HP parts list for C6740B officejet g95 all-in-one

C6426-80019 Absorber - Sponge - Absorbs excess ink and debris from cleaning print cartridges

C6740B-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

C6740B-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

C6740B-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

C6740B-ADF_Arm ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

C6740B-ADF_Feed_Assy ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

C6740B-ADF_Input_Tray Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

C6740B-ADF_Motor ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

C6740B-ADF_Output_Tray ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.

C6740B-ADF_Pad ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.

C6740B-ADF_PC_BRD ADF PC Board - Control Board on the ADF unit

C6740B-ADF_Roller_Kit ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.

C6740B-ADF_Scanner ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.

C6740B-ADF_Sensor_BRD ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

C6740B-ADF_Unit_Assy ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.

C6426-40070 Adjuster - Width adjuster assembly - Used to set the paper input tray to the width of the paper being used

C6426-60023 Adjuster - Paper tray width/length adjuster - Holds media against right wall of input tray or against the rollers

C6740B-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm

C6740B-Arm_Door Arm Door - Carriage access door sensor arm

C6740B-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper

C6740B-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter

C6740B-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray

C6740B-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt

C6429-40031 Bar - Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray

C6455-40050 Base - Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower

C6740B-Battery Battery - Battery pack for hp printer

C6426-40018 Beam - Belt attachment beam (I-shaped) - Used to secure the belt attachment tower to the carriage assembly

C6426-40115 Belt - Carriage belt - Moves the carriage assembly across the carriage rod

C6429-40001 Belt - Paper drive belt

C6680-80070 Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass

C6740B-Belt_ADF Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

C6740B-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod

C6740B-Belt_Duplex Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit

C6740B-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

C6740B-Belt_Scanner Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

C6680-40050 Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel

C6740-60001 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (English)

C6740-60002 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (French)

C6740-60003 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (German)

C6740-60004 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Italian)

C6740-60005 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Dutch)

C6740-60006 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Danish)

C6740-60007 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Spanish)

C6740-60008 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Finnish)

C6740-60009 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Norwegian)

C6740-60010 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Swedish)

C6740-60011 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Portuguese)

C6740-60012 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Korea)

C6740-60013 Bezel - OfficeJet G95 control panel bezel - Mounts in front of scanner - Has cut outs for control panel buttons (Cantonese)

C6740B-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

C6429-00014 Bracket - Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item

C6740B-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)

C6740B-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)

C6740B-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley

C8955A Button - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing.

5063-1254 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector

5063-1255 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.

8120-8909 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Austria)

8120-8910 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Belgium)

8120-8911 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark)

8120-8912 Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end

8120-8913 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel)

8120-8914 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy)

8120-8915 Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands)

8120-8916 Cable - Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end

8120-8918 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden)

8120-8921 Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong)

8120-8923 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa)

8121-0811 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

8121-0844 Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland)

8121-1037 Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long

C2890-80018 Cable - Telephone cable (five conductor) - RJ-11 (M) to GIGOGNE (M/F) - 3m (9.8ft) long (France)

C2890-80020 Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands)

C2890-80023 Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong)

C2946A Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.

C2947A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long

C3803-80001 Cable - Telephone cable (four conductor) - RJ-11 (M) to TAE-N (M) - 3m (9.8ft) long (Germany)

C5319-80004 Cable - Telephone cable (Sweden)

C5319-80005 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

C5319-80006 Cable - Telephone cable (South Africa)

C5319-80011 Cable - Telephone cable - One 3-pin (M) connector to RJ-11 (F) connector adapter and one 3.0m (9.8ft) long cable with RJ-11 (M) connectors on each end (Australia)

C5319-80012 Cable - Telephone cable - One 4-pin (M) connector to RJ-11 (F) connector adapter and one 3.0m (9.8ft) long cable with RJ-11 (M) connectors on each end (Korea)

C5319-80014 Cable - Telephone cable (Israel)

C6426-60059 Cable - Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long

C6429-80084 Cable - Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long

C6663-80001 Cable - Telephone cable (Belgium)

C6663-80002 Cable - Telephone cable (Austria)

C6663-80005 Cable - Telephone cable (Italy)

C6663-80007 Cable - Telephone cable (Denmark)

C6663-80008 Cable - Telephone cable (Finland, Norway)

C6663-80009 Cable - Telephone cable (Switzerland)

C6734-60008 Cable - Cable harness assembly - Has many connectors: an 18-pin (F), two 3-pin (F), a 4-pin (F), and two 5-pin (F) - Overall length is 72.9cm (28.7in)

C6735-80001 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

C6740B-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor

C6740B-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.

