HP parts list for C6736A HP officejet g55 all-in-one printer
C6426-80019Absorber - Sponge - Absorbs excess ink and debris from cleaning print cartridges
C6736A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6736A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6736A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C6736A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C6736A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C6736A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C6736A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C6736A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C6736A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C6736A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C6736A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C6736A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C6736A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C6426-40070Adjuster - Width adjuster assembly - Used to set the paper input tray to the width of the paper being used
C6426-60023Adjuster - Paper tray width/length adjuster - Holds media against right wall of input tray or against the rollers
C6736-69012All-In-One InkJet - OfficeJet G55/55XI whole unit replacement (with scanner document lid) - Does NOT include power module, power cord, or interface cable
C6736A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6736A-Arm_PickupArm Pick Up - Paper detection arm - for registration plate on picking up paper
C6736A-Arm_PlateArm Plate - Lever arm - used to lift the pressure plate lifter
C6736A-Arm_SensingArm Sensing - Arm assembly senses paper in bottom tray
C6736A-Arm_TensionArm Tension - Tension arm - maintains tension on carriage belt
C6426-40099Bar - Kicker Bar - Restacks Paper in Paper Input Tray Stack After
C6429-40031Bar - Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray
C6455-40050Base - Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower
C6680-80070Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass
C6736A-Belt_ADFBelt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
C6736A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C6736A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C6736A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C6736A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C6680-40050Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel
C6736-60001Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (English)
C6736-60002Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (French)
C6736-60003Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (German)
C6736-60004Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Italian)
C6736-60005Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Dutch)
C6736-60006Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Danish)
C6736-60007Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Spanish)
C6736-60008Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Finnish)
C6736-60009Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Norwegian)
C6736-60010Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Swedish)
C6736-60011Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Polish)
C6736-60012Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Korea)
C6736-60013Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Cantonese)
C6736A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C6738-60001Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (English)
C6738-60002Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (French)
C6738-60003Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (German)
C6738-60004Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Italian)
C6738-60005Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Dutch)
C6738-60006Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Danish)
C6738-60007Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Spanish)
C6738-60008Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Finnish)
C6738-60009Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Norwegian)
C6738-60010Bezel - Control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Swedish)
C6429-00014Bracket - Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item
C6736A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
C6736A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
C6736A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
C6426-60033Button - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)
C8955AButton - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing.
5063-1254Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
5063-1255Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.
8120-8668Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long Miniconnector
8121-1037Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long
C2946ACable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
C2947ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
C6426-60059Cable - Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long
C6429-80084Cable - Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long
C6518ACable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
C6680-80003Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector
C6734-60008Cable - Cable harness assembly - Has many connectors: an 18-pin (F), two 3-pin (F), a 4-pin (F), and two 5-pin (F) - Overall length is 72.9cm (28.7in)
C6736A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C6736A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C6736A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C6736A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C6736A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C6426-40064Cam - Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position
C6736A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C6736A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C6429-60162Carriage - Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider
C6736A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6736A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6736A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6736A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6736A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C6736A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6736A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6736A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6736A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C6680-40020Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly
C6736A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C6736A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C6736A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C6734-40024Cover - Paper tray frame left side cover - Provides structural rigidity to the paper tray frame assembly
C6734-40025Cover - Paper tray frame right side cover - Provides structural rigidity to the paper tray frame assembly
C6736-60018Cover - Top cover (document lid) - Attaches to the top of the scanner assembly - Includes cover, foam pad and hinge
C6736A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6736A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6736A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6736A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6736A-DisplayDisplay - Status led display (LCD display assembly).
C6426-60038Door - Rear cleanout door assembly - Paper jam cleanout door
C6680-60014Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch
C6736A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C6736A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C6736A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C6736A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C6736A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C6463ADuplexer - Duplexer Module - REPLACEMENT DUPLEXER MODULE ASSEMBLY - INSTALLS IN REAR OF PRINTER (IN PLACE OF THE REAR CLEAN OUT DOOR ASSEMBLY)
C6487-60050Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)
C6736A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C6736A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C6736A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C6736A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
C6736A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C6736A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C6736A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C3836AFilm - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3836ACFilm - Film (Glossy) for DeskJet D23XX Series, DeskJet D41XX Series, DeskJet 1200 Series, DeskJet 1220 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
Q1973AFilm - Film (Glossy) for DeskJet 3600 series, DesignJet 100 Series, DeskJet 450 Series, OfficeJet T65 Series
C6426-40052Flag - OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide
C6426-40089Flag - DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag
C6736A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C6426-40103Gear - Kicker bar cam gear - Gear with cam lobe and offset pin
C6429-40005Gear - Cluster gear for HP OfficeJet K60
C6736A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C6736A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C6736A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C6736A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C6426-40021Guide - Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken
C6426-40098Guide - Lower paper guide housing (Does NOT include any attaching parts)
C6429-60141Guide - Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide
C6736A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C6680-40101Hinge - Hinge - For the top cover (Document lid) on the scanner
C6736A-Hinge_CvrHinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
C6736A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C6680-60026Idler - Scanner belt idler assembly - Maintains scanner belt tension
C6736A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
C6736A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C6736A-Lid_Cover_AssyLid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.
