HP parts list for C6680A officejet r40 all-in-one

C5870-80007 Absorber - Spittoon sponge - Absorbs excess ink from cartridges

C6680A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C6680A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C6680A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

C6680A-ADF_Arm ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

C6680A-ADF_Feed_Assy ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

C6680A-ADF_Input_Tray Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

C6680A-ADF_Motor ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

C6680A-ADF_Output_Tray ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.

C6680A-ADF_Pad ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.

C6680A-ADF_PC_BRD ADF PC Board - Control Board on the ADF unit

C6680A-ADF_Roller_Kit ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.

C6680A-ADF_Scanner ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.

C6680A-ADF_Sensor_BRD ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

C6680A-ADF_Unit_Assy ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.

C6409-40021 Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel

C6680A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C6680A-Arm_Door Arm Door - Carriage access door sensor arm

C6680A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C6680A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C6680A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C6680A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C5870-40051 Assembly - Zassa

C6685-60024 Assembly - Left Wall Assy (Purple Paper Adj)

C6409-00013 Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel

C6680-60059 Base - Scanner base assembly - Includes base and both ribbon cables

C6680A-Battery Battery - Battery pack for hp printer

C4557-40124 Bearing - Bearing Polar

C5870-40031 Bearing - Bearing-Feedroller

C6429-40008 Bearing - Roller bearing for HP DeskJet 6940 Series

C4557-40049 Belt - Carriage drive belt - Moves printhead side to side

C6680-80070 Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass

C6680A-Belt_ADF Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

C6680A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C6680A-Belt_Duplex Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit

C6680A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C6680A-Belt_Scanner Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

C6680-40050 Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel

C6680-60035 Bezel - Control panel bezel - Installed over the control panel - English

C6680-60037 Bezel - Control panel bezel - Installed over the control panel - French

C6680A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C2145-00037 Blade - ESD blade for HP DeskJet 870C Series

C4557-40128 Brace - Left backbone brace - Provides support for backbone

C4557-40130 Brace - Left wall brace - Provides support for left wall

C5870-40020 Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone

C5870-00010 Bracket - Paper motor mounting bracket

C6680A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C6680A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C6680A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

5063-1254 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector

5063-1255 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.

C2946A Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.

C2947A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long

C4557-60022 Cable - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long

C4557-80075 Cable - Carriage assembly flex cable - 40.3cm (15.9in) long

C5870-60140 Cable - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long

C6680-60002 Cable - Scanner motor cable

C6680-60057 Cable - Ribbon cable - Has 10-pin (M) connectors - 71.8cm (28.3in) long

C6680-80002 Cable - Ribbon cable - Has 26-pin (M) edge connectors - 15.5cm (6.1in) long

C6680-80010 Cable - Cable assembly - 16-pin (F) connector to 34.9cm (13.8in) cable with 3-pin (F) connector, 56.6cmn (22.3in) cable with 3-pin (F) connector, 59.4cm (23.4in) cable with 7-pin (F) connector, and 61cm (24in) cable with 5-pin (F) connector

C6680-80050 Cable - Scanner module trailing cable - Has 20-pin (M) edge connectors - 42.9cm (16.9in) long

C6680A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C6680A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C6680A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C6680A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C6680A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C4557-40034 Cam - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position

C6409-40040 Cam - Pick cam - Controls pressure plate and lever

C6680A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C6680A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

C6409-40031 Carriage - Ink cartridge carriage

C6409-60003 Carriage - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel

C8173-67201 Carriage - Ink cartridge carriage hp deskjet 1180 1280 9300 1220 1125

C6680A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C6680A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C6680A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C6680A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C6680A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C6680A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C6680A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C6680A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C6680A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

C5870-00006 Channel - Width adjust channel

C6680-40020 Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly

C6680A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

C4557-00043 Clip - Paperclip - Holds upper paper guide pinch rollers in place

C5870-00002 Clip - Service station ESD grounding clip

C6683-00020 Clip - Clip-Retainer Cable

C6680A-Clutch_ADF Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder

C6680A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

C6680-60029 Control Panel - New# C6680-60082 CONTROL PANEL

C6680-60082 Control Panel - Control panel (Keypad) assembly - Does NOT include cable

C6680A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C7281-60005 Control Panel - Control Panel, Psc500

C7281-60011 Control Panel - Control Panel, psc500

C5870-40016 Cover - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly

C6680-40100 Cover - Top cover (Document cover) - Does not include foam pad

C6680-60027 Cover - Top cover (Document cover) assembly - Includes cover, foam pad, and hinge

C6680A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C6680A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C6680A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C6680A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C6680A-Display Display - Status led display (LCD display assembly).

