Information for: 24540-80010

• PartDescription
• 02276-80053Cable assembly which connects the main logic board to the print mechanism
• 02276-80054Cable assembly which connects the power supply to the main logic board
• 02276-80055Flex circuit cable which connects the head driver board to the carriage assembly
• 02276-80118Cable assembly which connects the main logic board to the carriage motor
• 13242GRS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long
• 17255DRS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
• 17302ARS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
• 24542GRS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
• 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
• A6144-63008RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• C1633-60014Cable assembly with ferrite - 18-pin (F) connector to four cables - Other connectors are two 4-pin (F), one 4-pin (M), and one 6-pin (F) - Overall length is 93cm (37.8in)
• C1633-60050Carriage assembly trailing cable - 28-pin (F) connector to 28-pin (F) connector attached to mounting hardware - 1.6m (5.3ft) long
• C1676-60092Carriage assembly trailing cable
• C2121-60130Cable assembly for HP DeskJet 550C Series
• C2124-60193Cable assembly for HP DeskJet 550C Series
• C2124-80014Flex cable for HP DeskJet 550C Series
• C2124-80015Power cable assembly
• C2162-40058Cable-Mgr-Kypd
• C2801-60003Output stacker interface cable
• C2801-80014Output stacker elevator module ribbon cable
• C2801-80026Telephone cable assembly - 4-pin (F) RJ-11 connector to 2-pin (F) connector - 22.1cm (8.7in) long
• C2847-60005Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long
• C2847-60019Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long
• C2847-60034Ribbon cable - Has 12-pin (F) connectors - 1.2m (3.9ft) long
• C2858-60011Cable harness assembly
• C2858-60024Carriage assembly trailing cable
• C2913ARS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
• C2932ARS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• C2933ARS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long
• C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• C2990AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
• C2991AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
• C3180-60007Trailing cable for HP DesignJet 220 D size
• C3180-60012Ribbon cable - Has 5-pin (F) connectors - 16.3cm (6.4in) long
• C3540-60008Carriage assembly trailing cable
• C3540-60250Carriage assembly trailing cable - Has two ribbon cables bundled together - 85.7cm (33.8in) long
• C4713-60181Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
• C4713-60182Flexible stranded wire cable - 12.5cm (4.9in) long
• C4714-60181Carriage assembly trailing cable (E-size) - Has 60-pin (F) connectors - 1.9m (6.2ft) long
• RF1-2427-000CNAC connector cable assembly - For fusing assembly
• RG1-0905-000CNCable assembly - From AC power module to DC power supply
• RG1-0906-000CNCable assy - From DC controller to high voltage power supply
• RG1-0907-000CNCable assembly - Large 7-pin (F) connector to small 7-pin (F) connector - 41.5cm (16.4in) long
• RG1-0908-000CNDual cable assembly with ferrites - One 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 43.2cm (17in) long
• RG1-0912-000CNCable assembly - Large 4-pin (F) connector to small 4-pin (F) connector - 6.7cm (2.6in) long
• RG1-1318-000CNUpper main AC power cable harness which connects to most major assemblies - 120v, 60Hz
• RG1-1319-000CNLower main cable harness
• RG1-1370-000CNCable assembly for HP LaserJet II
• RG1-1602-000CNCable assembly - From AC power supply to fusing assembly
• RG1-1608-000CNCable assembly - Includes pickup solenoid
• RG1-1609-000CNCable assembly - Has eight connectors
• RG1-1612-000CNSensor cable assembly
• RG1-1632-000CNUpper main cable harness which connects to most major assemblies - 240V, 50Hz
• RG1-1946-000CNCable assembly for HP LaserJet III
• RG1-2067-000CNDual cable assembly with ferrites - 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 48.9cm (19.3in) long
• RG1-2307-000CNCable assembly - From formatter board to control panel
• RG1-3529-000CNSensor cable - From controller PCA to photo sensor PS1
• RG5-0103-000CNCable assembly for HP LaserJet 4Si Series
• RG5-0104-000CNCable assembly for HP LaserJet 4Si Series
• RG5-0107-000CNCable assembly for HP LaserJet IIISi
• RG5-0108-000CNCable assembly - From DC controller to paper input board
• RG5-0109-000CNCable assembly - From DC controller to duplex board
• RG5-0130-000CNCable assembly - From DC controller to formatter board
• RG5-0156-030CNCable assembly for HP LaserJet 4Si Series
• RG5-0239-000CNCable - From DC controller board to cassette size sensor board and front cover connect board
• RG5-0519-000CNCable assembly for HP LaserJet 4 Series
• RG5-0520-000CNCable assembly - From DC controller to scanner assembly
• RG5-0521-000CNCable assembly for HP LaserJet 4 Series
• RG5-0522-000CNCable assembly - From DC controller to delivery sensor (PS3)
• RG5-0524-000CNCable assembly - From DC controller to paper control board
• RG5-0526-000CNCable assembly - From DC controller to AC power supply
• RG5-0529-000CNCable assembly for HP LaserJet 4
• RG5-0530-000CNCable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly
• RG5-0538-000CNCable assembly - From DC controller to main motor
• RG5-0556-000CNCable assembly - From DC controller to laser assembly
• RG5-0766-030CNScanner connector assembly - Scanner to DC controller board
• RG5-0815-000CNCable assembly for HP LaserJet 4P Series
• RG5-0975-000CNCable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector
• RG5-0976-000CNCable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long
• RG5-0978-000CNCable assembly - From DC controller to main motor
• RG5-0979-000CNCable assembly for HP LaserJet 5se Series
• RG5-0980-000CNCable assembly - From DC controller to delivery sensor (PS3)
• RG5-0982-000CNCable assembly for HP LaserJet 4M Plus Series
• RG5-1442-000CNCable assembly - 4-pin (F) connector to 3-pin (F) connector - 31.1cm (12.3in) long
• RG5-1446-000CNCable assembly - Large 8-pin (F) connector to small 8-pin (F) connector - 69.1cm (27.2in) long
• RG5-1447-000CNCable - From DC controller board to registration and cassette paper pickup clutches
• RG5-1485-000CNCable - From control panel to interface board
• RH2-5104-000CNFiber optic cable - From DC controller to fiber optic lens
• RH2-5108-000CNLaser/scanner fiber optic cable - 42.5cm (16.8in) long
• RH2-5109-000CNFiber optic cable
• SG4-6271-000CNCable assembly for HP LaserJet II
• SG5-4022-000CNCable assembly for HP LaserJet III