HP parts list for C6734A officejet g series

C6426-80019 Absorber - Sponge - Absorbs excess ink and debris from cleaning print cartridges

C6734A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C6734A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C6734A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

C6740-60030 ADF - Adf G95 Chinese/Taiwanese

C6734A-ADF_Arm ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

C6734A-ADF_Feed_Assy ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

C6734A-ADF_Input_Tray Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

C6734A-ADF_Motor ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

C6734A-ADF_Output_Tray ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.

C6734A-ADF_Pad ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.

C6734A-ADF_PC_BRD ADF PC Board - Control Board on the ADF unit

C6734A-ADF_Roller_Kit ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.

C6734A-ADF_Scanner ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.

C6734A-ADF_Sensor_BRD ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

C6734A-ADF_Unit_Assy ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.

C6426-40070 Adjuster - Width adjuster assembly - Used to set the paper input tray to the width of the paper being used

C6426-60023 Adjuster - Paper tray width/length adjuster - Holds media against right wall of input tray or against the rollers

C6736-69012 All-In-One InkJet - OfficeJet G55/55XI whole unit replacement (with scanner document lid) - Does NOT include power module, power cord, or interface cable

C6734A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C6734A-Arm_Door Arm Door - Carriage access door sensor arm

C6734A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C6734A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C6734A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C6734A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C6426-40099 Bar - Kicker Bar - Restacks Paper in Paper Input Tray Stack After

C6429-40031 Bar - Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray

C6455-40050 Base - Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower

C6734-60014 Base - Scan Base Assembly

C6734A-Battery Battery - Battery pack for hp printer

C6426-40018 Beam - Belt attachment beam (I-shaped) - Used to secure the belt attachment tower to the carriage assembly

C4557-40124 Bearing - Bearing Polar

C6426-40115 Belt - Carriage belt - Moves the carriage assembly across the carriage rod

C6429-40001 Belt - Paper drive belt

C6680-80070 Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass

C6734A-Belt_ADF Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

C6734A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C6734A-Belt_Duplex Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit

C6734A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C6734A-Belt_Scanner Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

C6680-40050 Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel

C6734A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C6736-60001 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (English)

C6736-60002 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (French)

C6736-60003 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (German)

C6736-60004 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Italian)

C6736-60005 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Dutch)

C6736-60006 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Danish)

C6736-60007 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Spanish)

C6736-60008 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Finnish)

C6736-60009 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Norwegian)

C6736-60010 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Swedish)

C6736-60011 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Polish)

C6736-60012 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Korea)

C6736-60013 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Cantonese)

C6738-60001 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (English)

C6738-60002 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (French)

C6738-60003 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (German)

C6738-60004 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Italian)

C6738-60005 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Dutch)

C6738-60006 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Danish)

C6738-60007 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Spanish)

C6738-60008 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Finnish)

C6738-60009 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Norwegian)

C6738-60010 Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Swedish)

C6734-40013 Blank - Keypad Blank-Control Panel

C6426-40108 Block - Block-Lift

C6734-00002 Box - Cover-E-Box

C6429-00014 Bracket - Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item

C6734A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C6734A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C6734A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

C6426-60033 Button - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)

C8955A Button - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing.

5063-1254 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector

5063-1255 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.

8120-8668 Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long Miniconnector

8121-0868 Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long

8121-1037 Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long

C2946A Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.

C2947A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long

C6426-60059 Cable - Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long

C6429-80084 Cable - Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long

C6518A Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long

C6680-80003 Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector

C6734-60008 Cable - Cable harness assembly - Has many connectors: an 18-pin (F), two 3-pin (F), a 4-pin (F), and two 5-pin (F) - Overall length is 72.9cm (28.7in)

C6734-80010 Cable - Flex Cable - Interconnect Boar

C6734A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C6734A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C6734A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C6734A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C6734A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C6426-40064 Cam - Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position

C6734A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C6734A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

C6429-60162 Carriage - Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider

C6734A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C6734A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C6734A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C6734A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C6734A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C6734A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C6734A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C6734A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C6734A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