C6740B-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism

C6740B-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.

C6740B-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.

C6426-40064 Cam - Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position

C6740B-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

C6740B-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.

C6429-60162 Carriage - Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider

C6740B-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

C6740B-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base

C6740B-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

C6740B-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

C6740B-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage

C6740B-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

C6740B-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

C6740B-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

C6740B-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

C6680-40020 Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly

C6740B-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism

C6740B-Clutch_ADF Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder

C6740B-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.

C6735-60011 Control Panel - Control panel assembly with buttons (Does NOT include bezel)

C6740B-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.

C6426-40014 Cover - Top Cover (Bonnet) - Mounts on Top of the Spittoon in the

C6426-40086 Cover - Cover - For rear paper cleanout door assembly

C6431-60139 Cover - Top cover (Bonnet)

C6734-40024 Cover - Paper tray frame left side cover - Provides structural rigidity to the paper tray frame assembly

C6734-40025 Cover - Paper tray frame right side cover - Provides structural rigidity to the paper tray frame assembly

C6740B-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.

C6740B-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

C6740B-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

C6740B-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

C6740B-Display Display - Status led display (LCD display assembly).

C6426-60038 Door - Rear cleanout door assembly - Paper jam cleanout door

C6680-60014 Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch

C6740B-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.

C6740B-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

C6740B-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.

C6740B-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

C6740B-Drive_Assy_ADF Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

C6487-60050 Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)

C6740B-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability

C4557-80019 Encoder - Paper motor encoder disk

C6740B-Encoder Encoder - Encoder spring - provides tension for encoder strip

C6740B-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper

C6740B-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference

C6740B-Extender_ADF Extender ADF - Paper extension for the automatic document feeder (ADF) input tray

C6740B-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

C6740B-Extender_Output Extender Output - Paper exit tray extension

C6429-40063 Extension - Tray cover extension - Pulls out of the paper output tray/cover to hold longer media

C6740B-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit

C6740B-Fan_Vaccum Fan Vaccum - Vacuum fan assembly

C6735-60001 Fax Module - Fax module assembly - Provides fax capabilities for the OfficeJet (Includes LIU connector)

C6740B-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

C6740B-Feed_Rollers_ADF Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.

C3828A Film - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.

C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series

C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series

C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series

C6426-40052 Flag - OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide

C6426-40089 Flag - DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag

C6740B-Flag_ADF Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly

C6740B-Flag_Paper Flag Paper - OOPS flag - out of paper sensor

C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)

C6740B-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.

C6740B-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons

C4557-40021 Gear - Feed roller idler gear

C4557-40079 Gear - Transfer gear (double gear)

C5870-40017 Gear - Cluster gear (large gear)

C6426-40103 Gear - Kicker bar cam gear - Gear with cam lobe and offset pin

C6429-40005 Gear - Cluster gear for HP OfficeJet K60

C6740B-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor

C6740B-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station

C6740B-Gear_Double Gear Double - Transfer gear - has double gear attached on service station

C6740B-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

C6740B-Gear_Station Gear Station - Gears on shaft of spittoon station

C6740B-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.

C6680-60020 Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel

C6740B-Glass_Assy Glass Assembly - Main top copier glass assembly.

C4557-40121 Guide - Encoder disk guide

C6426-40021 Guide - Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken

C6426-40098 Guide - Lower paper guide housing (Does NOT include any attaching parts)

C6429-60141 Guide - Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide

C6682-40016 Guide - Length adjust guide - Media input length adjuster

C6740B-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

C6426-40067 Handle - Paper input tray left handle

C6426-40068 Handle - Paper input tray right handle

C6740B-Hinge_Cvr Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.

C6740B-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

C6680-60026 Idler - Scanner belt idler assembly - Maintains scanner belt tension

C6740B-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.

C6740B-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

C6740B-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly

C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series

C6050A Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series

C6426-40118 Kicker - Kicker bar - Restacks paper in paper input tray stack after the top sheet is picked

C6428-40001 Knob - Latch knob - Mounts on the rear paper cleanout door assembly

C6735-60013 Label - Fax speed dial label - Stick on label for customers to write on (for noting phone numbers for the fax speed dial buttons on the control panel)

C4557-40042 Latch - Plastic latch (Y-shaped)

C6680-40053 Latch - Latch (Wavy slot)

C6740B-Lid_Cover_Assy Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.

