HP parts list for C2666B DeskJet 200Cci

C2642-60206 Absorber - 'Spittoon' foam - Holds excess ink

C2666B-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C2666B-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C2666B-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

C2666B-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C2666B-Arm_Door Arm Door - Carriage access door sensor arm

C2666B-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C2666B-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C2666B-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C2666B-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C2642-60275 Base - Printer base assembly - Bottom plate of printer

C2666B-Battery Battery - Battery pack for hp printer

C2642-60216 Belt - Carriage belt - Drives the carriage assembly - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA

C2666B-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C2666B-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C2666B-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C2666B-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C2666B-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C2666B-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

C2642-60225 Bushing - Shaft sleeve bushing - Supports lower carriage rod sleeve

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

C2666B-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C2666B-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C2666B-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C2666B-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C2666B-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C2666B-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C2642-60208 Cap - Protective cap - Covers the 'Color' print cartridge nozzle when not in use

C2642-60213 Cap - Service station wire cap - Supports flex cable

C2666B-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

C2666-60204 Carriage - Carriage assembly - Includes flex circuit (to main logic board) - Should be replaced only by experienced service personnel - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA

C2666B-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C2666B-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C2666B-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C2666B-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C2666B-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C2666B-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C2666B-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C2666B-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C2666B-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

5183-5267 Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges

C3281A Cartridge - Color upgrade kit - Includes color cartridge, cartridge storage container(garage), and instruction guide - For sale in Europe ONLY

C3282A Cartridge - Color upgrade kit - Includes color cartridge, cartridge storage container(garage), and instruction guide - For sale in Asia Pacific and Latin America ONLY

C2642-60285 Chassis - Chassis (Metal) - Internal support structure for printer

C2666B-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

C2666B-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

C2666-60210 Color InkJet - DeskJet for DeskJet 200

C2666B-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C2642-60272 Cover - Back case - Back cover of printer

C2642-60273 Cover - Centronics connector cover - Connector bezel

C2666-60212 Cover - Front cover - Has cutouts for buttons and status LEDS - Does NOT include front access door

C2666B-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C2666B-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C2666B-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C2666B-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C2666B-Display Display - Status led display (LCD display assembly).

C2642-60271 Door - Front access door (Drop down door) - For accessing print cartridge

C2666B-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C2666B-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C2666B-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C2666B-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C2666B-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C2666B-Encoder Encoder - Encoder spring - provides tension for encoder strip

C2666B-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C2666B-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C2666B-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C2666B-Extender_Output Extender Output - Paper exit tray extension

C2666B-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C2666B-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C2666B-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C3835S Film - HP Premium Trans Film 250 Sht Value Pack

C3836A Film - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets

C3837A Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

C2666B-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C2666B-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C2666B-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C2666B-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C2666B-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C2666B-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C2666B-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C2666B-Gear_Station Gear Station - Gears on shaft of spittoon station

C2666B-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C2666B-Glass_Assy Glass Assembly - Main top copier glass assembly.

C2642-60239 Guide - Paper guide - Paper path through in/out pinch rollers

C2642-60248 Guide - Right paper guide (Small L-shaped metal piece)

C2642-60249 Guide - Left paper guide (Small L-shaped metal piece)

C2642-60262 Guide - Width adjust - Holds media against right wall of input tray

C2666B-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C2642-60214 Holder - Flex cable holder - Two parts - Holds flex cable to chassis

C2666B-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C2666B-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C2666B-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C2666B-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

92296E Label - LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box

92296F Label - LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per box

92296G Label - LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per box

92296H Label - LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per box

92296J Label - LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per box

92296K Label - LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per box

92296L Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 14 per sheet - 100 sheets per box

92296M Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.38cm (1.33in) labels on A4 size (21.0cm x 29.7cm) sheet - 16 per sheet - 100 sheets per box

92296N Label - LaserJet/DeskJet printer labels - 6.35cm (2.52in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 21 per sheet - 100 sheets per box

92296P Label - LaserJet/DeskJet printer labels - 10.0cm (3.94in) x 5.10cm (2.01in) labels on A4 size (21.0cm x 29.7cm) sheet - 10 per sheet - 100 sheets per box

92296R Label - LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per box

C2642-60221 Motor - Carriage drive motor assembly

C2642-60247 Motor - Service station motor for Hewlett Packard office printers.

C2666B-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C2666B-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C2666B-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

Q7981A Pan - Advanced High-Gloss Photo Paper - 13cm (5in) x 18cm (7in) - 20 sheets (Japan)

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets

C3831A Paper - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series

C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

C5973A Paper - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package

C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package

C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets

C6587AN Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art

C2666-60211 PC Board - Main logic board - Includes logic, power supply, motor and head driver electronics

C2666B-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C2666B-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

C2666B-PC_BRD_Interface PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.