C6680-40020 Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly

C6734A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

C6734A-Clutch_ADF Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder

C6734A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

1253-3448 Connector - Cover, Fax Connector

C6734-60013 Control Panel - Control Panel Cable Assembly

C6734A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C6735-60011 Control Panel - Control panel assembly with buttons (Does NOT include bezel)

C6426-40014 Cover - Top Cover (Bonnet) - Mounts on Top of the Spittoon in the

C6426-40086 Cover - Cover - For rear paper cleanout door assembly

C6429-60181 Cover - Assy-Cover-Business Tray

C6431-60139 Cover - Top cover (Bonnet)

C6734-40024 Cover - Paper tray frame left side cover - Provides structural rigidity to the paper tray frame assembly

C6734-40025 Cover - Paper tray frame right side cover - Provides structural rigidity to the paper tray frame assembly

C6736-60018 Cover - Top cover (document lid) - Attaches to the top of the scanner assembly - Includes cover, foam pad and hinge

C6734A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C6734A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C6734A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C6426-40012 Cradle - Cradle

C6734A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C6734A-Display Display - Status led display (LCD display assembly).

C6426-60038 Door - Rear cleanout door assembly - Paper jam cleanout door

C6680-60014 Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch

C6734A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C6734A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C6734A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C6734A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C6734A-Drive_Assy_ADF Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

C6426-40031 Duplexer - Hyde Duplexer

C6463A Duplexer - Duplexer Module - REPLACEMENT DUPLEXER MODULE ASSEMBLY - INSTALLS IN REAR OF PRINTER (IN PLACE OF THE REAR CLEAN OUT DOOR ASSEMBLY)

C6487-60050 Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)

C6734A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C4557-80019 Encoder - Paper motor encoder disk

C6734A-Encoder Encoder - Encoder spring - provides tension for encoder strip

C6734A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C6734A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C6734A-001 Engine - Officejet-Engine Generic (Base

C6734A-Extender_ADF Extender ADF - Paper extension for the automatic document feeder (ADF) input tray

C6734A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C6734A-Extender_Output Extender Output - Paper exit tray extension

C6429-40063 Extension - Tray cover extension - Pulls out of the paper output tray/cover to hold longer media

C6734A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C6734A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C6734A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

C6734A-Feed_Rollers_ADF Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C3836A Film - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets

C3836AC Film - Film (Glossy) for DeskJet D23XX Series, DeskJet D41XX Series, DeskJet 1200 Series, DeskJet 1220 Series

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

Q1973A Film - Film (Glossy) for DeskJet 3600 series, DesignJet 100 Series, DeskJet 450 Series, OfficeJet T65 Series

C6426-40052 Flag - OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide

C6426-40089 Flag - DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag

C6734A-Flag_ADF Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly

C6734A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C6680-60028 Foam - New# C6680-60027 Foam Pad Assy

C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)

C6734A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C6426-40061 Frame - Frame-I/O;NOT AVAIL FOR REPLMNT

C6734A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C4557-40021 Gear - Feed roller idler gear

C4557-40079 Gear - Transfer gear (double gear)

C5870-40017 Gear - Cluster gear (large gear)

C6426-40103 Gear - Kicker bar cam gear - Gear with cam lobe and offset pin

C6429-40005 Gear - Cluster gear for HP OfficeJet K60

C6734A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C6734A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C6734A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C6734A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C6734A-Gear_Station Gear Station - Gears on shaft of spittoon station

C6734A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C6680-60020 Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel

C6734A-Glass_Assy Glass Assembly - Main top copier glass assembly.

C6734-60015 Ground - Ground Plane Ay

C6455-40059 Guard - Guard- Gear

C4557-40121 Guide - Encoder disk guide

C6426-40021 Guide - Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken

C6426-40025 Guide - Guide-Inner Paper

C6426-40098 Guide - Lower paper guide housing (Does NOT include any attaching parts)

C6429-60141 Guide - Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide

C6734A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C6426-40067 Handle - Paper input tray left handle

C6426-40068 Handle - Paper input tray right handle

C6680-40101 Hinge - Hinge - For the top cover (Document lid) on the scanner

C6734A-Hinge_Cvr Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.