C6426-40100 Lifter - Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function

C6681-60020 Lifter - ADF assembly - Includes cover and ADF mechanism (Europe)

C6682-60033 Lifter - Lift plate assembly - Moves paper to the output tray in the automatic document feeder assembly from the scanner glass

C6429-60025 Link - Kicker bar cam link (spring loaded)

C6734-60070 LIU Module - LIU and fax module replacement kit - Kit includes the LIU assembly (for USA), the fax module, T-10 and T-20 torx L-keys and instructions

C6734-60071 LIU Module - LIU and fax module replacement kit - Kit includes the LIU assembly (for europe), the fax module, T-10 and T-20 torx L-keys and instructions

C6735-60004 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for Asia/Pacific)

C6735-60005 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for Australia)

C6735-60006 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for Europe)

C6735-60007 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for Korea)

C6735-60008 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for Canada)

C6735-60009 LIU Module - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT include LIU to wall socket cable (for the USA)

C6736-90144 Manual - Manual for OfficeJet G55 Series, OfficeJet G85 Series, OfficeJet G95 Series

C6736-90147 Manual - Manual for OfficeJet G55 Series, OfficeJet G85 Series, OfficeJet G95 Series

C4557-60003 Motor - Carriage motor assembly (Includes pulley)

C5870-60004 Motor - Service station motor assembly - Includes PC board and gear

C6429-60004 Motor - Paper drive motor assembly - Includes pulley

C6734-60022 Motor - Scanner motor and drive gear assembly - Provides the drive to move the scanner module

C6740B-Motor_ADF Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly

C6740B-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly

C6740B-Motor_Scanner Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

C6740B-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

C6740-60014 NamePlate - Nameplate - OfficeJet G95 logo (English)

C6740-60019 NamePlate - Nameplate - OfficeJet G95 logo (French)

C6740-60020 NamePlate - Nameplate - OfficeJet G95 logo (German)

C6740-60021 NamePlate - Nameplate - OfficeJet G95 logo (Italian)

C6740-60022 NamePlate - Nameplate - OfficeJet G95 logo (Dutch)

C6740-60023 NamePlate - Nameplate - OfficeJet G95 logo (Danish)

C6740-60024 NamePlate - Nameplate - OfficeJet G95 logo (Spanish)

C6740-60025 NamePlate - Nameplate - OfficeJet G95 logo (Finnish)

C6740-60026 NamePlate - Nameplate - OfficeJet G95 logo (Norwegian)

C6740-60027 NamePlate - Nameplate - OfficeJet G95 logo (Swedish)

C6740-60028 NamePlate - Nameplate - OfficeJet G95 logo (Polish)

C6740-60029 NamePlate - Nameplate - OfficeJet G95 logo (Korean)

C6740B-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

C6409-80003 Pad - Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod

C6740B-Pad_ADF Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

C6740B-Pad_Tray Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts

C6734-40019 Panel - Rear panel (U-shaped) - Covers the rear of the printer and the ground plane assembly

C6734-40020 Panel - Left side panel - Covers the left side of the print mechanism

C6734-40021 Panel - Right side panel - Covers the right side of the print mechanism

C6735-40004 Panel - LIU cover panel - Holds the LIU module in the OfficeJet - Mounts on the right rear corner

51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets

51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1821A Paper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)

C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets

C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets

C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets

C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package

C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets

C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets

C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets

C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6042A Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer

C6044A Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes

C6045A Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes

C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

C6818A Paper - Paper (Glossy) for OfficeJet 5615 Series, OfficeJet 5605 Series, OfficeJet 6310 All-in-One, OfficeJet 6301 Series

C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes

C6831A Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets

C6832A Paper - Paper (Glossy) for DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series, DeskJet F4140 Series, DeskJet F4135 All-In-One

C6944A Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets

C6951A Paper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series

C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets

C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

C7013A Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package

C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

C7020A Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets

Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series

Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper

C6734-60151 PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.

C6734-60152 PC Board - Interconnect PC board (L-SHAPED) - Interconnects the scanner assembly to the main logic board - Also has the paper and door sensors

C6734-68001 PC Board - Main PC Board - Controls and Drives the Printer - Mounts in rear of the unit for computer connecting.

