HP parts list for C4704A DesignJet 2500CP

C4723-60238 Adjuster - Adjustment kit - Includes instructions, empty cartridge, digitizing sight (magnifier) and gauge

C4704-60329 Bail - Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter

1410-0708 Bearing - Sleeve bearing - Used on left end of overdrive assembly

C4704-60207 Belt - Carriage (Y-axis) belt - Drives the carriage assembly for 36 inch size plotters. (54 inch size order C4723-60235)

C4704-00005 Bracket - Y-axis motor bracket - Includes edge wire saddle - Holds the Y-Axis motor

C1633-40082 Bushing - Pincharm spring retaining bushing

C3195-40076 Bushing - Cutter bushing - Connects cutter assembly to slider rod

C4704-40084 Bushing - Rear slider rod bushing - Spring loaded

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

92215S Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long

C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

C4704-60015 Cable - Carriage board trailing cable with ferrite - Three ribbon cables bundled together - 1.9m (6.3ft) long, 36 inches.

C4704-60021 Cable - Hard drive power cable - Has 4-pin (F) connectors - 47.6cm (18.8in) long

C4704-60022 Cable - Ribbon cable for one IDE drive - Has 40-pin (F) connectors - 31.8cm (12.5in) long

C4704-60024 Cable - Ribbon cable assembly - Has 28-pin (F) connectors - 23.5cm (9.3in) long

C4704-60025 Cable - Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.3m (4.1ft) long

C3180-40020 Cam - Pinch arm cam - Attached to pinch arm (Media) lever

C3190-60149 Cam - Left cam journal - Mounted on left end of pinch arm shaft

C6771A Canvas - Studio canvas (368 gsm) - 91.4cm (36in) x 10.7m (35ft) roll - For regular ink or UV resistant ink

C7966A Canvas - Canvas with matte finish - 61cm (24in) x 10.7m (35ft) roll (USA)

C7967A Canvas - Canvas with matte finish - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1724A Canvas - Canvas paper (180 gsm) - 91.4cm (36in) x 10.7m (35ft) roll (USA)

C2858-40043 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C4723-69096 Carriage - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included

5183-5283 Cartridge - Return kit (Box and instructions) - For returning defective large format printer ink systems covered under CREW program

C4704-40085 Clamp - Trailing cable clamp - Secures the trailing cable to the carriage assembly

C4723-40086 Clamp - Trailing cable holder

C6247A Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

C4704-00004 Cover - Modular Input/Output (MIO) cover - Mounts on top of electronics module

C4704-00021 Cover - Top cover for HP DesignJet 2000CP

C4704-00033 Cover - SIMM slot cover

C4704-40057 Cover - Electronics module left cover - Louvered cover on rear of plotter

C4704-40058 Cover - Electronics module right cover - Mounts on rear of plotter

C4704-40080 Cover - Encoder strip roof

C4704-60117 Cover - One Line sensor lens cover for carriage - Mounts to carriage assembly for HP Designjet Plotters.

C4704-60274 Cover - Electronics module cover - Mounts to rear of plotter - Includes SIMM cover

C4704-60312 Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly

C4723-60115 Cover - Right end cover - Has cut outs for the control panel

C4723-60116 Cover - Left end cover for HP DesignJet 2000CP

C4704-60077 Cross Brace - Cross-brace (E-size) - Brace that connects and supports the two stand legs

C4704-60299 Cutter - Cutter assembly - Auto cutter for rollfeed paper - Only for serial prefix ESA and ESB

C4723-60244 Cutter - Cutter assembly - Auto cutter for rollfeed paper

C4724-60021 Drive Assembly - 4.3GB hard disk drive. This Hard Disk Drive is the direct replacement part for the internal hard disk drive for the HP DesignJet 2500cp, 3500CP, 3800CP, and other models.

C4704-60033 Elevator - Elevator platform assembly - Raises and lowers ink cartridges to fill the print heads - Located on left side of plotter

C4704-60067 Enclosure - Cutter enclosure - Mounted above entry platen

9170-1687 Ferrite Assembly - Ferrite core - Installed on Y-AXIS motor cable

C7909A Film - Double matte eraseable film - 61cm (24in) x 38.1m (125ft) roll (USA)

C7910A Film - Film (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

C7911A Film - Film (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

C4723-60294 Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM

C4723-69294 Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM

C4704-40007 Flag - Service station flag - Spring loaded flag on right side of service station

C4704-60086 Foot - Foot assembly with casters (one assembly per part number)- foot assembly mounts to the bottom of the plotter stand legs, plotter requires two.

