C2890-80026Absorber - Ink absorber for HP OfficeJet 330 Series
C2893A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C2893A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2893A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2893A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C2893A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C2893A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C2893A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C2893A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C2893A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C2893A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C2893A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C2893A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C2893A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C2890-40076Adjuster - Adjuster - Used to adjust pen-to-paper spacing
C2890-40070Arm - Lever arm - Used to lift the pressure plate lifter
C2893A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2164-40060Belt - Carriage belt for HP DeskJet 550C Series
C2893A-Belt_ADFBelt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
C2893A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C2893A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C2893A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C2893A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C2893A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2165-00001Bracket - Left bracket - Carriage rod adjustment bracket (Left)
C2170-00008Bracket - Right bracket - Carriage rod adjustment bracket (Right)
C2890-40063Bracket - Belt tension bracket - Holds the carriage belt idler pulley
C2893A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
C2893A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
C2893A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
C2890-40042Bushing - Bushing - Supports ends of the driver roller and stripper roller
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2121-60130Cable - Cable assembly for HP DeskJet 550C Series
C2890-60011Cable - Power supply board cable - Has two 12-pin (F) connectors - 5.5cm (2.2in) long
C2890-60023Cable - Pen driver ribbon cable - 27cm (10.5in) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2893A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C2893A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C2893A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C2893A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C2893A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C2893A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2890-40068Cap - Left/right lifter cap - Holds the pressure plate lifter in place
C2890-40075Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C2893A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2890-60082Carriage - Carriage assembly - Includes flex cable and bushings
C2893A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2893A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2893A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2893A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2893A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C2893A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2893A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2893A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2893A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C2890-60052Chassis - Print mechanism chassis assembly - The base structure of the print mechanism
C2893A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
1400-1724Clamp - Clamp - Cable tie installed to top of power supply cover and main PCA shield
C2890-40031Clutch - Clutch drum - Installed between clutch spring and left bushing on shaft of stripper roller
C2893A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C2893A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2890-60013Connector - Power input connector and cable assembly
C2890-60154Control Panel - Control panel panel assembly - Does NOT include the overlay
C2893A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C2890-40001Cover - Main cover - Covers front, rear and both sides - Does not include other items such as top access cover, control panel, overlay, or paper trays
C2890-60064Cover - Top cover/access door - Includes fax/copy input tray and flip out extension for legal size documents
C2893A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C2893A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2893A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2128-00051Damper - Carriage belt damper - Installed under right end of carriage belt
C2893A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2893A-DisplayDisplay - Status led display (LCD display assembly).
C2893A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C2893A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C2893A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C2893A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C2893A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C2893A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C2893A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C2893A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C2893A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
C2893A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C3836AFilm - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3837AFilm - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C2890-40050Flag - Width sensor flag - Mounts in the main PC board
C2890-40108Flag - OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
C2893A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C2890-40015Gear - Feed gear for HP OfficeJet 330 Series
C2890-40016Gear - Kickout gear for HP OfficeJet 330 Series
C2890-40017Gear - Stripper gear for HP OfficeJet 330 Series
C2893A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C2893A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C2893A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C2893A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C4549-00002Guide - Paper guide - Holds the upper pinch rollers and springs
C2893A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C2893A-Hinge_CvrHinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
C2890-60079Holder - Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
C2893A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C2171-67806Idler - Idler pulley - Holds left end of carriage belt
C2893A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
C2893A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C2890-40056Insulator - Insulator - Installed under power supply board
C6049AIron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series
C2890-40073Kicker - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
C2890-00121Label - Serial Number Label - Attached to Rear of Main Cover
C2890-00168Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series
C2890-00091Latch - Spring latch - On side of scanner module
C2893A-Lid_Cover_AssyLid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.
