C7309-40153Cleanout assembly strip - Green plastic bar with two grab tabs - Can be removed to help clear paper jams in the automatic document feeder assembly
Q3948-40007ADF cover assembly (ONLY) - Covers the paper pickup and feed mechanism
Q3948-67914Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
RB2-9916-020CNCover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
RB3-0052-000CNGear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
RB3-0104-000CNRoller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
RB3-0120-000CNSolenoid cover (Steel) - For magnetic wave sheilding
RB3-0120-020CNSolenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
RB3-0165-000CNTop inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
RB3-0166-000CNBottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
RB3-0282-000CNInner cover - Covers the small interconnecting PC board
RB3-0283-000CNInner cover - Covers the bottom of the connector that interconnects the input tray base to the printer
RB3-1032-000CNFusing assembly upper cover - Ribbed cover with end caps
RB3-1087-000CNTop cover for HP Color LaserJet 2820 Series
RB3-1123-000CNTop cover (ONLY) - Has molded-in tray for face down paper output - Does NOT include lift-up door or any other attaching parts
RB3-1125-000CNUpper front cover - Rectangular plastic piece with recess for the printer logo
RB3-1126-000CNUpper left cover - Small cover that is part of the inner side wall in the cartridge access area and provides support for the exterior left side cover
RB3-1128-000CNLeft side cover (ONLY) - Does NOT include the vent cover or power switch button
RB3-1129-000CNRight side cover (ONLY) - Does NOT include the memory access door or grounding plate
RB3-1130-000CNUpper rear cover assembly - Also guides the paper from the fusing assembly to the top output (face down) tray
RB3-1131-000CNLeft rear cover - 'U' shaped cover that mounts on the under-side of the extension for the left scanner hinge
RB3-1132-000CNRight rear cover - 'U' shaped cover that mounts on the under-side of the extension for the right scanner hinge - Covers the scanner interconnection cables
RB3-1134-000CNInternal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
RB3-1135-000CNLower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
RB3-1136-000CNFace-down paper output cover ('L' shaped plastic) - Serves as the rear of the tray for the face-down output on top of the printer
RB3-1137-000CNI/O cover - Rectangular plastic cover with a recessed cutout for the interface connectors
RB3-1139-000CNVent cover - Rectangular plastic cover with molded-in ventilation louvers
RB3-1140-000CNRear cover / face-up output tray (ONLY) - When opened, routes printed pages to this cover/tray for face-up output
RB3-1140-010CNRear cover / face-up output tray - When opened, routes printed pages to this cover/tray for face-up output
RB3-1168-000CNLeft side support frame/cover assembly - For the base on the 250-sheet input tray assembly
RB3-1170-000CNFront cover - Mounts on the front of the cassette assembly for the 250-sheet input tray assembly
RF5-4053-000CNUpper right cover - Small cover that has a cutout for the scanner release button
RF5-4054-000CNUpper right cover assembly - Includes the cover and clear plastic door - Small cover that has a cutouts for the scanner release button and camera (photo) memory interface card slots (Does NOT include the PC boards)
RG5-7597-000CNTop cover assembly - Includes the rear cover with molded-in face-down output tray and the lift-up toner cartridge / imaging drum and transfer assembly cartridge access door - Does NOT include the upper front cover
RG5-7598-000CNLeft side cover assembly - Includes the main cover, vent cover, power switch button, rod and spring (The power switch is located on the low voltage power supply board)
RG5-7599-000CNRight side cover assembly - Includes the right side cover, DIMM memory access door, and the formatter grounding plate
RG5-7604-000CNRear cover / face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output
RG5-7604-010CNRear cover/face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output
RG5-7634-000CNRight side support frame/cover assembly - Includes the frame/cover, printer interface connector, cable, feed drive PC board, and snap-on lid - For the base on the 250-sheet input tray assembly
