Information for: CH971-50014

• PartDescription
• CH154-67009UV lamp power cable - Cable goes from the electronics assembly to one lamp - For use with Scitex FB500/FB700/FB950
• CH971-50028Cable - Goes from the three pin sabre connector on the AC distribution board to an AC receptacle
• CH971-50116Cable - Goes from the AC filter to the power distribution board
• CH971-50148Cable assembly - Cable between the headboard and the UV lamp - For the Scitex FB950 and the Designjet H-Series
• CH971-50163Cable harness - Goes from the OHS board to the ink pumps
• CH971-50284Cable - Goes from the UV power supply to the external connector for the UV lamp cable found on the top side of the electronics box
• CH971-50286Cable assembly - 2-wire cable - Ties in to the power cable for the UV lamp cable receptacle on the exterior of the electronics box
• CH971-50289Cable assembly - 2-wire cable - Ties in to the power cable for the UV lamp cable receptacle on the exterior of the electronics box
• CH971-50299Cable assembly - Goes from the power distribution board to the external receptacle for take-up motor power
• CH971-50300Internal ebox cable - Goes from the AC distribution board to the UVPS and AC relay - Has a 4-pin molex sabre connector for the AC distribution board connection
• CH971-50316Camera fans cable - Goes from the upper HDBD connector to the rear carriage fans
• CH971-50322Cable assembly - Goes from the headboard to the carriage home sensor
• CH971-50354Internal ebox cable assembly - Cable that goes from the I/O board J28 to AC relays, cooling fans, main power switch, foot pedal, and UV cable-present sensor
• CH971-50364Cable assembly - 2-wire cable - Goes from the UV power supply to the cable harness from the I/O board
• CH971-50404Cable assembly - Goes from the lower HDBD connector to the front carriage fans and color sensor fan
• CH971-52323Cable - Used to connect the printer directly to a print server - For use without a hub
• CH971-55682Cable assembly - Goes from the I/O board to the motor control board
• CH971-57303Cable - Goes from the headboard to the air valve assembly
• CH971-57465Cable - Goes from the external power receptacle for the ionizer power supply to the I/O board and power distribution board
• CQ114-67006Carriage valve cable - Cable from headboard to the valve/manifold assembly - For the Scitex FB500/FB700 printer
• CQ114-67031UV power output cable - Cable from the UVPS to the external connector on the electronics assembly for the track UV power cable - The external connector is integrated with this cable
• CQ114-67033Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the 24 VDC vacuum power supply and to the service station ShopVac - For the Scitex FB500/FB700 printer
• CQ114-67035Cable assembly - Cable that goes from the AC distribution board to the ATX power supply - For the Scitex FB500/FB700 printer
• CQ114-67036Ribbon cable - Ribbon cable from the I/O board to the motor driver board - For the Scitex FB500/FB700 printer
• CQ114-67039Cable assembly - Cable goes from the OHS board to the external 4-pin connector in the ink rack area for the white ink homogenizer
• CQ114-67051Serial data cable - Touch-sensitive data transmission cable - Located between the LCD control panel and the I/O board
• CQ114-67052VGA cable - Located between the LCD control panel and the motherboard - For the video display
• CQ114-67061Tray fan cable - Cable assembly used in the belt vacuum table - For the Scitex FB500 printer
• CQ114-67087Service station lifting encoder cable - For the Scitex FB500/FB700 printer
• CQ114-67098Main AC input cable assembly - Includes the filtered AC inlet and cable/connector to the AC distribution board - For the Scitex FB500/FB700 printer
• CQ114-67099Cable assembly - Cable runs from the back of the I/O board (J28) to many internal components, including the ebox fans, on/off switch, UVPS cable connect sense, and foot switch - For the Scitex FB500 printer
• CQ114-67101Cable harness - Includes all six pump cables - Located from the OHS board to the ink pumps - For the Scitex FB500/FB700 printer
• CQ114-67105Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the relays on the I/O board (this is power cable to the Ionizer) - For the Scitex FB500/FB700 printer
• CQ114-67128LVDS data cable - For use with the Scitex FB950 printer
• CQ114-67147AC power distribution cable - Cable goes from the AC distribution board to the output for the roll-to-roll accessory (the external outlet for the RTR connection is integrated to the cable) - For the Scitex FB500/FB700 printer
• CQ114-67164Exhaust fan cable - This cable runs inside the main output-side door and provides power to the three enclosure fans in the cover - It connects to a cable that comes from J7 of the I/O board - For the Scitex FB500/FB700 printer
• CQ114-67170High resolution read-head interface connector - The read-head cable inserts into this connector - For the Scitex FB500/FB700 printers
• CQ114-67179Interface cable - Cable that goes from the electronics assembly to the encoder interface connector - For the Scitex FB500/FB700 printers
• CQ114-67194Web cam and extension cable - For the Scitex FB500/FB700 printers
• CQ114-67195Interface cable - This is a 71cm (28-inch) long braided cable that connects from the rail to the media vacuum table main frame - Includes fastners - For the Scitex FB500/FB700 printers
• CQ114-67196Grounding cable - This is a 320cm (126-inch) long braided cable that connects from the service side endcap to the chassis - For the Scitex FB500/FB700 printers
• CQ114-67202Camera assembly - Includes cables and metal housing - For the Scitex FB500/FB700 printers
• CQ114-67203Camera flex cable assembly - Replacement pair of the 46cm (18-inch) flex cables connecting the camera assembly to the headboard
• CQ114-67228Frm Adj_Focus Cam-Case-Cbls U
• CQ114-67243Frm-Fb500/700-Igus-Data-Cable
• CQ115-67010Fan tray cable assembly - Located in the belt vacuum table (one is used per tray) - For the Scitex FB700 printers
• CQ115-67040Power cable - Cable goes from the AC distribution board to the UVPS and the AC relay - For the Scitex FB700 printers
• CQ115-67041Internal cable - This cable goes between the AC Relay and the two UV Power Supplies in the FB700 electronics assembly
• CQ115-67042Cable and external connector - For the track UV power cables - Connects to the UVPS and to cable harness from the I/O board - For the Scitex FB700 printers
• CQ115-67043Internal cable - Cable from the back of the I/O board to many internal components, including the ebox fans, on/off switch, UVPS cable connect sense, and foot switch