C6426-40100Lifter - Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function
C6429-60025Link - Kicker bar cam link (spring loaded)
J3258-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C4557-60003Motor - Carriage motor assembly (Includes pulley)
C5870-60004Motor - Service station motor assembly - Includes PC board and gear
C6429-60004Motor - Paper drive motor assembly - Includes pulley
C6734-60022Motor - Scanner motor and drive gear assembly - Provides the drive to move the scanner module
C6736A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
C6736A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C6736A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C6736A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C6736A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C6409-80003Pad - Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod
C6736A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C6736A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
C6426-60054Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts
C6734-40019Panel - Rear panel (U-shaped) - Covers the rear of the printer and the ground plane assembly
C6734-40020Panel - Left side panel - Covers the left side of the print mechanism
C6734-40021Panel - Right side panel - Covers the right side of the print mechanism
C6734-40022Panel - Corner panel - Covers the right rear corner
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634ZPaper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812APaper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820APaper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1821APaper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824APaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853APaper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C3833APaper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets
C5976APaper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976BPaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C5977APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets
C5977BPaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets
C6039APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6042APaper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer
C6044APaper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes
C6045APaper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes
C6765APaper - Paper (Glossy) for PSC 1500 Series, PSC 1500 Series All-In-One, PhotoSmart D71XX Series, PhotoSmart D73XX Series
C6817APaper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6818APaper - Paper (Glossy) for OfficeJet 5615 Series, OfficeJet 5605 Series, OfficeJet 6310 All-in-One, OfficeJet 6301 Series
C6828APaper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes
C6829APaper - Paper (Textured) for PSC 2100 Series All in One, OfficeJet V40 Series, DeskJet 1280 Series, Color InkJet cp1700 Series
C6831APaper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets
C6832APaper - Paper (Glossy) for DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series, DeskJet F4140 Series, DeskJet F4135 All-In-One
C6944APaper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets
C6945APaper - Premium Plus glossy InkJet photographic paper - 10.0cm (3.9in) x 15.0cm (5.9in) - 20 sheets per package
C6951APaper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series
C6955APaper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
C6979APaper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets
C6983APaper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package
C7006APaper - Paper (InkJet Photo) for DeskJet 6620 Series, PhotoSmart 100 Printer, PSC 900 Series All in One, PSC 900 Series All-in-One
C7007APaper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets
C7013APaper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package
C7014APaper - Paper (Photo) for DeskJet 656 Series, DeskJet 3400 Series, DeskJet 3325 Series, DeskJet 3800 Series
C7018APaper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes
C7019APaper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)
C7020APaper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets
C7040APaper - Paper (Glossy) for Business Inkjet 2280 Series, Business InkJet 1100 Series, Business Inkjet 2300 Series, DeskJet 9600 Series
C7897APaper - Paper (Glossy) for DeskJet F4140 Series, DeskJet F4135 All-In-One, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series
