RB1-7332-000CNBracket - Output tray fin bracket - Added to output tray to reduce possibility of accordion paper jams at fuser roller - Replaced by EP (Toner) door assembly
RG5-2028-000CNControl Panel - Control panel - Small board on left side of printer
RB1-7321-000CNCover - Memory expansion cover (Door) - Located on the left side of the printer
RB1-7333-000CNCover - Back cover - Has cut-outs for interface and power connectors
RG5-1995-000CNCover - Main top cover - Front left corner has hole for Face-up/ Face-down selection switch - Does NOT include the paper input assemblies
RG5-2012-070CNDelivery - Delivery assembly - Includes four white `multi-ridged` and two other delivery rollers and their associated springs
RF5-1501-030CNDoor - EP (Toner) door assembly - Fold-forward front door with nameplate - Attaches to the multipurpose input tray
RB1-7211-000CNExtender - Large paper input extender - Does NOT include smaller extender
RB1-7305-000CNFaceplate - I/O faceplate - For parallel connector
C2971AFax Module - HP PrinterPal accessory - Adds (External) fax capabilities to the LaserJet printer
RG5-1942-000CNFeeder - Feed assembly - Has idler roller, sensor flag and paper input sensors - PS 202/203
92296TFilm - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series
92296UFilm - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP
RB1-7177-000CNFrame - Paper feed frame - Main frame that parts such as pickup roller assembly and separation pad are installed on
5182-2809Fuser Assembly - Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains five new heating elements)
5182-2810Fuser Assembly - Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new heating elements)
RY7-5005-000CNGear - Gear kit - Includes first five gears on front left side area of the internal chassis - Gear kit #1
RY7-5006-000CNGear - Gear kit - Includes first four gears driven by main motor
RY7-5007-000CNGear Assembly - Fuser release assembly - Gear/tab assembly on left side of internal main chassis - Includes housing, two gears, and fuser release tab
RG5-1961-000CNGuide - Transfer guide assembly (Ribbed plastic piece) - Mounting support for the transfer roller
RG5-2013-000CNGuide - Separation guide assembly - Includes the face-up/face-down paper selection lever/deflector and fusing assembly exit roller assembly
RG5-2014-000CNGuide - Paper guide - Inside spur assembly
RG5-2015-000CNGuide - Paper guide - Outside spur assembly
RG5-2004-000CNLaser Scanner - Laser/Scanner Assy - Mounts on Top of Internal Main Chassis
RB1-7185-000CNLeg - Left leg - Small leg on left side of paper kick plate
RB1-7186-000CNLeg - Right leg - Small leg on right side of paper kick plate
RB1-7105-000CNLever - Fuser release lever - Part of fuser release assembly
RB1-7276-000CNLever - Deflects paper from fuser exit roller to face-up or face-down output bin
CK-8006-000CNLubricant - Grease for HP LaserJet 5L Series
H3971-60001Maintenance Kit - Maintenance Kit - 120V - Most common wear parts - Includes, transfer roller, pickup roller, separation pad, idler roller assembly, and fusing assembly - Procedure requires service manual
5021-8943Manual - LaserJet quick reference guide - Covers LaserJet Classic, II series, III series, 4 sereis, 5 series, 6 series and 5Si - Volume 1 of 2 volume set
5090-3390Manual - LaserJet Quick Reference Guide - Covers 1100, 2100, 3100, 4000, 5000 and 8000 series printeres - Volume 2 of 2 volume set
C3990-90991Manual - Manual for LaserJet 5L Series, LaserJet 6L Series
C6072-60301Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
C3148-67901Memory - 4MB DRAM JEIDA memory module - For LaserJets
C3148AMemory - 4MB DRAM Jeida memory module - For HP LaserJet 4LC, 5L, 6L
C3938-67901Memory - 2MB DRAM JEIDA memory module - For LaserJets
C3938AMemory - 2MB DRAM memory module - For HP LaserJet 4LC, 5L
C3939-67901Memory - 1MB DRAM JEIDA memory module - For LaserJets
C3939AMemory - 2MB DRAM Jeida memory module - For HP LaserJet 4LC, 5L
J2382-69003Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2383-61005Module - External token ring interface module - Has DB-9 connector
J2590-69001Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2592-69001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2593-69001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
J3258-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-69022Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
RH7-1282-000CNMotor - Main motor for HP LaserJet 5L Series
RB1-7335-000CNNamePlate - Nameplate - C3941A LaserJet 5L printer logo
RY7-5077-000CNPad - Printer separation pad kit - Includes main pad, spring, and two smaller subpads - Also order pickup roller assembly (RY7-5008-000CN)
5851-1468Paper - LaserJet printer family paper specification guide
C3942-69002PC Board - Formatter board - Has Bi-Tronics interface connector on board
J2590APC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J2591-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2591APC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2594-69001PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61041PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258BPC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264APC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3265GPC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101BPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102BPC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
RB1-7106-000CNPlate - Gear support plate - For gear kit #2
RF5-1517-000CNPlate - Fuser pressure plate - Guides paper over fuser roller
8120-1351Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
8120-1369Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
8120-1378Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
8120-2956Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)
8120-4211Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
8120-4753Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)
8120-6302Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
0950-3169Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0950-3171Power Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)
0950-3352Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0950-3354Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)
0957-2197Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2340Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0950-2623Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
0957-2192Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2194Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0957-2228Power Supply - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2229Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)
5188-5673Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
C3941-69001Power Supply - DC controller/power supply board - 120VAC input
C3941-69002Power Supply - DC controller/power supply board - 240VAC input
J4101-61011Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector
RB1-7334-000CNProtector - Jam prevention protector - Installs in the delivery assembly - Allows paper jams to be cleared without damaging the printer
C3941C-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RB1-7226-000CNRoller - Idler roller - Shaft with roller on both ends - Part of feed assembly
RB1-7284-000CNRoller - Delivery roller #1 - White 'Multi-ridged' roller - Four are used in delivery assembly
RB1-7285-000CNRoller - Delivery roller #2 - 2 are used in delivery assembly
RB2-1634-000CNRoller - Paper pickup roller for unit. This is the roller that goes on the paper pick up roller shaft - shaft roller assembly that feeds paper from paper input assembly. Roller only. (shaft and roller see part number RG5-3486-040CN)
RF5-1516-000CNRoller - Pressure roller - Shaft/roller with gear on left side of roller located underneath the heating element
RF5-1521-000CNRoller - Exit roller assembly - Shaft with four Black rollers - Rollers are aligned with and work in conjunction with the white 'multi-ridged' rollers of the delivery assembly
RF5-1522-000CNRoller - Fuser exit roller assembly - Shaft with two rollers - Attaches to separation guide assembly
RF5-1534-000CNRoller - Transfer roller - Located underneath toner (EP) cartridge
RG5-1964-020CNRoller - Heating element assembly (For 100VAC to 120VAC operation) - Hollow shaft with heating element inside - Yellow `Warning hot` label on top - Plastic sleeve not available separately
RG5-1965-020CNRoller - Heating element assembly (For 220V to 240V operation) - Hollow shaft with heating element inside - Plastic sleeve not available separately
RG5-3486-040CNRoller - Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit
RY7-5009-000CNSensor - Paper sensor flag/arm - Detects leading and trailing edges of paper
RF5-1492-000CNSeparator - HEWLETT PACKARD LaserJet sub pad assembly right and left pads.
C3941C-Manual_LaserService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
Repair It
Exchange It
View Supplies
Service Manual