C6740B-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only

C8154-60073 PC Board - Interconnect PC board - Small square PC board with four contact pads for the duplexer module

C6740B-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

C6426-40102 Peg - Separator Peg - Pushes up the separator pad during the paper pick operation

C6740B-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs

C6426-60020 Plate - Pressure plate - Mounts in the rear of the paper input tray - Used to push the paper stack into the feed roller

8120-6260 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)

8120-6261 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-6262 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)

8120-8878 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)

8120-8879 Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)

8120-8880 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)

8120-8881 Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)

8120-8882 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

8120-8884 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)

8120-8885 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)

8120-8886 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)

8121-0564 Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)

8121-1003 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)

C6740B-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.

0950-3807 Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector

C6740B-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

C6740B-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

C6740B-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).

C6740B-Power_Supply_BRD Power Supply Board - High voltage power supply board

C6740B-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

C6740B-Pulley Pulley - Paper pick up tray motor pulley.

C6740B-Pulley_ADF Pulley ADF - ADF feeder motor pulley

5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

C6740B-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C6426-00006 Retainer - Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly

C6409-20003 Rod - Carriage rod - Slider/guide rod for the pen carriage assembly

C6680-20070 Rod - Scanner slider rod - Scanner module moves along this rod

C6740B-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on

C6740B-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on

C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide

C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide

C6429-60144 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism

C6455-60056 Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges

C6740B-Roller_ADF Roller ADF - Feeder ADF roller for picking up paper from ADF unit.

C6740B-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.

C6740B-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

C6734-60073 Scanner - Scanner module assembly - Moves under the scanner glass to scan the document

C6740B-Scanner Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6740B-Scanner_Assy Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.

C6740B-Scanner_Belt Scanner Belt - Scanner belt attaches from the scanner to the scanner motor.

C6740B-Scanner_Cable Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

C6740B-Scanner_Motor Scanner Motor - Scanner driving motor

C6740B-Scanner_Unit Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.

C5365-60629 Sensor - Flag and cable assembly - Media sensor

C6426-60013 Sensor - Spot sensor assembly

C6740B-Sensor_ADF Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

C6740B-Sensor_Exit Sensor Exit - Exit media sensor sv

C6740B-Sensor_Open Sensor Open - Door sensor assembly - open door sensor

C6740B-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

C6740B-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.

C4557-60011 Separator - Separator pad for HP DeskJet 700 Series

C6740B-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

C6740B-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.

C6734-60068 Service Manual - OfficeJet G Series Service CD

C6740B-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position

C4557-40066 Shaft - Drive shaft with molded gears on each end

C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)

C6740B-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

C6426-40001 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis

C6455-40026 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis

C6740B-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring

C6740B-Speaker Speaker - Speaker assembly - includes speaker cable.

C6426-40085 Spitton - Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process

C6740B-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller

C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt

C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges

C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller

C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide

C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly

C6426-00017 Spring - Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate

C6426-20008 Spring - Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot

C6426-20012 Spring - Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position

C6680-80020 Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges

C6680-80074 Spring - Idler spring - Provides tension for the scanner belt idler assembly

C6740B-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension

C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

C6426-00004 Support - Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide

C6680-40009 Support - Glass assembly support - Retains the scanner glass inside the scanner bezel

C6426-40017 Tower - Belt attachment tower - Used to attach the carriage belt to the carriage assembly

C6740B-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.

C6426-40123 Tray - Paper input tray base

C6429-40062 Tray - Paper output business tray cover - Seperates the output media from the input media

C6682-60017 Tray - Legal tray extension - Attaches to the input tray extension on the automatic document feeder (ADF) assembly

C6682-60021 Tray - Output tray extension - Attaches to the rear tray slot on the automatic document feeder (ADF) assembly

C6682-60022 Tray - Input tray extension

C6429-60156 Tray Assembly - Paper input business tray/drawer assembly - Includes tray base, pressure plate, width adjust, length adjust, and paper tray handles

C6740B-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).

C6740B-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.

C6740B-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.

C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring

C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure

C6740B-Window Window - Top/front access door assembly - print cartridge access door window.

C6429-60006 Wingframe - Right wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly

C6429-60007 Wingframe - Left wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly

C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers

HP officejet g95 all-in-one printer (C6740B)

HP parts list for C6740B HP officejet g95 all-in-one printer