HP parts list for C4663A officejet 350 all-in-one

C2890-80026 Absorber - Ink absorber for HP OfficeJet 330 Series

C4663A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C4663A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C2890-60078 Actuator - Clutch actuator

C4663A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

C4663A-ADF_Arm ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

C4663A-ADF_Feed_Assy ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

C4663A-ADF_Input_Tray Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

C4663A-ADF_Motor ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

C4663A-ADF_Output_Tray ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.

C4663A-ADF_Pad ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.

C4663A-ADF_PC_BRD ADF PC Board - Control Board on the ADF unit

C4663A-ADF_Roller_Kit ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.

C4663A-ADF_Scanner ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.

C4663A-ADF_Sensor_BRD ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

C4663A-ADF_Unit_Assy ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.

C2890-40076 Adjuster - Adjuster - Used to adjust pen-to-paper spacing

C4663-69001 All-In-One InkJet - Replacement OfficeJet (Option ABA: US - English) - For HP repair use ONLY

C2890-40070 Arm - Lever arm - Used to lift the pressure plate lifter

C4663A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C4663A-Arm_Door Arm Door - Carriage access door sensor arm

C4663A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C4663A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C4663A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C4663A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C2890-60265 Base - Base assembly for HP OfficeJet 330 Series

1420-0524 Battery - 3.0V battery - Lithium - Type CR2450

C4663A-Battery Battery - Battery pack for hp printer

C2164-40060 Belt - Carriage belt for HP DeskJet 550C Series

C4663A-Belt_ADF Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

C4663A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C4663A-Belt_Duplex Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit

C4663A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C4663A-Belt_Scanner Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

C4663A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C2165-00001 Bracket - Left bracket - Carriage rod adjustment bracket (Left)

C2170-00008 Bracket - Right bracket - Carriage rod adjustment bracket (Right)

C2890-40063 Bracket - Belt tension bracket - Holds the carriage belt idler pulley

C4663A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C4663A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C4663A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

C4661-40006 Bridge - Bridge - Provides separation between paper in output tray and input tray

C2890-40042 Bushing - Bushing - Supports ends of the driver roller and stripper roller

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

8121-0811 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

C2890-60011 Cable - Power supply board cable - Has two 12-pin (F) connectors - 5.5cm (2.2in) long

C2890-60023 Cable - Pen driver ribbon cable - 27cm (10.5in) long

C2890-60238 Cable - Paper motor power cable

C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

C6735-80001 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

Q3500-80001 Cable - Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)

C4663A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C4663A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C4663A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C4663A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C4663A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C4663A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C2890-40068 Cap - Left/right lifter cap - Holds the pressure plate lifter in place

C2890-40075 Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place

C4663A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

C2890-60082 Carriage - Carriage assembly - Includes flex cable and bushings

C4663A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C4663A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C4663A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C4663A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C4663A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C4663A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C4663A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C4663A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C4663A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

5183-5267 Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges

C2890-60052 Chassis - Print mechanism chassis assembly - The base structure of the print mechanism

C4663A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

1400-1724 Clamp - Clamp - Cable tie installed to top of power supply cover and main PCA shield

C2890-40031 Clutch - Clutch drum - Installed between clutch spring and left bushing on shaft of stripper roller

C4663A-Clutch_ADF Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder

C4663A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

C2890-60013 Connector - Power input connector and cable assembly

C3800-60001 Control Panel - Control panel panel assembly - Does NOT include the overlay

C4663A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C2890-40001 Cover - Main cover - Covers front, rear and both sides - Does not include other items such as top access cover, control panel, overlay, or paper trays

C2890-40020 Cover - Lower automatic document feeder cover

C2890-40038 Cover - Lens cover - Installed near the rear of the scanner module assembly

C2890-60064 Cover - Top cover/access door - Includes fax/copy input tray and flip out extension for legal size documents

C4663A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C4663A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C4663A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C2128-00051 Damper - Carriage belt damper - Installed under right end of carriage belt

C4663A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C4663A-Display Display - Status led display (LCD display assembly).

C4663A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C4663A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C4663A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C4663A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C4663A-Drive_Assy_ADF Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

C4663A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C4663A-Encoder Encoder - Encoder spring - provides tension for encoder strip

C4663A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C4663A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C4663A-Extender_ADF Extender ADF - Paper extension for the automatic document feeder (ADF) input tray

C4663A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C4663A-Extender_Output Extender Output - Paper exit tray extension

C4663A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C4663A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C4663A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

C4663A-Feed_Rollers_ADF Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.

