HP parts list for C6410A DeskJet 895Cxi

C5870-80007 Absorber - Spittoon sponge - Absorbs excess ink from cartridges

C6410A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C6410A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C6410A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

5188-6700 Adapter - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector

C6409-40021 Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel

C6410A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C6410A-Arm_Door Arm Door - Carriage access door sensor arm

C6410A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C6410A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C6410A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C6410A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C5870-40013 Assembly - Zassa

C5870-40051 Assembly - Zassa

C6409-00013 Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel

C6410A-Battery Battery - Battery pack for hp printer

C5870-40031 Bearing - Bearing-Feedroller

C4557-40049 Belt - Carriage drive belt - Moves printhead side to side

C6410A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C6410A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C6410A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C2145-00037 Blade - ESD blade for HP DeskJet 870C Series

C4557-40128 Brace - Left backbone brace - Provides support for backbone

C4557-40130 Brace - Left wall brace - Provides support for left wall

C5870-40020 Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone

C5870-00010 Bracket - Paper motor mounting bracket

J3263-40003 Bracket - Mounting bracket (plastic clip) - Holds the JetDirect print server module on the rear panel of the printer

C6410A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C6410A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C6410A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

C4557-60022 Cable - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long

C4557-80075 Cable - Carriage assembly flex cable - 40.3cm (15.9in) long

C5870-60140 Cable - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long

C6518A Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long

C6410A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C6410A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C6410A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C6410A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C6410A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C4557-40034 Cam - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position

C6409-40040 Cam - Pick cam - Controls pressure plate and lever

C6410A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C6410A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

UG605E Care Pack - HP 2 year Care Pack w/Next Day Exchange for Printers

C6409-40031 Carriage - Ink cartridge carriage

C6409-60003 Carriage - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel

C8173-67201 Carriage - Ink cartridge carriage hp deskjet 1180 1280 9300 1220 1125

C6410A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C6410A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C6410A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C6410A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C6410A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C6410A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C6410A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C6410A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C6410A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

C4557-60021 Case - Sidecase Assy Right

C5870-00006 Channel - Width adjust channel

C6410A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

C5870-00002 Clip - Service station ESD grounding clip

C6410A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

C6410A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C4557-60020 Cover - Left side case for HP DeskJet 700 Series

C5870-40016 Cover - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly

C6409-60162 Cover - Right side case

C6411-40008 Cover - Main logic PCA cover - Has cut outs for the USB interface socket, parallel interface socket, and power module socket

C6410A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C6410A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C6410A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C6410A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C6410A-Display Display - Status led display (LCD display assembly).

C4557-40026 Door - Output door - Separates output media from input media

C4557-60076 Door - Rear cleanout door assembly - Paper jam cleanout door

C6409-40014 Door - I/O and power input cable covering door

C6409-60015 Door - Top/front access door assembly - Print cartridge access door with transparent gray window

C6458-60001 Door - Top/front access door assembly - Print cartridge access door with strawberry colored window - Includes installation instructions

C6458-60002 Door - Top/front access door assembly - Print cartridge access door with strawberry colored window - Does not include installation instructions

C6458A Door - Top/front access door assembly - Print cartridge access door with Strawberry colored window - Replaces the existing door

C6459-60001 Door - Top/front access door assembly - Print cartridge access door with lime window - With installation instructions

C6459-60002 Door - Top/front access door assembly - Print cartridge access door with lime colored window - Does not include installation instructions

C6459A Door - Top/front access door assembly - Print cartridge access door with Lime colored window - Replaces the existing door

C6460-60001 Door - Top/front access door assembly - Print cartridge access door with tangerine colored window - Includes installation instructions

C6460-60002 Door - Top/front access door assembly - Print cartridge access door with tangerine window - Without installation instructions

C6460A Door - Top/front access door assembly - Print cartridge access door with Tangerine colored window - Replaces the existing door

C6461-60001 Door - Top/front access door assembly - Print cartridge access door with grape colored window - Includes installation instructions

C6461-60002 Door - Top/front access door assembly - Print cartridge access door with grape colored window - Does not include installation instructions

C6461A Door - Top/front access door assembly - Print cartridge access door with Grape colored window - Replaces the existing door