C2666B-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C2642-60263 Plate - Pinch Plate - Does not include springs

C2642-60277 Plate - Pressure plate assembly - Lifts the stack of paper in the input tray

C2652-60233 Plate - Pressure Plate Lever Assembly (plate with lever) - Pushes the stack of paper up to Feed Rollers

C2642-60283 Platen - Platen Assembly - Provides printing surface for the carriage assembly

8120-6312 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia, Argentina, New Zealand, and China)

8120-6313 Power Cord - Power cord (Black) - 18 AWG two conductor 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 110-120VAC in the United States Canada Mexico Latin America and Taiwan)

8120-6314 Power Cord - Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South America, Switzerland, Denmark, Netherlands, and France)

8120-6315 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom and Singapore)

8120-6316 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)

8120-6317 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in South Africa, India, and Saudi Arabia)

8120-8441 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea)

8121-0702 Power Cord - Power cord (Black, Volex Z730966) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in India)

C2666B-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

0950-3490 Power Module - Power supply module (Yokogawa AT7001A) - 100-240VAC input, 50/60Hz, 400mA - 24VDC output, 500mA - Requires separate AC power cord - Not for use in Korea

9100-5124 Power Module - Power supply module (transformer) - 120vac input, 58-62hz - 30vdc output, 400ma - does not require separate ac power cord (usa, canada, mexico)

9100-5127 Power Module - Power supply module (transformer) - 240VAC input, 58-62Hz - 30VDC output, 400mA (Australia)

9100-5128 Power Module - Power supply module (transformer) - 220VAC input, 48-52Hz - 30VDC output, 400mA (South Africa)

9100-5129 Power Module - Power supply module - 220VAC input, 48-52Hz - 30VDC output, 400mA (China, Argentina)

9100-5130 Power Module - Power supply module (transformer) - 100VAC input, 48-66Hz - 30VDC output, 400mA (Japan)

9100-5131 Power Module - Power supply module (transformer) - 240VAC input, 48-52Hz - 30VDC output, 400mA (U. K.)

9100-5132 Power Module - Power supply module (transformer) - 230VAC input, 48-52Hz - 30VDC output, 400mA (Europe)

9100-5348 Power Module - Power supply module (transformer) - 220VAC input, 48-52Hz - 30VDC output, 400mA (Hong Kong)

C2666B-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C2666B-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

C2666B-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C2666B-Power_Supply_BRD Power Supply Board - High voltage power supply board

C2666B-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

C2642-60220 Pulley - 'Turn around' pulley assembly - Includes idler pulley and housing - Provides carriage belt tension

C2666B-Pulley Pulley - Paper pick up tray motor pulley.

C2666B-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C2666B-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C2666B-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C2642-60230 Roller - Pinch roller (Input rollers) - Mounts in bottom of paper trough assembly (Part number is for one roller)

C2642-60240 Roller - Output roller (Black foam) - Mounts to the platen assembly

C2652-60239 Roller - Feed roller assembly (Shaft with three large rollers on it) - Includes gears and clutch

C2666B-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C2666B-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

C2666B-Sensor_Exit Sensor Exit - Exit media sensor sv

C2666B-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C2666B-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C2666B-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C2666-60206 Separator - Tray separator - Separates output and input paper

C2666B-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C2666B-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C6450-60020 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1

C6450-60021 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1

C2642-60284 Service Station - Service station assembly - Does NOT include motor

C2666B-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

C2642-60222 Shaft - Lower (Main) carriage shaft - Support for lower half of carriage

C2642-60282 Shaft - Upper (Secondary) carriage rod - Supports upper half of carriage

C2666B-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C2666B-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C2666B-Speaker Speaker - Speaker assembly - includes speaker cable.

C2642-60205 Spitton - Spittoon assembly - Catches excess ink from cartridges during self cleaning cycles

C2666B-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C2642-60217 Spring - Encoder strip preload spring - Holds tension on encoder strip

C2642-60219 Spring - Belt pulley spring - Holds tension on carriage belt pulley

C2642-60229 Spring - Pinch plate spring - Holds tension on pinch plate

C2666B-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C4562-60018 Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor'

C2642-60218 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

C2642-60226 Support - Right carriage rod support (shaft sleeve)

C2652-60240 Support - Left support assembly - Includes feed roller motor and gears

C2666B-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C2666B-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C2666B-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C2666B-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C2666B-Window Window - Top/front access door assembly - print cartridge access door window.

C2113-40006 Wiper - Wiper - Cleans ink and debris from print nozzles

HP DeskJet 200Cci (C2666B)

HP parts list for C2666B HP DeskJet 200Cci Printer