C7898APaper - Paper (Glossy) for DeskJet D13XX Series, DeskJet D1311 Series, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series
CR667APaper - HP Premium Plus Soft-gloss Photo Paper-50 Letter/8.5 x 11 in
Q1785APaper - Paper (Glossy) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, DeskJet 640 Series
Q1786APaper - Paper (Glossy) for DeskJet 450 Series, OfficeJet V40 Series, PSC 700 Series All in One, PSC 900 Series All-in-One
Q1787APaper - Linen Half-fold Greeting Card Paper (Ivory) - A size (8.5 x 11-inches) - 20 cards
Q1788APaper - Linen Half-fold Greeting Card Paper (White) - A size (8.5 x 11-inches) - 20 cards
Q1934APaper - Paper (Matte) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, OfficeJet G55 Series
Q1935APaper - Paper (Glossy) for Photosmart 475 series compact photo printer, PhotoSmart A430 Series, PhotoSmart D71XX Series, PhotoSmart D73XX Series
Q1951APaper - Paper (Glossy) for PhotoSmart D71XX Series, PhotoSmart D73XX Series, HP Photosmart D7300 series, PhotoSmart D5155 Series
Q1969APaper - Paper (Glossy) for DeskJet 660 Series, DeskJet 300, DeskJet 420C, DeskJet 1220 Series
Q1971APaper - Paper (Photo) for DeskJet 660 Series, DeskJet 300, DeskJet 420C, DeskJet 1220 Series
Q1976APaper - Paper (Semi-Glossy) for DeskJet 660 Series, DeskJet 300, DeskJet 420C, DeskJet 1220 Series
Q1977APaper - Paper (Glossy) for Deskjet 460 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800
Q1977ACPaper - Premium Plus Photo Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in), finished size - 10.2cm (4in) x 16.5cm (6.5in), with tab - 20 sheets (Canada)
Q1978APaper - Premium Plus Photo Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in), finished size - 10.2cm (4in) x 16.5cm (6.5in), with tab - 60 sheets
Q1978ACPaper - Premium Plus Photo Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in), finished size - 10.2cm (4in) x 16.5cm (6.5in), with tab - 60 sheets (Canada)
Q1979APaper - Premium Plus Photo Paper (High Gloss) - 10.0cm (3.9in) x 15.0cm (5.9in), finished size - 10.0cm (3.9in) x 16.3cm (6.4in), with tab - 20 sheets
Q1980APaper - Premium Plus Photo Paper (High Gloss) - 10.0cm (3.9in) x 15.0cm (5.9in), finished size - 10.0cm (3.9in) x 16.3cm (6.4in), with tab - 60 sheets
Q1987APaper - Paper (Glossy) for OfficeJet G85 Series, OfficeJet K60, OfficeJet K80 Series, PSC 500 Series
Q1988APaper - Paper (Glossy) for PhotoSmart 420 Series, HP Photosmart 422 Portable Photo Studio, PhotoSmart 475 Series, Photosmart 475 series compact photo printer
Q1989APaper - Paper (Glossy) for PSC 1300 Series All in One, PSC 2300 Series, OfficeJet 6200 Series, OfficeJet 6210
Q1990APaper - Paper (Glossy) for PhotoSmart 325 Series, PhotoSmart 375 Series, OfficeJet 5500 Series All-in-One, OfficeJet 5500 Series All in One
Q1991APaper - Paper (Glossy) for PhotoSmart 230 Series, PhotoSmart 245 Series, PSC 2170 Series All-in-One, PSC 2170 Series All in One
Q1993APaper - Paper (Matte) for DeskJet 1220 Series, DeskJet 1200 Series, DesignJet 1055 Series, Color InkJet cp1160 Series
Q1994APaper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series
Q2506APaper - Premium Plus Photo Paper (Satin Matte) - 10.2cm (4in) x 15.2cm (6in) finished size - 10.2cm (4in) x 16.5cm (6.5in) with tab - 60 sheets
Q2507APaper - Premium Plus Photo Paper (Satin-matte) - 10.0cm (3.9in) x 15.0cm (5.9in) finished size - 10.0cm (3.9in) x 16.3cm (6.4in) with tab - 60 sheets
Q2508APaper - Premium Plus Photo Paper (Satin-Matte) - 10.0cm (3.9in) x 15.0cm (5.9in) finished size - 10.0cm (3.9in) x 16.3cm (6.4in) with tab - 60 sheets
Q2509APaper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series
Q2525APaper - Paper (Glossy) for Business InkJet 3000 Series, Business InkJet 2230 Series, Business Inkjet 2300 Series, DeskJet 9300 Series
Q5431APaper - Paper (Satin) for PhotoSmart A310 Series, PhotoSmart D50XX Series, PhotoSmart A520 Series, HP Photosmart A820 series Compact Photo Printers
Q7852APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
Q8030APaper - Paper (Matte) for DeskJet D13XX Series, DeskJet D1311 Series, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series
C6426-60058PC Board - Interconnect PC board - Small square PC board with 4 contact pads for the duplexer module
C6429-60319PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only
C6429-69319PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only
C6455-60079PC Board - Paper drive assembly encoder PC board
C6734-60151PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.