C6462-60001 Door - Top/front access door assembly - Print cartridge access door with blueberry colored window - Includes installation instructions

C6462-60002 Door - Top/front access door assembly - Print cartridge access door with blueberry colored window - Does not include installation instructions

C6462A Door - Top/front access door assembly - Print cartridge access door with Blueberry colored window - Replaces the existing door

C6410A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C6410A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C6410A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C6410A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C6410A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C4557-60030 Encoder - New#c6409-60200 Utg/Paper Encoder Pca

C4557-80019 Encoder - Paper motor encoder disk

C6410A-Encoder Encoder - Encoder spring - provides tension for encoder strip

C6410A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C6410A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C6410A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C6410A-Extender_Output Extender Output - Paper exit tray extension

C6410A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C6410A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C6410A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

9170-1655 Ferrite Assembly - Ferrite core for HP OfficeJet K60

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C3837A Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

C5870-40024 Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide

C6410A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)

C6410A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C5870-40039 Frame - Wing frame - Chassis for in/out tray components

C6410A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C4557-40007 Gear - Pick gear for HP Color Copier 170

C4557-40021 Gear - Feed roller idler gear

C4557-40079 Gear - Transfer gear (double gear)

C4557-40095 Gear - Encoder gear for HP Color Copier 260

C4557-40102 Gear - Feed roller cluster gear

C5870-40017 Gear - Cluster gear (large gear)

C6410A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C6410A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C6410A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C6410A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C6410A-Gear_Station Gear Station - Gears on shaft of spittoon station

C6410A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C6410A-Glass_Assy Glass Assembly - Main top copier glass assembly.

C4557-40013 Guide - Rear paper guide - Guides media through rear of printer

C4557-40020 Guide - Lower guide - Platform for seperator peg, spring and pad

C4557-40121 Guide - Encoder disk guide

C5870-40037 Guide - Length adjuster - Media input length adjuster

C6409-40022 Guide - Upper paper guide - Guides media through paper path

C6409-40030 Guide - Spring guide for HP DeskJet 880C Series

C6409-40034 Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment

C6410-40005 Guide - Width adjust (Purple) - Holds media against right wall of input tray

C6410A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C6409-80031 Holder - Right carriage restraint (holder) - Used to protect the carriage assembly from damage during shipment

C6410A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C6410A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C6410A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C6410A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series

C6050A Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series

C6065A Iron On Transfers - Iron-On Transfers for DeskJet 6620 Series, OfficeJet V40 Series, PSC 2100 Series All in One, DeskJet 640 Series

C4557-60009 Keypad - Keypad assembly

C4557-40090 Knob - Rear cleanout door knob

C4557-80057 Label - Front panel label - Includes kodak image enhancements

C4557-40042 Latch - Plastic latch (Y-shaped)

C4557-60045 Latch - Cartridge latch (Black) - Holds black ink cartridge in place

C4557-60046 Latch - Cartridge latch (Color) - Holds color ink cartridge in place

C6426-40146 Latch - Cartridge latch (Black) - Holds black ink cartridge in place

C4557-00037 Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker

C5870-40022 Lever - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment

C6411-40006 Lever - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper

C4557-40063 Lifter - Separator lifter - Used to lift the separator peg

C4557-40085 Link - Link pin for HP Color Copier 160

C6429-60025 Link - Kicker bar cam link (spring loaded)

C6410-90179 Manual - DeskJet users guide for Microsoft Windows (English)

C6413-90023 Manual - Manual for DeskJet 880 Series, DeskJet 895 Series, DeskJet 895, DeskJet 800 Series

J3264-61001 Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3264-69001 Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3265-61001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

J4102-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-69022 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

C4557-60003 Motor - Carriage motor assembly (Includes pulley)

C5870-60004 Motor - Service station motor assembly - Includes PC board and gear

C6409-60004 Motor - Paper advance motor

C6410A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C6410A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C6410-40001 NamePlate - Nameplate - DeskJet 895CXI printer logo

C6410-40003 NamePlate - Nameplate - DeskJet 895Cse printer logo

C6410A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

C4557-80027 Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster

C4557-60086 Pallet - New# C6426-60054 Pallet/Link

C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts

C4557-40098 Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel

C4557-40099 Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel

C4557-40116 Panel - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame

C5870-40019 Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1821A Paper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets

C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets

C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package

C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets

C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets

C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets

C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6042A Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer

C6043A Paper - Paper (Photo) for DeskJet 1100 Series, DeskJet 1120 Series, DeskJet 1220 Series, DeskJet 1200 Series

C6044A Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes

C6045A Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes

C6055A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6057A Paper - Paper (Photo) for DeskJet 2500C Series, DeskJet 2000 Series, DeskJet 700 Series, DeskJet 890 Series

C6587AN Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art

C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes

C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets

C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series

Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C4557-40016 Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked

C4557-60062 PC Board - Banner PCA and cable assembly

C6409-40012 PC Board - New# C6409-40050/ Cover-Pca

C6409-60002 PC Board - Ink cartridge carriage PC board

C6409-60161 PC Board - Pca.Mn. Dj895xx Mrom2m Ord C6409-60201

C6409-60184 PC Board - New#c6409-60201/Utg Pca Dj895xx Rom 2m

C6409-60200 PC Board - Paper encoder PCA - Controls operation of paper motor

C6409-60237 PC Board - Ink cartridge carriage PC board

C6410A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C6419-60060 PC Board - Main Logic PC Board - Can be Configured for Arabic, Greek,

C6419-69110 PC Board - Main logic PC board - Configured for English font

C6419-69111 PC Board - Main logic PC board - Can be configured for Arabic, Greek, Cyrillic, Hebrew, Lithuanian, Latvian, or Thai fonts

C6410A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

C6410A-PC_BRD_Interface PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.

J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors

J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3263-61011 PC Board Interface - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network

J3263-61031 PC Board Interface - Lan Adp Smo Kit Rohs

J3263-69011 PC Board Interface - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network

J3263G PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

J4102B PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

0515-2901 Pin - Scr-Tapping Assy

C4557-20025 Pin - Pin-X3 Datum

C5870-40029 Pin - Separator peg for HP DeskJet 895C

C6410A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C4557-40014 Plate - Back Plate - Holds Latch Spring, Knob and Latch Components of Rear Cleanout Assembly

C6409-40028 Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt

C6409-60038 Plate - Shift Plate Assy

C6429-60016 Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two

C6455-60057 Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly

8120-8336 Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)

8120-8337 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)

8120-8341 Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)

8120-8345 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)

8120-8346 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China)

8120-8900 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900

8121-0022 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)

8121-0023 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)

C6410A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

0950-3349 Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A

0950-3350 Power Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)

0950-3351 Power Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

0950-3352 Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

0950-3354 Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)

0957-2110 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2134 Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

0957-2340 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2481 Power Module - Pwra brk uni 12vdc 15w

5188-5676 Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)

9100-5176 Power Module - Pwer supply, 13v/300ma jpn

C6409-60014 Power Module - Power supply module - 100V/240V, 50/60Hz - Requires separate AC power cord - For worldwide use

C6410A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C6410A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

0957-2194 Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

0957-2229 Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)

5188-5673 Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A

C6410A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C6410A-Power_Supply_BRD Power Supply Board - High voltage power supply board

C6409-60106 Print Mechanism - Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station operations - For use in India only

C6410A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

C6429-60225 Print Mechanism - DeskJet 970Cxi - Does not include power cord - Configured for English font

J3263-61001 Print Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network

J3263-69001 Print Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network

J3263A Print Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN

J3265A Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101-61011 Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector

C6410-69003 Printer - Replacement DeskJet 895CXI printer - For HP repair use only - Not for Europe - Does not include power module or power cord

C6410-69004 Printer - Replacement DeskJet 895CXI printer - For HP repair use only - For Europe - Does not include power module or power cord

C6410-69005 Printer - Replacement DeskJet 895CSE printer - For HP repair use only - Does not include power module or power cord

C6410A-Pulley Pulley - Paper pick up tray motor pulley.