C4557-40026 Door - Output door - Separates output media from input media

C6680-60014 Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch

C6680-60065 Door - Rear paper jam cleanout door assembly

C6680-60070 Door - Rear cleanout door assembly kit - Paper jam cleanout door

C6680A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C6680A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C6680A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C6680A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C6680A-Drive_Assy_ADF Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

C6680A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C4557-60030 Encoder - New#c6409-60200 Utg/Paper Encoder Pca

C4557-80019 Encoder - Paper motor encoder disk

C6680A-Encoder Encoder - Encoder spring - provides tension for encoder strip

C6680A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C6680A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C6680A-Extender_ADF Extender ADF - Paper extension for the automatic document feeder (ADF) input tray

C6680A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C6680A-Extender_Output Extender Output - Paper exit tray extension

C6680A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C6680A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C6680A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

C6680A-Feed_Rollers_ADF Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.

9170-1655 Ferrite Assembly - Ferrite core for HP OfficeJet K60

9170-1821 Ferrite Assembly - Ferrite core - Attaches to the control panel ribbon cable

C6680-80042 Ferrite Assembly - Ferrite core - Attaches to the scanner ribbon cable

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C3835S Film - HP Premium Trans Film 250 Sht Value Pack

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

C5870-40024 Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide

C6680-40001 Flag - A4 flag - Media sensor - Mounts on the top left edge of the upper paper guide

C6680A-Flag_ADF Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly

C6680A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C6680-60028 Foam - New# C6680-60027 Foam Pad Assy

C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)

C6680A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C5870-40039 Frame - Wing frame - Chassis for in/out tray components

C6680A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C4557-40007 Gear - Pick gear for HP Color Copier 170

C4557-40021 Gear - Feed roller idler gear

C4557-40079 Gear - Transfer gear (double gear)

C4557-40095 Gear - Encoder gear for HP Color Copier 260

C4557-40102 Gear - Feed roller cluster gear

C5870-40017 Gear - Cluster gear (large gear)

C6680A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C6680A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C6680A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C6680A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C6680A-Gear_Station Gear Station - Gears on shaft of spittoon station

C6680A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C6680-60020 Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel

C6680A-Glass_Assy Glass Assembly - Main top copier glass assembly.

C4557-40013 Guide - Rear paper guide - Guides media through rear of printer

C4557-40020 Guide - Lower guide - Platform for seperator peg, spring and pad

C4557-40121 Guide - Encoder disk guide

C5870-40037 Guide - Length adjuster - Media input length adjuster

C6409-40022 Guide - Upper paper guide - Guides media through paper path

C6409-40034 Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment

C6410-40005 Guide - Width adjust (Purple) - Holds media against right wall of input tray

C6680A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C6680-40101 Hinge - Hinge - For the top cover (Document lid) on the scanner

C6680A-Hinge_Cvr Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.

C6681-40002 Hinge - New# C6682-60014 Hinge Lower

C6680A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C6680-60026 Idler - Scanner belt idler assembly - Maintains scanner belt tension

C6680A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C6680A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C6680A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series

C6680-60071 Kit - Control panel (Keypad) assembly kit - Does NOT include cable

C4557-40042 Latch - Plastic latch (Y-shaped)

C4557-60045 Latch - Cartridge latch (Black) - Holds black ink cartridge in place

C4557-60046 Latch - Cartridge latch (Color) - Holds color ink cartridge in place

C6426-40146 Latch - Cartridge latch (Black) - Holds black ink cartridge in place

C6680-40053 Latch - Latch (Wavy slot)

C4557-00037 Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker

C5870-40022 Lever - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment

C6411-40006 Lever - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper

C6680A-Lid_Cover_Assy Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.

C4557-40063 Lifter - Separator lifter - Used to lift the separator peg

C6681-60020 Lifter - ADF assembly - Includes cover and ADF mechanism (Europe)

C4557-40084 Link - Pivot link for HP Color Copier 270

C4557-40085 Link - Link pin for HP Color Copier 160

C6429-60025 Link - Kicker bar cam link (spring loaded)

6040-0788 Lubricant - Silicon Grease in a Syringe

C6680-60021 Module - Scn Module Assy

C6688-60003 Module - Scanner module assembly - Moves along scanner slider rod to scan documents

C4557-60003 Motor - Carriage motor assembly (Includes pulley)

C5870-60004 Motor - Service station motor assembly - Includes PC board and gear

C6409-60004 Motor - Paper advance motor

C6680-60023 Motor - Motor and gear assembly - Drives scanner module - Does not include motor cable