C6734-60152PC Board - Interconnect PC board (L-SHAPED) - Interconnects the scanner assembly to the main logic board - Also has the paper and door sensors
C6734-68001PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.
C6736A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C6737-69015PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.
C8154-60073PC Board - Interconnect PC board - Small square PC board with four contact pads for the duplexer module
C6736A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
J2591APC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J3258-61041PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258BPC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3263GPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J3264APC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265GPC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101BPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102BPC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4135APC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
J4155APC Board Interface - External JetDirect 70X home print server - Uses telephone wiring to establish a local area network for remote printer operation - For Microsoft Windows 95/98/NT 4.0 - Uses 1Mbps HomePNA version 1.0 signals
J6035APC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
J6038APC Board Interface - HP JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector
J6061APC Board Interface - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
J6062APC Board Interface - JetDirect WP110 IEEE 802.11b (Wi-Fi) wireless print server - Connects to printer using parallel printer port
C6426-40102Peg - Separator Peg - Pushes up the separator pad during the paper pick operation
8120-6260Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)
8120-6261Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-6262Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)
8120-8878Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)
8120-8879Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)
8120-8880Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)
8120-8881Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)
8120-8882Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-8883Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)
8120-8884Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)
8120-8885Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)
8120-8886Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)
8121-0564Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)
8121-1003Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)
C6736A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0950-2880Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector
0950-3807Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector
C6736A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C6736A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C6736A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C6736A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
J3263APrint Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN
J3265APrint Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
C6736A-PulleyPulley - Paper pick up tray motor pulley.
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6737-00027Regulator - Regulatory Label South Africa
C6736A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C6426-00006Retainer - Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly
C6409-20003Rod - Carriage rod - Slider/guide rod for the pen carriage assembly
C6680-20070Rod - Scanner slider rod - Scanner module moves along this rod
C6736A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C6736A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C4557-20002Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015Roller - Rear roller (Black) - Between paper and rear paper guide
C6429-60144Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism
C6455-60056Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges
C6736A-Roller_ADFRoller ADF - Feeder ADF roller for picking up paper from ADF unit.
C6736A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C6734-60073Scanner - Scanner module assembly - Moves under the scanner glass to scan the document
C6736A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6736A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6736A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C6736A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C6736A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C6736A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6736A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011Separator - Separator pad for HP DeskJet 700 Series
C6736A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6736A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6734-60068Service Manual - OfficeJet G Series Service CD
C6736A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4557-40066Shaft - Drive shaft with molded gears on each end
C4557-60013Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)
C6736A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C6426-40001Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C6455-40026Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C6736A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C4557-40069Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring
C6736A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C6426-40085Spitton - Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process
C6736A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C4557-00009Spring - Separator spring - Provides pressure between separator assembly and the center drive roller
C4557-00017Spring - Belt tension spring - Provides tension for carriage belt
C4557-00026Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges
C4557-20003Spring - Rear roller spring - Flexible axle for rear roller
C4557-20007Spring - Pinch spring - Provides tension on upper paper guide
C4557-20009Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly
C6426-00017Spring - Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate
C6426-20008Spring - Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot
C6426-20012Spring - Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position
C6680-80020Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges
C6680-80074Spring - Idler spring - Provides tension for the scanner belt idler assembly
C6736A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C4557-80001Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C6426-00004Support - Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide
C6680-40009Support - Glass assembly support - Retains the scanner glass inside the scanner bezel
C6426-40017Tower - Belt attachment tower - Used to attach the carriage belt to the carriage assembly
C6736A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C6429-40062Tray - Paper output business tray cover - Seperates the output media from the input media
C6734-40034Tray - Tray Cover Extension - Pulls Out of the Paper Output
C6429-60156Tray Assembly - Paper input business tray/drawer assembly - Includes tray base, pressure plate, width adjust, length adjust, and paper tray handles
C6736A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C6736A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C6736A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
C4557-60109Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring
C4557-40068Vent - Cap vent - For equalizing the print cartridge capping pressure
C6736A-WindowWindow - Top/front access door assembly - print cartridge access door window.
C6429-60006Wingframe - Right wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly
C6429-60007Wingframe - Left wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly
C4557-60014Wiper - Wiper assembly - Metal base with plastic wipers