5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

C6410A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C4557-00024 Retainer - Ferrite retainer - Holds head drive flex cable ferrite

C4557-20026 Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage

C6409-80030 Retainer - Left carriage retainer - Protects the carriage assembly from damage during shipment

C6409-20004 Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel

C6410A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C6410A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide

C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide

C4557-60025 Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder

C5870-40030 Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel

C5870-60092 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA

C6409-60037 Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel

C6426-60049 Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings

C6410A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C6410A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

0515-2873 Screw - Screw-Sidecase

0515-2902 Screw - Screw-Tapping

C6410A-Sensor_Exit Sensor Exit - Exit media sensor sv

C6410A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C6410A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C6410A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C4557-60011 Separator - Separator pad for HP DeskJet 700 Series

C6410A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C6410A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C6450-60020 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1

C6450-60021 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1

0515-2849 Service Parts - Scr-M3x14 Taptite

0515-2898 Service Parts - Scr-M3x5

C4557-40006 Service Parts - New# C5870-40031

C4557-40011 Service Parts - New#c5870-40026

C4557-40019 Service Parts - New#c5870-40024

C4557-60007 Service Parts - New#c5870-60140

C4557-60035 Service Parts - New#c6409-60038

C4557-80058 Service Parts - New# Use Old#

C4557-80059 Service Parts - New# Use Old#

C5870-40026 Service Parts - New#c6409-40022

C5870-60093 Service Parts - New# C6409-60037

C6409-00012 Service Parts - New#c4557-00042

C6409-60119 Service Parts - Order: C6429-60025

C6409-60135 Service Parts - Order C6409-60236

C6409-60201 Service Parts - Order: C6409-60224

C6410-69002 Service Parts - DJ895CSE UN W/Flash

C6410A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

C4557-20027 Shaft - Cartridge latch shaft near top of carriage

C4557-40066 Shaft - Drive shaft with molded gears on each end

C4557-60002 Shaft - New Part#c6426-60049/Utg Pick Shaft Assy

C4557-00038 Shield - Paper motor ESD shield

C6409-00007 Shield - Main logic PCA EMI shield

C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)

C6410A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C5870-40036 Slider - Integrated slider for carriage assembly

C6410A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring

C4557-40150 Snap - Pivot snap - Used to hold pivot to pick feed roller shaft

C6410A-Speaker Speaker - Speaker assembly - includes speaker cable.

C5870-40014 Spitton - Spittoon base - The bottom of the service station assembly

C6410A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C2145-00033 Spring - ESD spring - Installed between ESD blade and carriage PC board

C2145-60040 Spring - X Bias Spring Assy

C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller

C4557-00011 Spring - Drawer spring - Holds input drawer in place

C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt

C4557-00018 Spring - Encoder spring - Provides tension for encoder strip

C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges

C4557-00029 Spring - Left wall spring (front) - Holds left wall assembly in position

C4557-00030 Spring - Left wall spring (rear) - Provides pressure against media

C4557-00031 Spring - Paper length adjuster spring - Provides tension for paper input length adjuster

C4557-00033 Spring - Link spring - Provides tension to shaft of pick cam gear

C4557-00035 Spring - Paper pusher spring - Maintains alignment in paper tray

C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller

C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide

C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly

C4557-20020 Spring - Envelope spring - Holds envelopes in position for picking

C4557-20024 Spring - Shifter spring - Provides tension on the pivot

C4557-20028 Spring - EOR tension spring - Maintains tension on wear strip

C5870-20002 Spring - Paper stacker (kicker) spring

C6409-00017 Spring - Wing torsion spring - Provides pressure on the wing during paper output

C6455-00011 Spring - Spring, Length Adjust

C6410A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6410-40006 Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray

C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

C5870-00004 Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion

C6409-00008 Support - Upper paper guide support - Base for upper paper guide

C6410A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C4557-60049 Tray - Paper input tray pressure plate

C5870-40028 Tray - Paper input tray base - Does not include the pressure plate assembly

C5870-60081 Tray Assembly - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly

C6410-60005 Tray Assembly - Paper input tray assembly (complete) - Entire assembly - Purple

C6410A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C6411-60004 Tray Assembly - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever

C6410A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C6410A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring

C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure

C4557-80002 Washer - Felt washer - Used to lubricate the carriage rod

C6410A-Window Window - Top/front access door assembly - print cartridge access door window.

C4557-40024 Wing - Left wing - Holds printed paper after being ejected

C4557-40025 Wing - Right wing - Holds printed paper after being ejected

C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers

HP DeskJet 895Cxi (C6410A)

HP parts list for C6410A HP DeskJet 895Cxi Printer