C2890-60126 Feeder - Upper automatic document feeder assembly

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C3835S Film - HP Premium Trans Film 250 Sht Value Pack

C3836A Film - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets

C3837A Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

C2890-40050 Flag - Width sensor flag - Mounts in the main PC board

C2890-40108 Flag - OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers

C4663A-Flag_ADF Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly

C4663A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C4663A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C4663A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C2162-40002 Gear - Cluster gear for HP DeskJet 500 Series

C2890-40012 Gear - Cluster gear 'A'

C2890-40013 Gear - Cluster gear 'B'

C2890-40014 Gear - Cluster gear 'C'

C2890-40015 Gear - Feed gear for HP OfficeJet 330 Series

C2890-40016 Gear - Kickout gear for HP OfficeJet 330 Series

C2890-40017 Gear - Stripper gear for HP OfficeJet 330 Series

C4663A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C4663A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C4663A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C4663A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C4663A-Gear_Station Gear Station - Gears on shaft of spittoon station

C4663A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C4663A-Glass_Assy Glass Assembly - Main top copier glass assembly.

C4549-00002 Guide - Paper guide - Holds the upper pinch rollers and springs

C4663A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C4663A-Hinge_Cvr Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.

C2890-60079 Holder - Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position

C4663A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C2171-67806 Idler - Idler pulley - Holds left end of carriage belt

C4663A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C4663A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C4663A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

C2890-40056 Insulator - Insulator - Installed under power supply board

C2890-40073 Kicker - Kicker - Restacks the paper in the paper input tray after the top sheet is removed

C2890-00168 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C3800-60013 Label - Label - For 10 'One-Touch' buttons on front panel

C4661-00001 Label - Serial Number Label - Attached to Rear of Main Cover

C4661-60012 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C4661-60014 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C4661-60015 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C4661-60016 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C4661-60017 Label - Label for OfficeJet 330 Series, OfficeJet 300 Series, OfficeJet 350 Series

C2890-00091 Latch - Spring latch - On side of scanner module

C4663A-Lid_Cover_Assy Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.

C2890-40071 Lifter - Separator lifter - Installed between the separator and the pressure plate lifter

C2890-40067 Limiter - Rotation limiter - Limits the rotation of the pivot

C2890-60027 LIU Module - Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for the U. K. )

C2890-60260 LIU Module - LIU (Line interface unit) module (Australia)

C2890-60261 LIU Module - LIU (Line interface unit) module (Mexico)

C2890-60262 LIU Module - LIU (Line interface unit) module (Canadian English)

C2890-60263 LIU Module - LIU (Line interface unit) module (Canadian French)

C2890-60297 LIU Module - LIU (Line interface unit) module (Germany)

C2890-60298 LIU Module - LIU (Line interface unit) module (Netherlands)

C2890-60299 LIU Module - LIU (Line interface unit) module (United kingdom)

C4661-60144 LIU Module - LIU (Line interface unit) module replacement kit - Includes module, label, instructions and removal tool (USA)

C2170-90099 Manual - DeskJet family technical reference manual - Lists PCL 3 printer commands for DeskJets and OfficeJets

C4661-90001 Manual - OfficeJet 330 and 350 Users Guide (English)

C4661-90002 Manual - Manual for OfficeJet 330 Series, OfficeJet 350 Series

C4661-90003 Manual - Manual for OfficeJet 330 Series, OfficeJet 350 Series

C4661-90005 Manual - Manual for OfficeJet 330 Series, OfficeJet 350 Series

C4661-90006 Manual - OfficeJet 330 and 350 users guide (Latin America Spanish, Mexico)

C4661-90011 Manual - Manual for OfficeJet 330 Series, OfficeJet 350 Series

C4661-90018 Manual - Manual for OfficeJet 330 Series, OfficeJet 350 Series

C4661-90020 Manual - OfficeJet 300/330/350 Service Manual

C4661-90031 Manual - OfficeJet 330 and 350 Installation Guide

C2124-60115 Motor - Carriage motor - Drives the carriage belt

C2164-60045 Motor - Paper stepper motor assembly (does NOT include cable)

C2890-60001 Motor - ADF paper drive motor

C4663A-Motor_ADF Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly

C4663A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C4663A-Motor_Scanner Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

C4663A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C2890-60042 Overlay - Control panel overlay (UK)

C3800-40003 Overlay - Clear overlay - For 10 'One-touch' buttons on front panel

C4663-60112 Overlay - Overlay - For front panel function keys - Model 350 (English)

C4663-60115 Overlay - Overlay - For front panel function keys - Model 350 (German)

C4663-60118 Overlay - Overlay - For front panel function keys - Model 350 (French)

C4663-60124 Overlay - Overlay - For front panel function keys - Model 350 (Dutch)

C4663A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

C2890-40049 Pad - Friction pad - Mounts on the rear of the upper document feed assembly

C4663A-Pad_ADF Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

C4663A-Pad_Tray Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C3831A Paper - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series

C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

C5973A Paper - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package

C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6587AN Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art