C6680A-Motor_ADF Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly

C6680A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C6680A-Motor_Scanner Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

C6680A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C6680-60051 NamePlate - Nameplate - OfficeJet R40 logo

C6680-60068 NamePlate - Nameplate - OfficeJet R40 series logo

C6682-60024 NamePlate - New# C6683-60025/Nameplate R60

C6683-60025 NamePlate - Nameplate - OfficeJet R60 logo

C6680A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

C4557-80027 Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster

C6680A-Pad_ADF Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

C6680A-Pad_Tray Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

C4557-60086 Pallet - New# C6426-60054 Pallet/Link

C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts

0624-0796 Pan - Screw-Tpg 8.5-In-Lg Pan-Hd-Torx T20 Stl

C4557-40098 Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel

C4557-40099 Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel

C4557-40116 Panel - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame

C5870-40019 Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame

C6680-40021 Panel - Left side panel - Covers the left side of the print mechanism

C6680-40022 Panel - Right side panel - Covers the right side of the print mechanism

C6680-40026 Panel - Rear panel - Covers the back of the printer and the ground plane assembly

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets

C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets

C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package

C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets

C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets

C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets

C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6044A Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes

C6045A Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes

C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes

C6831A Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets

C6944A Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets

C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets

C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

C7013A Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package

C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

C7020A Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets

Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series

Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C4557-40016 Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked

C4557-60062 PC Board - Banner PCA and cable assembly

C6409-60002 PC Board - Ink cartridge carriage PC board

C6409-60200 PC Board - Paper encoder PCA - Controls operation of paper motor

C6409-60237 PC Board - Ink cartridge carriage PC board

C6680-60151 PC Board - Pca, Inter Connect

C6680-60154 PC Board - NEW# c6680-60197 MAIN PCA

C6680-60196 PC Board - Wizard Main Pca

C6680-60197 PC Board - Main logic PC board

C6680-60202 PC Board - Interconnect PC board

C6680A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C7281-68001 PC Board - Main logic PC board

C6680A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

0515-2901 Pin - Scr-Tapping Assy

C4557-20025 Pin - Pin-X3 Datum

C5870-40029 Pin - Separator peg for HP DeskJet 895C

C6680A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C6409-40028 Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt

C6409-60038 Plate - Shift Plate Assy

C6429-60016 Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two

C6455-60057 Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly

C6680-40140 Plate - Gr Plate

C6681-60033 Plate - New# C6682-60033/Ay, Lift Plate

8120-6260 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)

8120-6261 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-6262 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)

8120-8878 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)

8120-8879 Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)

8120-8880 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)

8120-8881 Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)

8120-8882 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-8883 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)

8120-8884 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)

8120-8885 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)

8120-8886 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)

8121-0564 Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)

8121-1003 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)

C6680A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

0950-3807 Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector

C6680-60079 Power Module - Power module kit with AC power cord

C6680A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C6680A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

C6680A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C6680A-Power_Supply_BRD Power Supply Board - High voltage power supply board

C6680A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

C6680A-Pulley Pulley - Paper pick up tray motor pulley.

C6680A-Pulley_ADF Pulley ADF - ADF feeder motor pulley

5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

C6680A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C4557-00024 Retainer - Ferrite retainer - Holds head drive flex cable ferrite

C4557-20026 Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage

C6409-20004 Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel

C6680-20070 Rod - Scanner slider rod - Scanner module moves along this rod

C6680A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C6680A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide

C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide

C4557-60025 Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder

C5870-40030 Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel

C5870-60092 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA

C6409-60037 Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel

C6426-60049 Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings

C6680A-Roller_ADF Roller ADF - Feeder ADF roller for picking up paper from ADF unit.

C6680A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C6680A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

C6680A-Scanner Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6680A-Scanner_Assy Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6680A-Scanner_Belt Scanner Belt - Scanner belt attaches from the scanner to the scanner motor.

C6680A-Scanner_Cable Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

C6680A-Scanner_Motor Scanner Motor - Scanner driving motor

C6680A-Scanner_Unit Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.