C6734A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C6680-60026 Idler - Scanner belt idler assembly - Maintains scanner belt tension

C6734A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C6734A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C6734A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series

C6050A Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series

C6426-40016 Key - Unknown Keyword for DeskJet 6620 Series

C6426-60029 Key - Unknown Keyword for DeskJet 6620 Series

C6426-80006 Key - Unknown Keyword for DeskJet 6620 Series

C6429-60145 Key - Unknown Keyword for DeskJet 6620 Series

C6429-60182 Key - Unknown Keyword for DeskJet 6620 Series

C6734-40033 Key - Unknown Keyword for DeskJet 6620 Series

C6740-60046 Key - Unknown Keyword for DeskJet 6620 Series

C6747-40029 Key - Unknown Keyword for DeskJet 6620 Series

C6426-40118 Kicker - Kicker bar - Restacks paper in paper input tray stack after the top sheet is picked

C6428-40001 Knob - Latch knob - Mounts on the rear paper cleanout door assembly

C4557-40042 Latch - Plastic latch (Y-shaped)

C6680-40053 Latch - Latch (Wavy slot)

C6734A-Lid_Cover_Assy Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.

C6426-40100 Lifter - Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function

C6429-60025 Link - Kicker bar cam link (spring loaded)

C6429-40010 Lock - Lock-I/O Frame

C6736-90144 Manual - Manual for OfficeJet G55 Series, OfficeJet G85 Series, OfficeJet G95 Series

C6736-90147 Manual - Manual for OfficeJet G55 Series, OfficeJet G85 Series, OfficeJet G95 Series

C6734-60002 Module - Ay-Scan Module

J3258-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

C4557-60003 Motor - Carriage motor assembly (Includes pulley)

C5870-60004 Motor - Service station motor assembly - Includes PC board and gear

C6429-60004 Motor - Paper drive motor assembly - Includes pulley

C6734-60022 Motor - Scanner motor and drive gear assembly - Provides the drive to move the scanner module

C6734A-Motor_ADF Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly

C6734A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C6734A-Motor_Scanner Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

C6734A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C6734A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

C6409-80003 Pad - Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod

C6734A-Pad_ADF Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

C6734A-Pad_Tray Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts

0624-0796 Pan - Screw-Tpg 8.5-In-Lg Pan-Hd-Torx T20 Stl

C6734-40019 Panel - Rear panel (U-shaped) - Covers the rear of the printer and the ground plane assembly

C6734-40020 Panel - Left side panel - Covers the left side of the print mechanism

C6734-40021 Panel - Right side panel - Covers the right side of the print mechanism

C6734-40022 Panel - Corner panel - Covers the right rear corner

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1821A Paper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets

C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets

C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package

C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets

C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets

C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets

C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6042A Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer

C6044A Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes

C6045A Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes

C6765A Paper - Paper (Glossy) for PSC 1500 Series, PSC 1500 Series All-In-One, PhotoSmart D71XX Series, PhotoSmart D73XX Series

C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

C6818A Paper - Paper (Glossy) for OfficeJet 5615 Series, OfficeJet 5605 Series, OfficeJet 6310 All-in-One, OfficeJet 6301 Series

C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes

C6829A Paper - Paper (Textured) for PSC 2100 Series All in One, OfficeJet V40 Series, DeskJet 1280 Series, Color InkJet cp1700 Series

C6831A Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets

C6832A Paper - Paper (Glossy) for DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series, DeskJet F4140 Series, DeskJet F4135 All-In-One

C6944A Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets

C6945A Paper - Premium Plus glossy InkJet photographic paper - 10.0cm (3.9in) x 15.0cm (5.9in) - 20 sheets per package

C6951A Paper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series

C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets

C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

C7013A Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package

C7014A Paper - Paper (Photo) for DeskJet 656 Series, DeskJet 3400 Series, DeskJet 3325 Series, DeskJet 3800 Series

C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

C7020A Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets

C7040A Paper - Paper (Glossy) for Business Inkjet 2280 Series, Business InkJet 1100 Series, Business Inkjet 2300 Series, DeskJet 9600 Series