C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes

C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets

C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series

Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

0950-2525 PC Board - Power supply PC board

C2890-60083 PC Board - Pen driver PC board

C2890-60102R PC Board - Main PC board for HP OfficeJet 330 Series

C4661-60002 PC Board - Scanner LED array PC board

C4663A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C4663A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

C2890-40072 Peg - Separator peg - Lifts the separator pad when the lifter shaft lifts

C4663A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C2890-60049 Plate - Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers

8120-1351 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)

8120-1369 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)

8120-1378 Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

8120-1689 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)

8120-2104 Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)

8120-2956 Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)

8120-4211 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)

8120-6326 Power Cord - Power cord (Dove Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)

C4663A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

C4663A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C4663A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

C4663A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C4663A-Power_Supply_BRD Power Supply Board - High voltage power supply board

C2890-69177 Print Mechanism - Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays

C4663A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

C4663A-Pulley Pulley - Paper pick up tray motor pulley.

C4663A-Pulley_ADF Pulley ADF - ADF feeder motor pulley

C2124-20001 Rail - Rear rail - Supports carriage assembly

C4663A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C2170-00002 Retainer - Carriage rod retainer - Holds left end of carriage rod

C2162-20005 Rod - Carriage rod - Supports horizontal carriage movement

C4663A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C4663A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C2124-60116 Roller - Lower pinch roller

C2124-60162 Roller - Upper pinch roller and spring assembly

C2890-60010 Roller - Drive roller - Small diameter roller on a shaft in lower document feeder assembly

C2890-60076 Roller - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism

C2890-60193 Roller - Stripper roller - Large diameter roller on a shaft in lower document feeder assembly

C4663A-Roller_ADF Roller ADF - Feeder ADF roller for picking up paper from ADF unit.

C4663A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C4663A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

C4661-60008 Scanner - Scanner module assembly - Includes lens cover, scanner LED array, LED window, and scanner module assembly base

C4663A-Scanner Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C4663A-Scanner_Assy Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C4663A-Scanner_Belt Scanner Belt - Scanner belt attaches from the scanner to the scanner motor.

C4663A-Scanner_Cable Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

C4663A-Scanner_Motor Scanner Motor - Scanner driving motor

C4663A-Scanner_Unit Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.

C2890-40077 Sensor - Envelope sensor

C4663A-Sensor_ADF Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

C4663A-Sensor_Exit Sensor Exit - Exit media sensor sv

C4663A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C4663A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C4663A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C2128-60018 Separator - Separator pad assembly

C4663A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C4663A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C2890-60080 Service Station - Service station assembly - Includes service station base (frame) and sled retainer

C4663A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

1480-1023 Shaft - Idler shaft (dowel pin)

C2890-00074 Shield - Centronics connector shield

C2890-40107 Shield - Power supply shield

C2890-60291 Shield - Main PC board shield

C2890-60084 Sled - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly

C4661-60297 Sled - Sled assembly replacement kit - Includes the sled assembly, PVC gloves, and replacement instructions (English)

C4663A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C5316-80011 Sleeve - Document carrier sleeve - 2 full size and 2 half size sleeves - Sleeve sealed on three sides

C2890-40057 Slider - Volume control slider

C4663A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C2890-60015 Speaker - Speaker Assembly - Installed in Right Side of Base

C4663A-Speaker Speaker - Speaker assembly - includes speaker cable.

C2890-60081 Spitton - Spittoon assembly - Includes absorber

C4663A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C2124-00001 Spring - Encoder spring - Provides tension for encoder strip

C2124-00009 Spring - Spring - Installed in spittoon assembly

C2124-20004 Spring - Belt spring - For belt tension bracket

C2124-20008 Spring - Limiter spring - Provides tension for rotation limiter

C2124-20011 Spring - Pre-loader spring

C2128-00002 Spring - Kicker spring - Provides tension for the kicker

C2128-00003 Spring - Helper spring - Used to lift the pressure plate assembly

C2128-00006 Spring - Separator spring - Provides pressure between the separator assembly and the center drive roller

C2890-00104 Spring - Stripper spring - Holds pressure against separation pad

C2890-20006 Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter

C2890-80014 Spring - Clutch spring for HP OfficeJet 300 Series

C4663A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C2124-80008 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

9170-1618 Toroid - Toroid for pen driver cable

C4663A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C2890-40036 Tray - Flip-out paper input extension tray

C4661-60003 Tray - Paper input tray

C4661-60004 Tray - Paper output tray

C4661-80001 Tray - Wire catch tray - Attaches to paper output tray

C4663A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C4663A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C4663A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C2890-80007 Window - Window for HP OfficeJet 300 Series

C4663A-Window Window - Top/front access door assembly - print cartridge access door window.

C2113-40006 Wiper - Wiper - Cleans ink and debris from print nozzles

HP officejet 350 all-in-one printer (C4663A)

HP parts list for C4663A HP officejet 350 all-in-one printer