Information for: C2162-67806

• PartDescription
• C2113-00003Sled spring - Maintains left sled alignment in sled ramps
• C2124-00001Encoder spring - Provides tension for encoder strip
• C2124-00009Spring - Installed in spittoon assembly
• C2124-20004Belt spring - For belt tension bracket
• C2124-20008Limiter spring - Provides tension for rotation limiter
• C2128-00002Kicker spring - Provides tension for the kicker
• C2128-00006Separator spring - Provides pressure between the separator assembly and the center drive roller
• C2145-00017Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
• C2145-00033ESD spring - Installed between ESD blade and carriage PC board
• C2162-20004Pivot spring - Provides tension for pivot to return to upright position
• C2164-00016Sled bias spring - Holds sled in position in service station
• C3801-00003Encoder strip spring
• C3801-00025Pre-feed spring (rectangular)
• C3801-80024Gimbal spring - Coil spring installed in the scanner cover assembly located under the gimbal
• C3801-80031ASF plunger spring under the ADF separator
• C3801-80067Spring - Located on right side of starwheel assembly
• C3801-80071Torsion spring - For paper detect flag
• C4557-00009Separator spring - Provides pressure between separator assembly and the center drive roller
• C4557-00011Drawer spring - Holds input drawer in place
• C4557-00017Belt tension spring - Provides tension for carriage belt
• C4557-00018Encoder spring - Provides tension for encoder strip
• C4557-00026Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges
• C4557-00029Left wall spring (front) - Holds left wall assembly in position
• C4557-00030Left wall spring (rear) - Provides pressure against media
• C4557-00031Paper length adjuster spring - Provides tension for paper input length adjuster
• C4557-00033Link spring - Provides tension to shaft of pick cam gear
• C4557-00035Paper pusher spring - Maintains alignment in paper tray
• C4557-20003Rear roller spring - Flexible axle for rear roller
• C4557-20007Pinch spring - Provides tension on upper paper guide
• C4557-20009Latch spring - Provides friction for the knob on the rear cleanout door assembly
• C4557-20020Envelope spring - Holds envelopes in position for picking
• C4557-20024Shifter spring - Provides tension on the pivot
• C4557-20028EOR tension spring - Maintains tension on wear strip
• C5374-80023Feed roller spring - Installed on lower ADF feed roller
• C5374-80033White reference spring - Applies pressure against the white reference
• C5870-20002Paper stacker (kicker) spring
• C6409-00011Encoder spring - Provides tension for encoder strip
• C6409-00017Wing torsion spring - Provides pressure on the wing during paper output
• C6426-00011Photo lever spring
• C6426-00012Photo bias spring
• C6426-00017Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate
• C6426-20002Send RFQ below for updated Price and Description
• C6426-20005Spring for rear rollers
• C6426-20008Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot
• C6426-20011Rod spring - Installed on right side of backbone
• C6426-20012Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position
• C6429-00004Photo latch spring
• C6455-00011Spring, Length Adjust
• C6455-40053Spring-lifter sleeve
• C6455-60044Assy-idler spring
• C6487-00031HP Spring for DeskJets
• C6487-00032Spring-pinch for HP DeskJet 6940 Series
• C6487-20005Spring-rod for HP DeskJet 6620 Series
• C8424-80005Idler spring for HP Digital Copier 310
• C8952-00010Spring, X-Bias