Information for: C2932A

• PartDescription
• 24540-80010Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
• 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
• C2933ARS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long
• C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• C2990AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
• C2991AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
• RG1-3529-000CNSensor cable - From controller PCA to photo sensor PS1
• RG5-0524-000CNCable assembly - From DC controller to paper control board
• RG5-0526-000CNCable assembly - From DC controller to AC power supply
• RG5-0529-000CNCable assembly for HP LaserJet 4
• RG5-0530-000CNCable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly
• RG5-0766-030CNScanner connector assembly - Scanner to DC controller board
• RG5-0815-000CNCable assembly for HP LaserJet 4P Series
• RG5-0975-000CNCable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector
• RG5-0976-000CNCable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long
• RG5-0978-000CNCable assembly - From DC controller to main motor
• RG5-0979-000CNCable assembly for HP LaserJet 5se Series
• RG5-0980-000CNCable assembly - From DC controller to delivery sensor (PS3)
• RG5-0982-000CNCable assembly for HP LaserJet 4M Plus Series
• RG5-3523-000CNCable assembly for HP LaserJet 5000 Series
• RG5-3554-000CNFace down bin full cable
• RG5-3557-000CNCable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector
• RG5-3558-000CNTop of page sensor cable
• RG5-3561-000CNHP Cable for LaserJets, fuser cable.
• RG5-3562-000CNCable assembly - A 22-pin (F) connector to many cables: 32.4cm (12.8in) with 8-pin (F) connector, 34.9cm (13.8in) with 7-pin (F) connector, 40.3cm (15.9in) with 4-pin (F) connector, and 66.4cm (26.1in) with 3-pin (F) connector
• RG5-3700-000CNCable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long
• RG5-3703-000CNCable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector
• RG5-3704-000CNEnvelope feeder connector and cable
• RG5-3705-000CNCable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector
• RG5-3706-000CNFeed/registration sensor assembly cable
• RG5-3708-000CNCable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector
• RG5-3709-000CNMain motor cable
• RG5-3710-000CNPaper feeder module cable
• RG5-3711-000CNOptical sensor cable
• RG5-3822-000CNPaper feeder cable
• RG5-3876-000CNCable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long
• RG5-4213-000CNCable assembly with ferrite - A large 14-pin (F) connector to a small 11-pin (F) connector - 10.0cm 3.9in long (please purchase C4115A).
• RG5-7073-000CNCable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector
• RH2-5337-000CNRibbon cable - Has two 40-pin (M) edge connectors - 1.4cm (0.6in) long
• RH2-5338-000CNRibbon cable - From paper PCA to controller PCA