0515-2199 Screw - Screw T8 4-20x6mm,Plas

0515-2200 Screw - Screw Tptt-AP MOQ=Mult

0515-2552 Screw - Screw,Plastic M4

0515-2841 Screw - Screw plstc m3x9mm

0515-2873 Screw - Screw-Sidecase

0515-2902 Screw - Screw-Tapping

0515-3002 Screw - Mech-Screw 2.5x0.45x6

C6680A-Sensor_ADF Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

C6680A-Sensor_Exit Sensor Exit - Exit media sensor sv

C6680A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C6680A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C6680A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C4557-60011 Separator - Separator pad for HP DeskJet 700 Series

C6680A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C6680A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C6680-10020 Service Manual - Service manual on CD-ROM for printer/scanner/copier 500 series, color copier 160/170/260/270 and OfficeJet R series

0515-2849 Service Parts - Scr-M3x14 Taptite

0515-2850 Service Parts - Scr-m2.5x5.5-tap

0515-2878 Service Parts - Scr m3-05x5mm

0515-2898 Service Parts - Scr-M3x5

C4557-40006 Service Parts - New# C5870-40031

C6409-60119 Service Parts - Order: C6429-60025

C6409-60135 Service Parts - Order C6409-60236

C6680-00020 Service Parts - Label - Serial

C6680-60060 Service Parts - Color Copy Target Rev B

C6681-00001 Service Parts - Order: C6680-00020

C6688A-UK3 Service Parts - Color Copier 170

C6680A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

C4557-20027 Shaft - Cartridge latch shaft near top of carriage

C4557-40066 Shaft - Drive shaft with molded gears on each end

C4557-60002 Shaft - New Part#c6426-60049/Utg Pick Shaft Assy

C4557-00038 Shield - Paper motor ESD shield

C6680-00041 Shield - Main PC board shield (Upper)

C6680-60058 Shield - Main PC board shield (Lower)

C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)

C6680A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C5870-40036 Slider - Integrated slider for carriage assembly

C6680A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring

C4557-40150 Snap - Pivot snap - Used to hold pivot to pick feed roller shaft

C6680A-Speaker Speaker - Speaker assembly - includes speaker cable.

C5870-40014 Spitton - Spittoon base - The bottom of the service station assembly

C6680A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C2145-00033 Spring - ESD spring - Installed between ESD blade and carriage PC board

C2145-60040 Spring - X Bias Spring Assy

C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller

C4557-00011 Spring - Drawer spring - Holds input drawer in place

C4557-00012 Spring - Right wing spring - Applies pressure to right wing during paper output

C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt

C4557-00018 Spring - Encoder spring - Provides tension for encoder strip

C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges

C4557-00029 Spring - Left wall spring (front) - Holds left wall assembly in position

C4557-00030 Spring - Left wall spring (rear) - Provides pressure against media

C4557-00031 Spring - Paper length adjuster spring - Provides tension for paper input length adjuster

C4557-00033 Spring - Link spring - Provides tension to shaft of pick cam gear

C4557-00035 Spring - Paper pusher spring - Maintains alignment in paper tray

C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller

C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide

C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly

C4557-20020 Spring - Envelope spring - Holds envelopes in position for picking

C4557-20024 Spring - Shifter spring - Provides tension on the pivot

C4557-20028 Spring - EOR tension spring - Maintains tension on wear strip

C5870-20002 Spring - Paper stacker (kicker) spring

C6409-00017 Spring - Wing torsion spring - Provides pressure on the wing during paper output

C6455-00011 Spring - Spring, Length Adjust

C6680-80020 Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges

C6680-80074 Spring - Idler spring - Provides tension for the scanner belt idler assembly

C6680A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6410-40006 Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray

C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

C5870-00004 Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion

C6409-00008 Support - Upper paper guide support - Base for upper paper guide

C6680-40009 Support - Glass assembly support - Retains the scanner glass inside the scanner bezel

C6680A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C4557-60049 Tray - Paper input tray pressure plate

C5870-40028 Tray - Paper input tray base - Does not include the pressure plate assembly

C6680-60078 Tray - Paper input tray assembly kit (Complete - Purple) - Plugs into front paper output tray assembly - Entire assembly

C6682-60014 Tray - Automatic document feeder (ADF) output tray

C5870-60081 Tray Assembly - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly

C6410-60005 Tray Assembly - Paper input tray assembly (complete) - Entire assembly - Purple

C6411-60004 Tray Assembly - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever

C6680A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C6680A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C6680A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring

C6690-69003 Unit - Cc 1xx Exchange Unit

C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure

C4557-80002 Washer - Felt washer - Used to lubricate the carriage rod

C6680A-Window Window - Top/front access door assembly - print cartridge access door window.

C4557-40024 Wing - Left wing - Holds printed paper after being ejected

C4557-40025 Wing - Right wing - Holds printed paper after being ejected

C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers

HP officejet r40 all-in-one printer (C6680A)

HP parts list for C6680A HP officejet r40 all-in-one printer