C2890-40071Lifter - Separator lifter - Installed between the separator and the pressure plate lifter
C2890-40067Limiter - Rotation limiter - Limits the rotation of the pivot
C2890-60027LIU Module - Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for the U. K. )
C2890-60260LIU Module - LIU (Line interface unit) module (Australia)
C2890-60261LIU Module - LIU (Line interface unit) module (Mexico)
C2890-60262LIU Module - LIU (Line interface unit) module (Canadian English)
C2890-60263LIU Module - LIU (Line interface unit) module (Canadian French)
C2890-60264LIU Module - LIU (Line interface unit) module (Korea)
C2890-60297LIU Module - LIU (Line interface unit) module (Germany)
C2890-60298LIU Module - LIU (Line interface unit) module (Netherlands)
C2890-60299LIU Module - LIU (Line interface unit) module (United kingdom)
C4661-60144LIU Module - LIU (Line interface unit) module replacement kit - Includes module, label, instructions and removal tool (USA)
C2170-90099Manual - DeskJet family technical reference manual - Lists PCL 3 printer commands for DeskJets and OfficeJets
C2893A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
C2893A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C2893A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C2893A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C2890-60016Overlay - Control Panel Overlay (English)
C2890-60165Overlay - Control panel overlay (Mexico)
C2890-60202Overlay - Control panel overlay (French, Canadian French)
C2890-60229Overlay - Control panel overlay (Korea)
C2893A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C2890-40049Pad - Friction pad - Mounts on the rear of the upper document feed assembly
C2893A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C2893A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634ZPaper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812APaper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820APaper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824APaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C3831APaper - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series
C3833APaper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets
C5973APaper - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package
C6039APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6044APaper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes
C6817APaper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6828APaper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes
C6831APaper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets
C6944APaper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets
C6955APaper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
C6979APaper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets
C6983APaper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package
C7007APaper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets
C7013APaper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package
C7018APaper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes
C7019APaper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)
C7020APaper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets
Q2509APaper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series
Q7852APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C2893A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C2893A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C2890-40072Peg - Separator peg - Lifts the separator pad when the lifter shaft lifts
C2893A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C2890-60049Plate - Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
8120-6326Power Cord - Power cord (Dove Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
C2893A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C2893A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C2893A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C2893A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C2893A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2893A-PulleyPulley - Paper pick up tray motor pulley.
C2893A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2170-00002Retainer - Carriage rod retainer - Holds left end of carriage rod
C2162-20005Rod - Carriage rod - Supports horizontal carriage movement
C2893A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C2893A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C2893A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C2893A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C2893A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C2893A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C2893A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C2893A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C2893A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C2893A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C2890-60080Service Station - Service station assembly - Includes service station base (frame) and sled retainer
C2893A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C2124-20015Shaft - Idler shaft - Short rod on left side of print mechanism - Used to support idler pulley
C2890-60084Sled - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
C4661-60297Sled - Sled assembly replacement kit - Includes the sled assembly, PVC gloves, and replacement instructions (English)
C2893A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C5316-80011Sleeve - Document carrier sleeve - 2 full size and 2 half size sleeves - Sleeve sealed on three sides
C2893A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C2890-60015Speaker - Speaker Assembly - Installed in Right Side of Base
C2893A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C2890-60081Spitton - Spittoon assembly - Includes absorber
C2893A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2124-00001Spring - Encoder spring - Provides tension for encoder strip
C2124-00009Spring - Spring - Installed in spittoon assembly
C2124-20004Spring - Belt spring - For belt tension bracket
C2124-20008Spring - Limiter spring - Provides tension for rotation limiter
C2128-00002Spring - Kicker spring - Provides tension for the kicker
C2128-00003Spring - Helper spring - Used to lift the pressure plate assembly
C2128-00006Spring - Separator spring - Provides pressure between the separator assembly and the center drive roller
C2890-00104Spring - Stripper spring - Holds pressure against separation pad
C2890-20006Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
C2890-80014Spring - Clutch spring for HP OfficeJet 300 Series
C2893A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2124-80008Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C2890-60160Tray - Document catch tray - Installs in place of output tray cover to catch original document that is being copied or faxed - Includes installation instruction sheet
C4661-80001Tray - Wire catch tray - Attaches to paper output tray
C2893A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C2893A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C2893A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
C2890-80007Window - Window for HP OfficeJet 300 Series
C2893A-WindowWindow - Top/front access door assembly - print cartridge access door window.
C2113-40006Wiper - Wiper - Cleans ink and debris from print nozzles
Repair It
Exchange It
View Supplies
Service Manual