C7897A Paper - Paper (Glossy) for DeskJet F4140 Series, DeskJet F4135 All-In-One, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series

C7898A Paper - Paper (Glossy) for DeskJet D13XX Series, DeskJet D1311 Series, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series

CR667A Paper - HP Premium Plus Soft-gloss Photo Paper-50 Letter/8.5 x 11 in

Q1785A Paper - Paper (Glossy) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, DeskJet 640 Series

Q1786A Paper - Paper (Glossy) for DeskJet 450 Series, OfficeJet V40 Series, PSC 700 Series All in One, PSC 900 Series All-in-One

Q1934A Paper - Paper (Matte) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, OfficeJet G55 Series

Q1987A Paper - Paper (Glossy) for OfficeJet G85 Series, OfficeJet K60, OfficeJet K80 Series, PSC 500 Series

Q1993A Paper - Paper (Matte) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, Color InkJet cp1160 Series

Q1994A Paper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series

Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series

Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6426-60058 PC Board - Interconnect PC board - Small square PC board with 4 contact pads for the duplexer module

C6429-60319 PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only

C6429-69319 PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only

C6455-60079 PC Board - Paper drive assembly encoder PC board

C6734-60151 PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.

C6734-60152 PC Board - Interconnect PC board (L-SHAPED) - Interconnects the scanner assembly to the main logic board - Also has the paper and door sensors

C6734-68001 PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.

C6734A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C6737-69015 PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.

C8154-60073 PC Board - Interconnect PC board - Small square PC board with four contact pads for the duplexer module

C6734A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3263G PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

J4102B PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4135A PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers

J4155A PC Board Interface - External JetDirect 70X home print server - Uses telephone wiring to establish a local area network for remote printer operation - For Microsoft Windows 95/98/NT 4.0 - Uses 1Mbps HomePNA version 1.0 signals

J6035A PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port

J6038A PC Board Interface - HP JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector

J6061A PC Board Interface - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable

J6062A PC Board Interface - JetDirect WP110 IEEE 802.11b (Wi-Fi) wireless print server - Connects to printer using parallel printer port

C6426-40102 Peg - Separator Peg - Pushes up the separator pad during the paper pick operation

C4557-20025 Pin - Pin-X3 Datum

C6734A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C6426-60020 Plate - Pressure plate - Mounts in the rear of the paper input tray - Used to push the paper stack into the feed roller

C6429-60016 Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two

C6455-60057 Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly

C3801-40098 Plug - Plug-RJ11

8120-6260 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)

8120-6261 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-6262 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)

8120-8878 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)

8120-8879 Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)

8120-8880 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)

8120-8881 Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)

8120-8882 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-8883 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)

8120-8884 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)

8120-8885 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)

8120-8886 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)

8121-0564 Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)

8121-1003 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)

C6734A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

0950-2880 Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector

0950-3807 Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector

C6734A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C6734A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

C6734A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C6734A-Power_Supply_BRD Power Supply Board - High voltage power supply board

C6734A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

J3263A Print Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN

J3265A Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

C6734A-Pulley Pulley - Paper pick up tray motor pulley.

C6734A-Pulley_ADF Pulley ADF - ADF feeder motor pulley

5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

C6737-00027 Regulator - Regulatory Label South Africa

C6734A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C6426-00006 Retainer - Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly

C6409-20003 Rod - Carriage rod - Slider/guide rod for the pen carriage assembly

C6680-20070 Rod - Scanner slider rod - Scanner module moves along this rod

C6734A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C6734A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide

C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide

C6429-60144 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism

C6455-60056 Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges

C6734A-Roller_ADF Roller ADF - Feeder ADF roller for picking up paper from ADF unit.

C6734A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C6734A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

C6734-60073 Scanner - Scanner module assembly - Moves under the scanner glass to scan the document

C6734A-Scanner Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6734A-Scanner_Assy Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6734A-Scanner_Belt Scanner Belt - Scanner belt attaches from the scanner to the scanner motor.