C4704-60255 Front Panel - Front (Control) panel and cable assembly for HP Designjet Plotter. Only control panel may not include overlay plastic face.

C1633-40019 Gear - Overdrive gear cluster

C1633-60030 Gear - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers.

C4705-60089 Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers

C4704-00016 Ground - Encoder ground strap - Provides ground to end of encoder strip

C4704-00035 Ground - Ground strap - Attached to Y-AXIS bracket

C4704-60295 Guard - Starguard starwheel cover assembly

C4724-69021 Hard Drive - 4.3GB hard disk drive. This Hard Disk Drive is the direct replacement part for the internal hard disk drive for the HP DesignJet 2500cp, 3500CP, 3800CP, and other models.

C4704-60218 Holder - Quick reference holder pocket - Holds quick reference guides and media knife - Mounted on rear of right end cover

C4704-60082 Housing - Housing assembly (on left side)

C4704-60095 Kit - Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips

C4704-90251 Kit - C4704A DesignJet 2500CP Quick Reference guide - English

C4704-60075 Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly

C4704-40059 Lever - Pinch arm (media) lever - Used when loading paper

C4955-80013 Light - Printhead/Cleaner Light Magent

C4704-00025 Link - Front wire link

21030 Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

6040-0855 Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML

6040-0858 Lubricant - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil

6040-0911 Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil)

C3190-60155 Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

C4723-60141 Maintenance Kit - Preventive maintenance kit - Contains Carriage Assembly, line sensor cover, encoder strip, Y-AXIS pulley, belt, motor, cutter, silicon grease, plastic surface cleaner, synthetic oil and wipes (on check out notes let us know if 36inch or 54inch plotter.)

5959-9733 Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650

5959-9734 Manual - Manual for DesignJet 2000, DesignJet 2500, DesignJet 430, DesignJet 450

C6072-60281 Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)

C6072-60301 Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)

C6240-60001 Manual - DesignJet 2000CP/2500CP PostScript drivers for Apple/Macintosh, Windows 3.1, Windows 95, and Windows NT (English)

C7779-60041 Manual - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (English)

C7769-60167 Media - Media Deflector Kit - Installed in Front of Pinch-Wheels -

C4704-60073 Media Bin - Media bin arm (Loop assembly)

C4713-60147 Media Bin - Media bin arm (Loop assembly)

1818-6171 Memory - 4MB EDO (Extended Data Output) DRAM SIMM memory module

1818-6172 Memory - 8MB EDO (Extended Data Output) DRAM SIMM memory module

C4704-60278 Memory - Post Script SIMM HEWLETT PACKARD PLOTTER SERIES

C4723-60264 Memory - 16MB, 60nS EDO (Extended Data Output) DRAM SIMM memory module

C6229A Memory - 4MB SIMM memory module - For DesignJet CP printer

C6230A Memory - 8MB SIMM memory module - For DesignJet CP printer

C6231A Memory - 16MB SIMM memory module - For DesignJet 400, 700, CP series printers

C6232A Memory - 32MB SIMM memory module upgrade - For DesignJet 400, 700, CP series printers

C4723-60114 Module - Electronics module - Includes power supply, fan, and main board

C4723-69114 Module - Electronics module - Includes power supply, fan, and main board

J2590-61011 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2590-69001 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2593-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.

J2594-61011 Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

C4704-60040 Motor - Bail motor for HP DesignJet 2500CP

C4723-60277 Motor - Carriage (Y-Axis) motor assembly - Drives carriage belt - Includes motor, motor holder, and cable

C4723-60303 Motor - X-axis motor assembly - Includes motor, belt, and worm gear -Order X-axis motor assembly kit

C4724-60053 Motor - X-Axis motor assembly kit - New design does not use a belt - Kit includes motor with attached worm gear, helical gear, motor mount, screws and nuts for mounting the parts.

