Information for: RG5-6240-020CN

• PartDescription
• 4H1-1080-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 4H1-6581-000CNLow voltage power supply cable - Connects between the power supply and the DC controller PC board
• 4H1-6582-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 5851-1828Hard drive cable assembly - 360mm long
• 8120-8911Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark)
• 8120-8912Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end
• 8120-8914Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy)
• 8120-8915Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands)
• 8120-8916Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end
• 8120-8917Telephone cable (South Africa) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, South Africa phone plug on other end
• 8120-8920Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey)
• 8120-8921Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong)
• 8120-8922Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary)
• 8120-8923Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa)
• 8121-0811Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
• 8121-0844Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland)
• 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
• 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
• C2946A8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
• C2947AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
• C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• C8085-60515Flipper and paper path ribbon cable
• C8085-60517Jet-link cable and power cord assembly
• C8549-60105Copy connect cable - Interconnects the copy processor board in one of the optional EIO slots to the LVDS adapter board in the flatbed scanner assembly - 76.20cm (30in) long
• Q3500-80001Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)
• RG5-1928-000CNRegistration cable assembly - Includes 7P and 3P connectors
• RG5-5679-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5722-000CNMain cable harness and holder assembly
• RG5-5722-030CNMain cable harness and holder assembly
• RG5-5723-000CNUpper cable guide assembly
• RG5-5725-000CNOrder Rg5-5725-030cn
• RG5-5725-030CNFan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board
• RG5-5735-000CNPower supply cable - Connects between the scanner power supply board and the print engine power supply module
• RG5-5736-000CNGrounding cable - Grounding cable for ADF/scanner assembly
• RG5-5752-000CNControl panel cable assembly - Connects between the control panel and the intermediate PC board
• RG5-5759-000CNFan connecting cable - For both Fan 1 and 2
• RG5-5763-000CNCable assembly for HP LaserJet 9040 9050 Series
• RG5-5764-000CNCable assembly - Grounding cable for tray 1
• RG5-5770-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5771-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5772-000CNFuser Assembly high voltage cable and connectors
• RG5-5919-000CNRear lower cable - Main lower cable from the DC controller board
• RG5-5920-000CNRear upper cable - Cable from DC Controller to many driver PC Boards
• RG5-5925-000CNFuser connecting cable assembly - Cable with large black main connector for Fuser Assembly
• RG5-5925-020CNFuser connecting cable assembly - Cable with large black main connector for fusing assembly
• RG5-5930-000CNPrint Cartridge Drive cable - From Toner Driver PCA to Toner Cartridge motors and motor rotation sensors
• RG5-5930-020CNPrint cartridge drive cable - From Toner Driver PCA to toner cartridge motors and motor rotation sensors
• RG5-5932-000CNFusing sensor cable assembly - Connects to Fuser sensor PC Board
• RG5-5932-020CNFusing sensor cable assembly - Connects to Fuser sensor PC Board
• RG5-5937-000CNHigh voltage cable - Connects between the main power supply (J1) and the high voltage power supply (J201)
• RG5-5938-000CNProcess cartridge cable - Connects between the print driver board (J608) and the high voltage board (J202)
• RG5-5939-000CNToner cartridge cable - Cable between Print Driver PCA and Toner Driver PCA
• RG5-5940-000CNHigh voltage cable - Connects between the DC controller board (J101) and the high voltage power supply assembly (J203)
• RG5-5943-000CNCrossmember cable - This cable connects J1701R, J3015D, J3013, and J3085 at rear of printer
• RG5-5952-000CNFusing motor cable - Cable between DC Controller PC Board and Fuser motor M10
• RG5-5960-000CNITB sensor cable assembly - On left side of ITB assembly drawer
• RG5-5960-020CNITB sensor cable assembly - On left side of ITB assembly drawer
• RG5-5962-000CNRight rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board
• RG5-5962-020CNRight rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board
• RG5-5963-000CNRight rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board
• RG5-5963-020CNRight rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board
• RG5-5966-000CNPost controller cable - Connects between the high voltage power supply (J210) and the post charging unit (J501)
• RG5-5974-000CNRight upper crossmember cable assembly - Mounts on the upper rear of the print mechanism frame assembly
• RG5-5975-000CNRear lower cable - From DC Controller board to Secondary Transfer/Registration clutches and sensors - J121 to J3022, J3025, J3026 and J3027
• RG5-5991-000CNPower supply cable - Connects between the scanner power supply board and the print engine power supply module
• RG5-5992-000CNGrounding cable - Grounding cable for ADF/scanner assembly
• RG5-6148-000CNLaser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA
• RG5-6148-020CNLaser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA
• RG5-6159-000CNRear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover
• RG5-6159-030CNRear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover
• RG5-6200-030CNVideo board cable - Cable between main power supply and video controller PC Board
• RG5-6200-03ACNVideo board cable - Cable between main power supply and video controller PC Board
• RG5-6200-050CNDC Controller Kit - Includes the cable that connects the low voltage power supply to the formatter and the flat cable that connects DC controller PCB to the formatter
• RG5-6240-000CNJetlink connector socket and cable
• RG5-6249-000CNJetlink connector grounding cable
• RG5-6257-000CNScanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly
• RG5-7783-000CNFan connecting cable - Mounts on the rear of the printer
• RG5-7786-000CNFan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board
• RG5-7787-000CNUpper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer
• RG5-8021-000CNCable assembly for HP LaserJet 9040 9050 Series
• RG5-8025-000CNCable assembly - Fuser power cable
• RG5-8034-000CNFusing assembly high voltage cable and connectors
• RG5-8038-000CNMulti-purpose/tray 1 cable assembly
• RH2-5445-000CNHigh voltage power supply ribbon cable
• RH2-5456-000CNRibbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
• RH2-5507-000CNFlat cable - Ribbon cable between DC Controller PCA and Print Driver PCA
• RH2-5508-000CNRibbon cable - Conntects between the toner controller board (J802) and the memory controller board (J1001)
• RH2-5569-000CNInterface cable assembly - Includes the coiled cable and connector - Mounts on the lower left rear of the high capacity input tray
• RH2-5569-020CNInterface cable assembly - Includes the coiled cable and connector - Mounts on the lower left rear of the high capacity input tray
• RH2-9008-000CNPower cable assembly - Includes the coiled cable with 90 degree power supply connector at one end and straight (M) connector at the other - Mounts on the lower left rear of the high capacity input tray