C1633-40082Bushing - Pincharm spring retaining bushing
C2858-40017Bushing - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly
13242GCable - RS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long
17255DCable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
17302ACable - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
31391ACable - RS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
A6144-63008Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
C2913ACable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C3195-60056Cable - Power supply cable - Has 12-pin (F) connectors - 9.5cm (3.7in) long
C3195-60057Cable - Ribbon cable assembly (Black) - Contains a 12 wire 82.6cm (32.5in) cable and a 14 wire 96.5cm (38in) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked 'SVS', 'Bail', and 'Primer', a 4-pin (F), and a 4-pin (M)
C3195-60102Cable - Ribbon cable with ferrite - Has 5-pin (F) connectors - 16.5cm (6.5in) long
C3195-80009Cable - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
C2847-20005Cam - Pinch arm bar cam (D-size) - Long rod from left to right side of printer - Used to lift the pinch arms
C2858-40043Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C3172-40006Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C4708-69113Carriage - Pen carriage assembly - Drafting `Head` for the plotter (holds tri-color and one black ink cartridges) - Front bushing is included and cannot be ordered separately
C4698AColor Kit - Color management kit - Includes pantone tables for Windows and Macintosh applications, Kodak precision profiles, Photoshop and IGC profiles in 4 disks, and color management user guide
C3195-00009Cover - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
C3195-40047Cover - Housing cover (L-shaped) - Right side cover (Cap) for the power switch housing (for enclosing the power switch)
C3195-60039Cover - Cover assembly - Metal center cover that lift-up viewing window mounts to - Includes `T` shaped latches and mounting screws
C3195-60053Cover - Back cover/panel - Metal cover for the electronic enclosure assembly
C4705-60084Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs
C4705-60088Cover - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
C4705-60106Cover - Left end cover for HP DesignJet 750C Series
C4705-60114Cover - Right end cover - Has cut outs for the control panel buttons lights and display - Does NOT include an overlay
6040-0855Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
C3195-69166Maintenance Kit - Maintenance kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil
C4705-60023Manual - DesignJet 700/750C Plus manual kit - Includes users guide, Quick Reference Guide, and front panel overlay (Taiwan)
C4705-90000Manual - DesignJet 700, 750C, 750C plus and 755CM service manual (2nd edition, August 1996) - Note: Coverage limited to C3195A, C3196A, C3198A, C3198B, C4705A, C4706A, C4708A, and C4709A. Pick on C3196A-Manual
C6072-60281Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)
C6072-60301Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
C7779-60041Manual - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (English)
C4705-60097Media Bin - Media bin - Wire rack that mounts to the plotter stand legs and cross brace
J2382-69003Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2590-69001Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2592-69001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-69022Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C3195-60009Motor - Bail stepper motor - Used to drive the bail assembly
C3195-60112Motor - Carriage drive motor assembly - Includes motor and cable
C4705-60068Motor - Paper (X-axis) drive motor (includes helical drive gear - NOTE: motor and gear are only sold as a set
C4708-00020NamePlate - Nameplate - DesignJet 750C Plus logo
C6429-69365PC Board - Rstrd C6429-60365 Main Logic Pca Dj95xc 2m
J2550-69013PC Board - EtherTwist 10Base-T LAN interface board
J2555-69013PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
J4100-69001PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
J2550BPC Board Interface - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
J2552BPC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
J2555BPC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
J2590APC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J2591-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2591APC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2594-69001PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61041PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258BPC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264APC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3265GPC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101BPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102BPC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C3195-00031Pin - Shipping Material/Carton for DesignJet 700 Series, DesignJet 750
C4705-60091Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rollers - Does NOT include spring or bushing
C4707APostScript - Adobe PostScript level 2 upgrade kit - Includes postscript ROM SIMM, Windows/Mac driver software and documentation
8120-2104Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
8120-2956Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)
8120-4211Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
8120-4753Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)
8120-6302Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
8121-0877Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)
0957-2340Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C8954-90013Reference - Reference Guide - North America
C4708B-Repair_DesignJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4699-60042Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C6455-60056Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges
C4704-60199Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs
C4708B-Manual_DesignJetService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
C7769-90066Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes
9223-0834Service Parts - STRPG-NM POLYP 1-IN-WD;AUTH SVCE & ASP's ONLY
C6071-60368Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Japanese)
C6072-60284Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)
C6072-60285Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)
C6072-60286Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60287Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)
C6072-60304Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)
C6072-60305Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)
C6072-60306Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60307Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)
C7779-60040Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Chinese)
C7779-60042Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Korean)
C7779-60043Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Taiwanese)
C7779-60044Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (German)
C7779-60045Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (French)
C7779-60046Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Spanish)
C7779-60047Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Italian)
C2847-60093Spindle - Rollfeed spindle rod assembly (D-size 24 inch ) - Includes spindle and end caps
C3172-60003Spindle - Rollfeed spindle rod assembly (D-size) - Includes spindle and end caps - Special unit for use in China
C3172ASpindle - D/A1 rollfeed spindle rod assembly for DesignJet 6xx/7xx - Includes spindle and end caps
C3195-60027Spitton - Spittoon assembly - Contains absorbers which hold excess ink from cartridges
C1633-80005Spring - Compression spring - Installed between pincharm assembly and bushing
C1633-80014Spring - Compression spring - For the rear bushing on the carriage
C3195-80002Spring - Compression spring - For the pulley wedge - Applies tension to the carriage belt
C4699-00016Spring - Encoder spring for HP DesignJet 510ps
C3862AVellum - HP Vellum Paper is ideal for reproducible final drawings. Offers crisp, archivable line drawings and sharp text and uniform solid areas. 75-g/m� (20-lb) weight provides excellent handling and durability. The HP Designjet printing solution�printer.
C3864AVellum - Vellum (75 gsm) - D size (22 x 34-inches), 20 lb, 3.0 mil - 100 sheets
C3866AVellum - Vellum (75 gsm) - Architectural D size (24 x 36-inches), 20 lb, 3.0 mil - 100 sheets
C3195-40039Wedge - Pulley wedge tensioner - For carriage (Y-axis) belt tension