C4724-69053 Motor - X-motor assembly. motor, belt, and worm gear. (same as c4724-60053)

C1633-40089 Mount - Overdrive mount block

C4704-00121 NamePlate - Nameplate - HP DesignJet 2500CP logo

6040-0990 Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil)

C4704-60213 Overdrive Assembly - Overdrive assembly - Includes overdrive shims, clutch and overdrive gear

C4704-60281 Overdrive Assembly - Overdrive assembly (B) - Includes overdrive shims, clutch and overdrive gear

C4704-60101 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (English)

C4704-60102 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Korean)

C4704-60103 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Taiwanese)

C4704-60104 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (German)

C4704-60105 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (French)

C4704-60106 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Spanish)

C4704-60107 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Italian)

C4704-60108 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Japanese)

C4704-60109 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Portuguese)

C4704-60110 Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Chinese)

C1860A Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C1861A Paper - HP Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll

C6019B Paper - Coated paper (98 gsm) - 61cm (24in) x 45.7m (150ft) roll (USA, Canada, and Latin America)

C6020B Paper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (USA, Canada, and Latin America)

C6021B Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6022B Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6023A Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6024A Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6025A Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6026A Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America)

C6029C Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll - For regular or UV resistant ink

C6030C Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll - For regular or UV resistant ink

C6778A Paper - Colorlucent backlit UV paper - 91.4cm (36in) x 30.5m (100ft) roll - For UV (pigmented) inks ONLY

C6782A Paper - Paper based semi-gloss media - 61cm (24in) x 30.5m (100ft) roll

C6783A Paper - Paper based semi-gloss media - 91.4cm (36in) x 30.5m (100ft) roll

C6786A Paper - Banner paper with Tyvek (140 gsm) - UV ink only - 61cm (24in) x 15.2m (50ft) roll

C6787A Paper - Media for HP Q1279A Banner paper with Tyvek (140 gsm) - UV ink only - 91.4cm (36in) x 15.2m (50ft) roll

C6810A Paper - Bright white InkJet paper - 91.4cm (36in) x 91.4m (300ft) roll

C7923A Paper - Basic heavyweight paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C7924A Paper - Basic Heavyweight Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C7946A Paper - Paper (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

C7949A Paper - Outdoor billboard paper - The back of the paper is blue in color - 91.4cm (36in) x 30.5m (100ft) roll (USA)

C7952A Paper - Paper (Satin) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

C7960A Paper - Paper (Backlit) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

C8281A Paper - Basic coated paper - 61cm (24in) x 45.7m (150ft) roll (USA and Asia/Pacific)

C8282A Paper - Basic coated paper - 91.4cm (36in) x 45.7m (150ft) roll (USA and Asia/Pacific)

C8310A Paper - Basic photo satin paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C8311A Paper - Basic photo satin paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C8315A Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C8316A Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific)

Q1703A Paper - Fine Art Aquarella paper - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1706A Paper - Fine Art Vanilla paper - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1709A Paper - Fine Art Cream paper - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1712A Paper - Fine Art Ice Blue paper - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1715A Paper - Fine Art Sahara Paper - 91.4cm (36in) x 10.7m (35ft) roll (USA)

Q1730A Paper - Paper for DesignJet 5000 Series, DesignJet 800 Series, DesignJet 500, DesignJet 3500

Q1733A Paper - Paper for DesignJet 800 Series, DesignJet 1055 Series, DesignJet 5000 Series, DesignJet 500

Q1736A Paper - Paper (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500

Q1739A Paper - Heat Transfer Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA)

Q1742A Paper - Paper (Fabric) for DesignJet 5100 Series, DesignJet 3000, DesignJet 5000 Series, DesignJet 3500

Q1757A Paper - Paper for DesignJet 5000 Series, DesignJet 800 Series, DesignJet 500, DesignJet 3500

Q1760A Paper - Paper for DesignJet 5100 Series, DesignJet 3000, DesignJet 500, DesignJet 5000 Series

C4704-60009 PC Board - Refill interconnect board

J2555-69013 PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J4100-69001 PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

J2552B PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors

J2555B PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors

J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2594-69001 PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

C4723-60247 Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing

C4704-60294 Platen - Entry platen assembly - Cover/guide that is next to the paper drive (platen) roller

C4704-60343 PostScript - PostScript SIMM kit - Version 8.1.01

C4704-69343 PostScript - PostScript SIMM kit - Version 8.1.01

8120-0698 Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)

8120-1378 Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

8121-0877 Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)

J2337-60001 Print Server - LAN Interface Board with EtherTwist (10Base-T) and ThinLAN

J2372-60001 Print Server - LAN Interface Board with EtherTwist (10Base-T) and ThinLAN

J2554-61015 Print Server - LAN and LocalTalk Interface - EtherTwist (10Base-T), ThinLAN

J2555-61016 Print Server - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J2591-61011 Print Server - External JetDirect LAN Interface Module with EtherTwist

J2593-61011 Print Server - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.

