Information for: RM1-2352-000CN

• PartDescription
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 8121-0712Universal Serial Bus (USB) interface cable - Type A connector to type B connector - 0.6m (24-inches) long
• 8121-1036Universal Serial Bus (USB) interface cable (Black) - Type A connector to type B connector - 0.6m (24-inches) long - USB 2.0 compliant
• C2946A8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
• C2947AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• PF2282K165NILaserJet ADF to scan control board cable
• RK2-0802-000CNFlat cable - Ribbon cable that runs between Formatter PCB and paper scanner on top of printer
• RK2-0816-000CNFlat cable connector - Ribbon cable connector for ribbon cable that runs between Formatter PCB and paper scanner on top of printer - 23 pin connector
• RK2-1171-000CNFlat cable - Connects formatter board to DC controller board
• RM1-1627-000CNMain cable assembly
• RM1-1631-000CNFuser motor cable assembly
• RM1-1634-000CNFuser drive cable assembly - From Low Volatage Power Supply to fusing assembly
• RM1-1638-000CNSensor cable - From DC Controller board to sensors SR1, SR2 and SR3
• RM1-1642-000CNFormatter board power cable assembly
• RM1-1644-000CNSensor cable - Between DC Controller board and disengaging drive sensor
• RM1-1653-000CNMemory contact cable - Connects to e-label sensors
• RM1-2349-000CNDrive sensor cable - Cable that connects to drive motors on right of printer
• RM1-2350-000CNPaper sensor cable assembly
• RM1-2351-000CNMFP power cable assembly
• RM1-2353-000CNPower cable assembly - Cable that runs between the Low Voltage Power Supply and DC Controller board
• RM1-2354-000CNControl panel cable assembly
• RM1-2355-000CNFeed unit connect cable assembly - Cable from the DC controller to the paper feed assembly
• RM1-2356-000CNCable assembly - Goes to MP/Tray 1 Pickup unit, MP/Tray 1 Pickup unit tray sensor switch and pickup drive assembly components
• RM1-2357-000CNFan connecting cable - Connects fans FM2, FM4, and FM7 to the DC Controller
• RM1-2358-000CNFan cable - Connects Fan Driver PCA to Electrostatic Transfer Belt (ETB) cooling fan - Fan FM8
• RM1-2360-000CNFan cable assembly - Connects Fan Driver board to fans FM5, FM6 and FM7 - Also connects Fan Driver board to Sub Power Supply board and DC Controller board
• RM1-2361-000CNPickup cable assembly
• RM1-2366-000CN2 X 500 sheet paper feeder cassette size cable
• RM1-2368-000CN2 X 500 sheet paper feeder solenoid cable - 2 x 500 paper deck driver PCB to lower tray/Tray 4 paper deck pickup solenoid
• RM1-2369-000CN2 X 500 sheet paper feeder motor cable
• RM1-2370-000CNUpper paper pickup assembly door switch cable
• RM1-2371-000CN2 X 500 sheet paper feeder solenoid cable - 2x500 paper deck driver PCB to paper deck pickup motor and upper tray/Tray 3 paper deck pickup solenoid
• RM1-2372-000CNUpper paper pickup assembly paper feed jam sensor cable
• RM1-2373-000CN2 X 500 sheet paper feeder interface cable
• RM1-2381-000CNIntermediate paper transfer unit (IPTU) stepper motor cable assembly
• RM1-2384-000CNIntermediate paper transfer unit (IPTU) drawer connector cable assembly