C5352A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C5352A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C5300-40027Actuator - Push rod - Power switch actuator shaft (with button)
C5352A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C5352A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C5352A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C5352A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C5352A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C5352A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C5352A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C5352A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C5352A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C5352A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C5352A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C4555-40043Adjuster - Z axis service station adjustment (ZASSA)
C5300AAll-In-One InkJet - HP officejet pro 1150c all-in-one printer
C4555-40066Arm - Clutch actuator arm - Used to engage the pivot gears
C5364-69006Arm - Carriage motor - Provides power for carriage belt
C5352A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C5876-40012Base - I/O tray base - Supports I/O tray assembly
C2145-40056Belt - New# C4531-40009 Belt Attach-Use Old 1st
C2145-40058Belt - Drive belt - For the print mechanism carriage assembly
C5300-40038Belt - Drive belt - For the scanner carriage assembly
C5352A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C5352A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C5352A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C5352A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C5352A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C5352A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C5352A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C5352A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C5352A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C5352A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C5352A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C5352A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C5352A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C5352A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C5352A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C5300-60009Control Panel - Control panel assembly - Mounts to the front panel - Does NOT include the bezel or ribbon cable - Available for trade sales in Europe - Available for authorized service centers only in USA
C5352A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C5352-69001Copier - Replacement color copier 120 (Not available in europe) - Does NOT include the control panel bezel
C5300-40009Cover - Screw head cover - Snap on cover which covers the recessed screw heads in front of the scanner copyboard (2 used)
C5300-60015Cover - Document cover assembly - Lift-up scanner bed cover - Includes the cover, foam pressure pad, and hinge assembly
C5352-40001Cover - I/O port slot cover - Covers the disabled interface connector slot
C5352A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C5352A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C5352A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C5352A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C5352A-DisplayDisplay - Status led display (LCD display assembly).
C5300-40014Door - Pen cartridge door - Access door for changing the printer ink cartridges (Mounts on left end of the scanner)
C5352A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C5352A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C5352A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C5352A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C5352A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C5352A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C5352A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C5352A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C5352A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
C5352A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C5352A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C5352A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C3836AFilm - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3837AFilm - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C5352A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C5352A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C5352A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C5352A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C5352A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C5352A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C5352A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C5352A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C5352A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
6040-0990Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil)
C5352A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C5352A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C5352A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
C5352A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C5352A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C5352A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C5352A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
8120-1369Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
8120-1378Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-6329Power Cord - Power cord (Dove Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in South Africa and India)
8120-6330Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
8120-6331Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
8120-6809Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
8120-6811Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
8120-6870Power Cord - Power cord (Dove Gray) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 220VAC in Argentina)
8120-6978Power Cord - Power cord (Dove Gray) - 18 AWG, 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 220VAC in Chile)
C5352A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C5352A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C5352A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C4531-60014Pressure Assembly - Pressure plate assembly - Lifts paper stack to be printed
C5300-69076Print Mechanism - Replacement print mechanism assembly - Includes the print mechanism assembly (with motors) , service station assembly, and scanner base assemblies
C5352A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C5352A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C5300-20002Rod - Scanner rod - Shaft that the scanner carriage assembly rides on
C5300-40036Rod - Actuator rod - Vertical rod with cam - Actuates power switch on power supply board
C5352A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C5352A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C5300-60106Scanner - Scanner carriage assembly - Includes lamp
C5352A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C5352A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C5352A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C5352A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C5352A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C5352A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C5352A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C5352A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C5352A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C5300-60043Service Station - Service station assembly - Does NOT include motor, tools, or instructions
C5300-60077Service Station - Service station assembly with tool and instructions - Does NOT include motor
C5352A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C5300-00022Shield - Fan finger guard (shield) - Mounts on the back side of the fan and fan gasket
C5352A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C5352A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C5300-40017Spacer - Fan spacer - Retains the fan filter and fan in the gasket
C5352A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C5352A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C5352A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2145-00042Stiffener - Encoder stiffener - Prevents oscillation of encoder strip
0460-2555Tape - Scanner ESD tape - 1/2 inch wide by 72 yards long - Adhesive backed polyester film - Used to cover the scanner aperture after scanner bezel is removed - Keeps dust out of scanner
C5352A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C4531-40017Tray - Right wing - Holds printed document after being ejected - Part of the input/output paper tray assembly
C5300-60007Tray - Input/output paper tray assembly - Holds 150 sheets
C5364-60339Tray - Input/output paper tray assembly
C5352A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C5352A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C5352A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
C5300-40008Trim - Rear trim strip (border) - At the rear of the copyboard glass
C5300-60013Trim - Trim strip (border) - At right side of the scanner glass pane
C5300-60014Trim - Trim strip (border) - In front of the scanner glass pane
C4555-60068Turnaround Assembly - Turnaround assembly - Holds belt tension components in place
C5352A-WindowWindow - Top/front access door assembly - print cartridge access door window.
C4531-40016Wing - Left wing - Holds printed document after being ejected - Part of the input/output paper tray assembly
Repair It
Exchange It
View Supplies
Service Manual
