RB2-3416-000CNArm - Media detection arm assembly - Small flag type arm with center hole for shaft - Mounts on a roller shaft in the center of the upper guide assembly
5063-1254Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
5063-1255Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.
5064-3422Cable - Telephone cable (Australia, New Zealand)
8120-8668Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long Miniconnector
8121-0811Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
8121-1037Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long
C2946ACable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
C2947ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
C3948-60102Cable - Ribbon cable - Has 30-pin (M) connectors - 9.1cm (3.6in) long
C3948-60113Cable - Telephone cable with ferrite - The wall socket end has both a 4-pin (M) connector and a 4-pin (F) tap - The other end has an RJ-ll (M) connector - 2.9m (9.7ft) long (United Kingdom)
RB2-3452-000CNCover - Pressure release lever cover - Paper jam release lever
RB2-3468-000CNCover - Left side printer door hinge cover
RB2-3469-000CNCover - Right side printer door hinge cover
RG5-3474-020CNDelivery - Delivery assembly - Attaches to the lower center area of the internal chassis - Includes four White 'multi-ridged' and two other delivery rollers and their associated springs
RG5-3485-030CNFeeder - Feed assembly - Has idler roller, sensor flag and paper input sensor
RB2-3417-000CNFlag - Paper feed sensor flag - Black plastic shaft with two arms on it (One is moved by the feeding paper, the other activates the photo sensor) - Mounts on the upper rear of the upper guide assembly
RF5-2663-000CNFoot - Rubber foot - Replacement rubber foot for the bottom support (four used)
RB1-7177-000CNFrame - Paper feed frame - Main frame that parts such as pickup roller assembly and separation pad are installed on
RG5-4678-000CNFuser Assembly - Heating element assembly (For 100V to 120V operation) - Bonds the toner to the paper with heat
RG5-4681-000CNFuser Assembly - Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
RY7-5005-000CNGear - Gear kit - Includes first five gears on front left side area of the internal chassis - Gear kit #1
RY7-5007-000CNGear Assembly - Fuser release assembly - Gear/tab assembly on left side of internal main chassis - Includes housing, two gears, and fuser release tab
RY7-5036-000CNGear Assembly - Gear kit #3 - Includes first four gears driven by main motor
RG5-3452-000CNGuide - Transfer guide assembly (Ribbed plastic piece) - Mounting support for the transfer roller
RG5-3475-000CNGuide - Separation guide assembly - Includes the face-up/face-down paper selection lever/deflector and fusing assembly exit roller assembly
RG5-3478-000CNGuide - Paper guide - Inside spur assembly
RG5-3479-000CNGuide - Paper guide - Outside spur assembly
RG5-4221-130CNGuide - Upper paper guide - Guides paper through scanner path
WT2-0317-000CNGuide - Cable guide - For the control panel cable
RB1-7185-000CNLeg - Left leg - Small leg on left side of paper kick plate
RB1-7186-000CNLeg - Right leg - Small leg on right side of paper kick plate
RB1-7105-000CNLever - Fuser release lever - Part of fuser release assembly
RB2-3453-000CNLever - Paper path lever - Selects 'In Order' or 'Straight Thru
RG5-3476-000CNLever - Face-up/face-down shaft and media deflector
CK-8006-000CNLubricant - Grease for HP LaserJet 5L Series
H3975-60001Maintenance Kit - Maintenance Kit (120V) - Includes fuser, separation pad kit, transfer roller, pickup roller, exit roller assembly, and idler roller - Procedure may require service manual (sold separately).
H3975-60002Maintenance Kit - Maintenance Kit (220V) - Includes fuser, separation pad kit, transfer roller, pressure roller, pickup roller, exit roller assembly and idler roller - Procedure requires service manual
5851-1891Manual - LaserJet quick reference service guide (monochrome) - Volume IV
C3948-90968Manual - LaserJet 3100 product user guide (English)
C3948-90971Manual - LaserJet 3100 product user guide (French, Arabic)
C3948-90975Manual - LaserJet 3100 product user guide (Nordic)
C4256-90956Manual - Manual for LaserJet 3100 Series, LaserJet 3150 Series
RB2-3393-000CNOverlay - Keypad overlay - Allows customer to notate specific fax numbers to the one touch keypad
RB2-3430-000CNPad - Separation pad - Document scanner separation pad onlyholder and frame are on the scanner unit.
RB2-4114-000CNPad - Backing pad - Plastic backing support for separation pad
RY7-5077-000CNPad - Printer separation pad kit - Includes main pad, spring, and two smaller subpads - Also order pickup roller assembly (RY7-5008-000CN)
C3948-60001PC Board - LIU - Phone line input unit - US only
C3948-60002PC Board - LIU - Phone line input unit - World wide unit
8120-6809Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
8120-6810Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
8120-6811Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
8120-6812Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan)
8120-6814Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark)
RB1-7334-000CNProtector - Jam prevention protector - Installs in the delivery assembly - Allows paper jams to be cleared without damaging the printer
C4175A-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RB1-7226-000CNRoller - Idler roller - Shaft with roller on both ends - Part of feed assembly
RB1-7284-000CNRoller - Delivery roller #1 - White 'Multi-ridged' roller - Four are used in delivery assembly
RB2-1634-000CNRoller - Paper pickup roller for unit. This is the roller that goes on the paper pick up roller shaft - shaft roller assembly that feeds paper from paper input assembly. Roller only. (shaft and roller see part number RG5-3486-040CN)
RF5-1534-000CNRoller - Transfer roller - Located underneath toner (EP) cartridge
RF5-2364-000CNRoller - Pressure roller - Shaft/roller with gear on left side of roller located underneath the heating element
RF5-2365-000CNRoller - Pressure roller - Shaft/roller with gear on left side of roller located underneath the heating element
RF5-2367-000CNRoller - Exit roller assembly - Shaft with four black rollers - Rollers are aligned with and work in conjunction with the white 'Multi-ridged' rollers of the delivery assembly
RF5-2368-000CNRoller - Fuser exit roller assembly - Shaft and rollers - Attaches to separation guide assembly
RG5-3486-040CNRoller - Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit
RG5-4772-000CNRoller - Paper pickup roller assembly for document scanner
RG5-4223-000CNScanner - Document scanner assembly - Includes gears, rollers and guides - Does NOT include image sensor assembly
RG5-4239-000CNScanner - Contact image sensor assembly - Scanner LED
RG5-4771-000CNScanner - Document scanner assembly - Includes motor, rollers and guides - Does NOT include image sensor assembly
RY7-5009-000CNSensor - Paper sensor flag/arm - Detects leading and trailing edges of paper
RF5-1492-000CNSeparator - HEWLETT PACKARD LaserJet sub pad assembly right and left pads.
RY7-5055-000CNSeparator - Scanner separation pad kit - Kit includes separation pad, separation backing pad and separation pad holder
C4175A-Manual_LaserService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
8120-6444Service Parts - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
Repair It
Exchange It
View Supplies
Service Manual