C2113-80010Absorber - Ink absorber for HP DeskJet 500 Series
C2618A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C2618A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2618A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
02276-40016Arm - 'Paper out' (OOPS flag) sensor arm
C2618A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2106-40012Belt - Carriage belt for HP DeskJet 500 Series
C2618A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C2618A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C2618A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2113-40005Bracket - Wiper bracket - Supports and positions the black wiper
C2618A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
C2618A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
C2618A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
02276-80053Cable - Cable assembly which connects the main logic board to the print mechanism
C2608-60114Cable - Cable assembly for HP DeskJet 525Q
C2618A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C2618A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C2618A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C2618A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C2618A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C2618A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2124-40109Cap - Color cap - Seals print cartridge nozzel when parked
C2618A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2113-60032Carriage - Carriage assembly - Holds and positions print cartridges
C2618A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2618A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2618A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2618A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2618A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C2618A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2618A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2618A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2618A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C2106-40003Chassis - Print mechanism chassis assembly - The base structure of the print mechanism
C2618A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2113-40010Clamp - Motor clamp - Holds ramp motor in place
C2618-60100Cover - Paper access cover assembly - Lift-up top/front cover
C2618-60101Cover - Top cover - Has cutouts for keypad and font cartridges
C2618A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C2618A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2618A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2618A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2618A-DisplayDisplay - Status led display (LCD display assembly).
C2618A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C2618A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C2618A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C2618A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C2618A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C2618A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C2618A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C2618A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C2128-40063Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (two used)
C2618A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C2618A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
02276-40017Gear - Idler gear - 18 tooth - Between transmission and cam gear
02276-40020Gear - Idler gear - 33 tooth - Between transmission and cam gear
02276-40022Gear - Pivot gear - Transmits motion from pivot to transmission gears
02276-40024Gear - Cam gear - Controls movement of pressure plate for picking and kicking operations
02276-40055Gear - Cluster gear - Provides gear reduction between paper motor and drive rollers
02276-40064Gear - Transmission gear - Transmits motion of pick trigger to initiate paper pick or kick cycle
02276-40116Gear - Pinion gear - 17 tooth - Controls movement of follower
C2618A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C2618A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C2618A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C2618A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
02276-40105Guide - Left wall - Supports media on left side
02276-40106Guide - Paper pusher - Pushes against media to maintain correct edge alignment
C2618A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C2618A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C2618A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
C2618A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C2618A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C2618A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C2114-80003NamePlate - Nameplate - DeskJet 500C printer logo
C2114-80004Overlay - Keypad overlay - Identifies function buttons on top cover
C2618A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
Q7981APan - Advanced High-Gloss Photo Paper - 13cm (5in) x 18cm (7in) - 20 sheets (Japan)
C2618-60102PC Board - Head driver board - Circuitry to fire print cartridge
C2618-60103PC Board - Main logic board - Circuitry to control and drive printer
C2618A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C2618A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C2618A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C2618A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
02276-40067Pivot - Black plastic part under platten - Supports pick roller
C2106-60040Plate - Pressure plate - Lifts the stack of paper to be printed
02276-00006Platen - Printer platen - Silver colored metal plate that supports paper during printing process
C2618A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
17222BPower Module - Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe)
9100-4503Power Module - Power module (transformer) - 120VAC input, 60Hz - 20VAC output, 2A output - Has attached NEMA 5-15P power cord (USA, Canada)
9100-4505Power Module - Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe)
9100-4507Power Module - Power module (transformer) - 100VAC input, 50-60Hz - 20VAC output, 2A - Has attached AC power cord (Japan)
C2618A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C2618A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C2618A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C2113-69030Print Mechanism - Complete mechanism - Carriage movement, paper picking and service station operations
C2618A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2114-40052Pulley - Idler pulley with bearing - Mounts on idler shaft
C2618A-PulleyPulley - Paper pick up tray motor pulley.
C2618A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
02276-40122Retainer - Cable retainer - Routes flex cable between the carriage and the head driver PCA
C2113-40052Retainer - Sled ramp - Plastic tumbler that retains sled for cartridges
C2113-20006Rod - Carriage rod - Shaft that the carriage assembly rides on
C2114-40051Rod - Interposer end effector rod - Interfaces between triggers and follower to initiate picking and kicking of paper
C2618A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C2618A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
02276-60056Roller - Main drive roller - Drives media through printer
02276-60094Roller - Pinch roller - Ensures contact between paper and main roller
C2618A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C2618A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C2618A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C2618A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C2618A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C2113-40001Sled - Color sled - Caps the color print cartridge when not in use
C2113-60078Sled - Sled assembly - Caps black print cartridge when not in use
C2618A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C2618A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C2618A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C2618A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
02276-00010Spring - Transmission alignment spring - Three metal fingers that hold tensions on transmission gears
02276-20016Spring - Platen spring - Maintains height of platen in relation to thickness of input paper stack
02276-20026Spring - Paper pusher spring - Provides pressure on paper pusher - Maintains correct media alignment for paper input tray
02276-20028Spring - Unloader spring - Applies tension to the unloader
02276-20030Spring - End effector spring - Flexible link between carriage and interposer end effector
02277-00005Spring - Preloader - Applies pressure to drive shaft and ensures that drive gear keeps full contact with cluster gear
1460-1940Spring - Compression spring - 302 stainless steel, passivity finish, 0.875in long, 0.36in OD, 0.026in wire diameter, 4.17 in/lb rate - On pulley wedge, for carriage belt tension
C2106-00008Spring - Pinchwheel spring - Holds pinch rollers in place
C2106-20003Spring - Paper spring - Maintains upward pressure on pressure plate
C2113-00003Spring - Sled spring - Maintains left sled alignment in sled ramps
C2618A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C4562-60018Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor'
Repair It
Exchange It
View Supplies
Service Manual