C6734-80012 Scanner Cable - Scanner Cable

C6734A-Scanner_Cable Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

C6734A-Scanner_Motor Scanner Motor - Scanner driving motor

C6734A-Scanner_Unit Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.

0515-2199 Screw - Screw T8 4-20x6mm,Plas

0515-2200 Screw - Screw Tptt-AP MOQ=Mult

0515-2841 Screw - Screw plstc m3x9mm

0515-2873 Screw - Screw-Sidecase

0515-3002 Screw - Mech-Screw 2.5x0.45x6

0624-0794 Screw - Screw, 6-32 Tt

C6734-20001 Screw - Screw #8-15x1/2 T-20

C6426-60013 Sensor - Spot sensor assembly

C6734A-Sensor_ADF Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

C6734A-Sensor_Exit Sensor Exit - Exit media sensor sv

C6734A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C6734A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C6734A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C4557-60011 Separator - Separator pad for HP DeskJet 700 Series

C6734A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C6734A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C6734-60068 Service Manual - OfficeJet G Series Service CD

0515-2597 Service Parts - Scr-shldr m3x0.5 6.5

0515-2599 Service Parts - Scr-mach, m3x0.5 5.7

0515-2850 Service Parts - Scr-m2.5x5.5-tap

C6426-40095 Service Parts - Tip-Pusher, Bus

C6426-40096 Service Parts - Floor-Output, Bus

C6680-00020 Service Parts - Label - Serial

C6680-10001 Service Parts - B/W Eol Scanner Target

C6680-10003 Service Parts - White Munsell N9.0

C6680-10004 Service Parts - Grey Munsell N8.25

C6680-60060 Service Parts - Color Copy Target Rev B

C6734-60069 Service Parts - G-series service mech

C6735-00012 Service Parts - Telecom Label Turk & Poland

C6735-00017 Service Parts - Telecommunications Label

C6736-60050 Service Parts - Software- Cd - G55

C6736-60060 Service Parts - Cd- G55/Xi Us & Intl

C6736-60063 Service Parts - Cd, G55/G55xi- Us/Europe

C6737-00028 Service Parts - Telecom Label South Africa

C6737-60060 Service Parts - Software- Cd- G85

C6737-60072 Service Parts - Cd- G85/Xi Us & Intl

C6737-60074 Service Parts - Cd- G85/G85xi- Us/Europe

C6740-60052 Service Parts - Cd, G95- Us/Europe

C6734A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

C4557-40066 Shaft - Drive shaft with molded gears on each end

C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)

C4661-60305 Sled - Sled Replmt Kit International

C4661-90296 Sled - Sled Replmt Instructions Inter

C6734A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C6426-40001 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis

C6455-40026 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis

C6734A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring

C6734A-Speaker Speaker - Speaker assembly - includes speaker cable.

C6426-40085 Spitton - Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process

C6734A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C2145-60040 Spring - X Bias Spring Assy

C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller

C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt

C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges

C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller

C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide

C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly

C6426-00017 Spring - Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate

C6426-20008 Spring - Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot

C6426-20012 Spring - Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position

C6680-80020 Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges

C6680-80074 Spring - Idler spring - Provides tension for the scanner belt idler assembly

C6734A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

C6426-00004 Support - Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide

C6680-40009 Support - Glass assembly support - Retains the scanner glass inside the scanner bezel

C6426-40017 Tower - Belt attachment tower - Used to attach the carriage belt to the carriage assembly

C6734A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C6426-40123 Tray - Paper input tray base

C6429-40062 Tray - Paper output business tray cover - Seperates the output media from the input media

C6734-40034 Tray - Tray Cover Extension - Pulls Out of the Paper Output

C6429-60156 Tray Assembly - Paper input business tray/drawer assembly - Includes tray base, pressure plate, width adjust, length adjust, and paper tray handles

C6734A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C6734A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C6734A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring

C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure

C6734A-Window Window - Top/front access door assembly - print cartridge access door window.

C6429-60006 Wingframe - Right wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly

C6429-60007 Wingframe - Left wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly

C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers

HP officejet g series (C6734A)

HP parts list for C6734A HP officejet g series