J3265A Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4100-61001 Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

C6236A Printhead - DesignJet CP ink system storage container - Holds printheads and printhead cleaners when not in use

C4704-60020 Pulley - Idler pulley - For carriage (Y-axis) belt - On right end of plotter

C4723-60249 Refill Assembly - Refill assembly - Mounted inside the left hand cover - Includes motor and gears

C4704A-Repair_DesignJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C4700-60042 Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder

C4704-60199 Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs

0460-2536 Saddle - Edge wire saddle for Y-axis bracket

0515-2200 Screw - Screw Tptt-AP MOQ=Mult

0591-0090 Screw - Plastite screw (threaded insert mold-in, Textron K40) - M4.0 x 0.7, 20mm long, Torx T15

0624-0795 Screw - Screw Filter

C4704-60029 Sensor - Right end cover and window closed sensors - Includes cable and connector

C4704-60052 Sensor - Pincharm sensor

C4704-60058 Sensor - Left end cover sensor - Includes cable and connector

C4704-60195 Sensor - Media sensor assembly

C4723-60071 Sensor - Take-up reel sensor assembly

C4723-60096 Sensor - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included

C4723-69071 Sensor - Take-up reel sensor assembly

C4704A-Manual_DesignJet Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.

C7769-90066 Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes

C6020A Service Parts - HP Coated Paper 36-inch x 150 ft 98 gsm

C7886A Service Parts - LF Proofing Gloss

Q1254-60025 Service Parts - English/korean for HP 32054F

Q1745A Service Parts - Paper Backed Fabric Polyester - 91.4cm (36in) x 10.1m (33ft) roll (USA)

Q1748A Service Parts - Paper Backed Fabric Silk Satin - 91.4cm (36in) x 10.1m (33ft) roll (USA)

C4723-60276 Service Station - Service station assembly for Hewlett Packard Designjet Plotters.

C2848-60032 Shaft - Pincharm shaft assembly - Includes cam journals mounted on each end

C6071-60368 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Japanese)

C6072-60284 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)

C6072-60285 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)

C6072-60286 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60287 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)

C6072-60304 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)

C6072-60305 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)

C6072-60306 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60307 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)

C7779-60040 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Chinese)

C7779-60042 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Korean)

C7779-60043 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Taiwanese)

C7779-60044 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (German)

C7779-60045 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (French)

C7779-60046 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Spanish)

C7779-60047 Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Italian)

C4723-60147 Spacer - Spacer/media guide for the supply spindle

C4704-60317 Spindle - Rollfeed spindle rod assembly - Includes flange and core spindle spacer

C6246-60010 Spindle - 36-inch take-up reel spindle assembly

C7769-60401 Spindle - Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper, spindle takes one on each side. Part number is for one pc.

C1633-80004 Spring - Extension spring - Holds the rollfeed access cover closed

C1633-80005 Spring - Compression spring - Installed between pincharm assembly and bushing

C1633-80014 Spring - Compression spring - For the rear bushing on the carriage

C4699-00016 Spring - Encoder spring for HP DesignJet 510ps

C4704-80009 Spring - Service station spring

C4704-60143 Starwheel - Big starwheel mount assembly - Includes cover, body, spring and two starwheels

C4713-60035 Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels

C4704-40070 Strip - Capping strips ( E-size) - Two strips that snap together on the ends of the bin arms

C4704-60224 Strip - Encoder strip - Used to determine carriage position, 36inch.

C4704-40026 Support - Roller support bracket

C4714-60147 Support - Media bin support (E-size)

C4723-60072 Support - Take-up reel left hand support assembly

C6246-60009 Support - Take-up reel support assembly

C4704-60056 Switch - Power switch - Includes cable

C4704-60261 Switch - Stand-by switch asembly

C6246A Take Up Assembly - Take-up reel kit for DesignJet 2000CP/2500CP - Includes take-up reel spindle assembly, left and right take-up reel supports, take-up reel sensor assembly, empty core tubes, and media weight tubes

C4723-60063 Tensioner - Y-axis tensioner assembly - Applies tension to carriage belt - Includes wedge, tensioner spring, and housing

C4704-60084 Tray - Plotter stand tray assembly

C4704-60113 Trim - Right trim assembly - At right of entry platen

C4723-60111 Trim - Left trim assembly - At left of entry platen

C6246-60011 Tube - Media weight and core kit for the take-up reel

C6021A Weight - HP Heavyweight Coated 24-inch x 100 roll

C6022A Weight - HP Heavyweight Coated 36-inch x 100 roll

C4704-60087 Window - Lift-up viewing window

HP DesignJet 2500CP (C4704A)

HP parts list for C4704A HP DesignJet 2500CP Printer