C5870-80007Absorber - Spittoon sponge - Absorbs excess ink from cartridges
C6685A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6685A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6685A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C6685A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C6685A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C6685A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C6685A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C6685A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C6685A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C6685A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C6685A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C6685A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C6685A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C6409-40021Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel
C4602-40039Arm - Clutch actuator arm - Used to engage the pivot gears
C5364-69006Arm - Carriage motor - Provides power for carriage belt
C6685A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6685-60024Assembly - Left Wall Assy (Purple Paper Adj)
C6409-00013Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
C6680-60059Base - Scanner base assembly - Includes base and both ribbon cables
C6429-40008Bearing - Roller bearing for HP DeskJet 6940 Series
C4557-40049Belt - Carriage drive belt - Moves printhead side to side
C6680-80070Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass
C6685A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C6685A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C6685A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C6685A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C6680-40050Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel
C6685-60001Bezel - Bezel for Color Copier 170, Color Copier 270, Color Copier 160, Color Copier 260
C6685A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2145-00037Blade - ESD blade for HP DeskJet 870C Series
C4557-40128Brace - Left backbone brace - Provides support for backbone
C4557-40130Brace - Left wall brace - Provides support for left wall
C5870-40020Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone
C6685A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6685A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6685A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6685A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6685A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C6685A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6685A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6685A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6685A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C6685-60020Cover - Top cover (Document cover) assembly - Includes cover, foam pad, and hinge
C6685A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6685A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6685A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6685A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6685A-DisplayDisplay - Status led display (LCD display assembly).
C4557-40026Door - Output door - Separates output media from input media
C6680-60014Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch
C6680-60065Door - Rear paper jam cleanout door assembly
C6680-60070Door - Rear cleanout door assembly kit - Paper jam cleanout door
C6685A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C6685A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C6685A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C6685A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C6685A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C6685A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C6685A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C6685A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C6685A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
C6685A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C6685A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C6685A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
9170-1655Ferrite Assembly - Ferrite core for HP OfficeJet K60
9170-1821Ferrite Assembly - Ferrite core - Attaches to the control panel ribbon cable
C6680-80042Ferrite Assembly - Ferrite core - Attaches to the scanner ribbon cable
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C5870-40024Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide
C6680-40001Flag - A4 flag - Media sensor - Mounts on the top left edge of the upper paper guide
C6685A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C6685A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C6685A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C6685A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C6685A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C5870-40037Guide - Length adjuster - Media input length adjuster
C6409-40022Guide - Upper paper guide - Guides media through paper path
C6409-40034Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment
C6410-40005Guide - Width adjust (Purple) - Holds media against right wall of input tray
C6685A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C6680-40101Hinge - Hinge - For the top cover (Document lid) on the scanner
C6680-60023Motor - Motor and gear assembly - Drives scanner module - Does not include motor cable
C6685A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
C6685A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C6685A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C6685A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C6683-60025NamePlate - Nameplate - OfficeJet R60 logo
C6685-60017NamePlate - Nameplate/Logo for Color Copier 170, Color Copier 270, Color Copier 160, Color Copier 260
C6685-60023NamePlate - Nameplate - Color Copier 170 logo with paperclip holder
6040-0990Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil)
C6685A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C4557-80027Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster
C6685A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C6685A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
C6426-60054Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts
C4557-40098Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel
C4557-40099Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel
C4557-40116Panel - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame
C5870-40019Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame
C6680-40021Panel - Left side panel - Covers the left side of the print mechanism
C6680-40022Panel - Right side panel - Covers the right side of the print mechanism
C6680-40026Panel - Rear panel - Covers the back of the printer and the ground plane assembly
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634ZPaper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812APaper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820APaper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824APaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853APaper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C5976APaper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976BPaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C5977APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets
C5977BPaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets
C6039APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6044APaper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes
C6045APaper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes
C6817APaper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6955APaper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
Q7852APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C4557-40016Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked
C4557-60062PC Board - Banner PCA and cable assembly
C6409-60002PC Board - Ink cartridge carriage PC board
C6409-60200PC Board - Paper encoder PCA - Controls operation of paper motor
C6409-60237PC Board - Ink cartridge carriage PC board
C6685A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C6685A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
8120-6260Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)
8120-6261Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-6262Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)
8120-8878Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)
8120-8879Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)
8120-8880Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)
8120-8881Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)
8120-8882Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-8883Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)
8120-8884Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)
8120-8885Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)
8120-8886Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)
8121-0564Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)
8121-1003Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)
C6685A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0950-2880Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector
0950-3807Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector
C6680-60079Power Module - Power module kit with AC power cord
C6685A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C6685A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C6685A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C6685A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C6685A-PulleyPulley - Paper pick up tray motor pulley.
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6685A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4557-20026Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage
C6409-20004Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel
C6680-20070Rod - Scanner slider rod - Scanner module moves along this rod
C6685A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C6685A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C4557-20002Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C5870-40030Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
C5870-60092Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA
C6409-60037Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
C6426-60049Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6685A-Roller_ADFRoller ADF - Feeder ADF roller for picking up paper from ADF unit.
C6685A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6685A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6685A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C6685A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C6685A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C6685A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6685A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011Separator - Separator pad for HP DeskJet 700 Series
C6685A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6685A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6680-10020Service Manual - Service manual on CD-ROM for printer/scanner/copier 500 series, color copier 160/170/260/270 and OfficeJet R series
C4557-60013Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)
C6685A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C5870-40036Slider - Integrated slider for carriage assembly
C6685A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C4557-40069Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring
C4557-40150Snap - Pivot snap - Used to hold pivot to pick feed roller shaft
C6685A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C5870-40014Spitton - Spittoon base - The bottom of the service station assembly
C6685A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2145-00033Spring - ESD spring - Installed between ESD blade and carriage PC board
C6411-60004Tray Assembly - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever
C6685A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C6685A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C6685A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
C4557-60109Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring
Repair It
Exchange It
View Supplies
Service Manual
