5-9059-000CNM3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
• IR4041P021NIM3 pan-head phillips screw with plastite threads - 8mm long
• J8A10-67904Kit-Stapler Stacker Screw
• RC1-0266-020CNM3 stepped shaft screw
• RS5-9099-000CNStepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
• WS9-0255-000CNHex head bolt - Thumbscrew on left rear corner - Two used
• XA9-0499-000CNScrew with captured washer - Used to fasten plastic to metal - M4 X 6mm screw
• XA9-0912-000CNMachine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
• XA9-0994-000CNScrew - M4 x 6mm long
• XA9-1159-000CNM3 X 10mm machine screw with attached washer - Used to hold plastic to metal
• XA9-1386-000CNM3 X 8mm long self threading screw with captured washer
• XA9-1418-000CNM3x6 TP screw for HP LaserJet 500 MFP
• XA9-1420-000CNM3 pan head phillips screw with captive flat and split-lock washers - 8mm long
• XA9-1422-000CNM4 X 12mm machine screw with washer
• XA9-1447-000CNM12 pan-head Phillips screw with annular nails - 8mm long
• XA9-1448-000CNScrew - M4 X 8mm long
• XA9-1449-000CNM3 pan-head Phillips screw with machine threads - 8mm long
• XA9-1464-000CNScrew - Flat head phillips drive machine screw - M3 X 6mm
• XA9-1466-000CNMachine screw with captured washer - M3 X 29.5mm long
• XA9-1469-000CNMachine screw with attached washer - M3, 10mm - Used to hold plastic to metal
• XA9-1495-000CN4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
• XA9-1500-000CNM3 pan-head Phillips screw with flat washer - 8mm long
• XA9-1503-000CNM3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
• XA9-1504-000CNM3 truss head (flanged) screw - 8mm long
• XA9-1671-000CNScrew - M3 X 8mm long
• XA9-1801-000CNM13x12 RS screw - Used to secure metal to metal
• XB1-1300-605CNM3x6mm machine pan head screw
• XB1-2300-407CNM3x4 machined truss-head screw
• XB2-6300-607CNScrew - M3 X 6mm long
• XB2-7300-607CNM3X6mm screw with captured washer
• XB2-7400-606CNScrew toothed washer - M4 x 6mm - Used to secure metal components to metal components
• XB2-8300-607CNM3x6 screw with washer
• XB4-5401-009CNMachine screw with attached washer - M3, 10mm - Used to hold plastic to metal
• XB4-5401-209CNScrew - M4 X 8mm long
• XB4-7300-605CNScrew - 6 mm Phillips head screw with attached washer
• XB4-7300-809CNM3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long
• XB4-7401-005CNM4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
• XB4-7401-006CNM4x10 tapping pan-head screw
• XB4-7401-007CNM4 pan-head phillips screw with self-tapping threads - 10mm long
• XB6-7303-005CNMachine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic