HP parts list for C7791H DesignJet 130r

C8108-67048 Belt - Output Belt (1 per) Svc Output Belt (1 per) Svc

Q1292-67001 Belt - Output Belt (1 per) Svc Output Belt (1 per) Svc

Q1292-67026 Belt - Carriage belt - Used to move the carriage from side to side

Q1292-60238 Bracket - ROLLFEED HARNESS SUP KIT ROHS SVRollfeed support bracket - Used in conjunction with the automatic rollfeed kit. ( For automatic rollfeed kit Q1247A).

C7790-60425 Cable - USB interface cable - Type 'A' connector to type 'B' connector - 5m (16.4ft) long

Q1292-67010 Cable - Front panel cable - Connects the front panel to the main logic PC board

Q1292-67014 Cable - Encoder harness

Q1292-67029 Cable - Motor harness uly svc kit

Q1292-67017 Cam - Pick cam for HP DesignJet 100 series units, Pick cam - Located on the left-side of the print mechanism.

C7769-40153 Cap - Hewlett Packard (HP)Hub spindle black svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.

C7769-40169 Cap - Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.

HC129PE Care Pack - HP 1-year Post-Warranty PhoneAssist DesignJet 70 90 1xx Service

U3477E Care Pack - HP 3 year Next business day Onsite DesignJet 70 90 1xx Hardware Support

U4662PE Care Pack - HP 1 year Post Warranty Next business day Onsite DesignJet 70 90 1xx Hardware Support

UC744E Care Pack - HP Network Installation DesignJet 70 90 1xx Service

UP426PE Care Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite DesignJet 70 90 1xx Hardware Support

UP427PE Care Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite DesignJet 70 90 1xx Hardware Support

UP428E Care Pack - HP 5 year 4 hour response 13x5 Onsite DesignJet 70 90 1xx Hardware Support

UP429E Care Pack - HP 4 year 4 hour response 13x5 Onsite DesignJet 70 90 1xx Hardware Support

UP430E Care Pack - HP 3 year 4 hour response 13x5 Onsite DesignJet 70 90 1xx Hardware Support

UP431E Care Pack - HP 5 year 4 hour response 9x5 Onsite DesignJet 70 90 1xx Hardware Support

UP432E Care Pack - HP 4 year 4 hour response 9x5 Onsite DesignJet 70 90 1xx Hardware Support

UP433E Care Pack - HP 3 year 4 hour response 9x5 Onsite DesignJet 70 90 1xx Hardware Support

UP434E Care Pack - HP 5 year Next business day Onsite DesignJet 70 90 1xx Hardware Support

UP435E Care Pack - HP 4 year Next business day Onsite DesignJet 70 90 1xx Hardware Support

UP436E Care Pack - HP 2 year Next business day Onsite DesignJet 70 90 1xx Hardware Support

UQ478PE Care Pack - HP 2 year Post Warranty Next business day Onsite DesignJet 70 90 1xx Hardware Support

Q1292-60202 Carriage - Carriage assembly - Includes trailing cable and carriage belt and does not include the carriage height tool

Q1292-67037 Carriage - Carriage assy uly d rohs sv. CARRIAGE ASSY ULY D ROHS SVCarriage assembly - Includes trailing cable and carriage belt and does not include the carriage height tool

Q1292-67040 Carriage - CARRIAGE ASSY ULY D ROHS SV Carriage assembly - Includes trailing cable and carriage belt and does not include the carriage height tool

Q1292-67021 Control Panel - Control panel - Front left control panel

Q1292-67032 Control Panel - control panel display for Designjet 30gp

C7791-60297 Cover - Paper input tray cover - Black platic cover that is placed on top of the paper input tray

C7791-60300 Cover - Left cover assembly - Houses the control panel

C7796-67002 Cover - Rear trim kit - Attaches to the rear of the printer on either side of the back/center cover (two used)

Q1292-60258 Cover - Back/center cover - Covers the back and center of the printer and is located under the access door

Q1292-60271 Cover - Right cover assembly - Houses the ink supply station and service station

C7790-60457 Door - Printhead door assembly - Provides access to the printheads - Includes ink cartridge door hinge

C7791-60277 Door - Access door - Covers the top of the printer and provides access to the printheads and carriage

C7791-60294 Door - Ink cartridge door - Provides access to the ink cartridges - DesignJet 130 ONLY

Q1292-67003 Encoder - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

Q1292-67019 Encoder - Disc-encoder one per svc Paper motor encoder disk

Q1292-67039 Encoder - Disc-Encoder One Per Svc Paper motor encoder disk

Q1292-67009 Filter - Filter assembly - Located inside the right side cover

Q1292-67007 Foam - Ink Service Station (ISS) bottom absorber foam - Absorbs ink during the cleaning process - Smaller of the two

Q1292-67011 Foam - Ink Service Station (ISS) rear absorber foam

Q1292-67023 Guide - Inner paper guide One per svcInner paper guide - Guides the paper through the paper path - Mounts behind the pickup roller assembly

Q1292-60152 Holder - Encoder strip holder - Wire loop that connects to the carriage assembly that is used to hold the encoder strip

Q1292-67005 Holder - Ink tube holder

Q1292-60235 Ink Delivery System - RIDS assembly - Transports ink from the ink supply station to the printheads

C7790-60449 Label - Ink cartridge color label - Located under cartridge access door

C7790-60450 Label - Printhead access instruction label - Located under cartridge access door

Q1246-60010 Media Bin - Paper bin assembly;Click to order the functional equivalent: CH336-67013

Q1292-67034 Module - ULYSSES DE MODULE ASSY ROHSS Electronics module assembly

C8108-67040 Motor - Ramp motor assembly

Q1292-60207 Motor - Carriage drive motor - Drives the carriage belt

Q1292-60218 Motor - Paper motor assembly

Q1292-60219 Motor - Ramp motor assembly

C7790-60451 Overlay - Front panel overlay - Located on left front lower corner of top cover assembly

Q1292-67020 PC Board - Pca-cleanout interconnect

C7796-60217 Pivot - Pivot assembly - Black plastic part under platten - Supports pick roller

C7791-60287 Platen - Bypass platen assembly

Q1292-60227 Platen - Print platen - Surface that supports paper during printing

CQ533-60002 Power Cord - Power cord - For use with Designjet printers (America)

Q1292-67033 Power Supply - Power supply rohs sv power supply rohs sv Worldwide input power supply - 100-240VAC, 50/60Hz, 68W - Includes fan

Q1292-67038 Power Supply - POWER SUPPLY ROHS SV Worldwide input power supply - 100-240VAC 50/60Hz 68W - Includes fan. Does not include Formatter board C7796-69156

C7791H-Repair_DesignJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

Q1292-60210 Roller - Pick roller assembly - Picks media from the input paper tray and feeds it through the paper path

Q1292-60211 Roller - Feed roller assembly - Includes encoder disk and paper-axis motor assembly - Feeds media under the carriage assembly

Q1292-67015 Roller - Upper paper guide roller - Helps to guide media through paper path

Q1292-67018 Roller - Lower paper guide roller kit - Helps to guide media through paper path

Q1292-60150 Sensor - OOPS sensor and connector are included. Out-of-paper sensor (OOPS) - Detects when paper supply is empty

Q1292-67016 Sensor - Duplexer out of paper sensor (OOPS) harness

Q1292-67022 Sensor - Door sensor assembly - Senses when the access door is opened or closed

C7791H-Manual_DesignJet Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.

Q1292-60206 Service Station - Ink supply service station (ISS) assembly 6 drain holes and 6 sponges.

Q1293-60049 Service Station - Ink supply service station (ISS) assembly - For DesignJet 30/90/130 series printers

Q6655-60127 Shield - Side shield sv for HP C7790A

C7769-60184 Spindle - 24-inch spindle rollfeed kit for hp Designjet 110 120 130 series

C7769-60401 Spindle - Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper, spindle takes one on each side. Part number is for one pc.

C7797-60008 Spindle - 24-inch spindle rollfeed kit for hp Designjet 110 120 130 series

Q1292-67006 Spring - Belt tensioner spring

C7791-60245 Starwheel - Starwheel assembly - Provides downward pressure on media as it passes through the feed rollers

C7791-60304 Starwheel - Starwheel D-size Assy. S Starwheel D-size Assy. SV

C7791-00007 Strip - Hewlett Packard Designjet/Plotter Encoder Strip

Q1293-60068 Support - Output mechanism support assembly

C7791-60280 Tray - Paper output tray assembly

Q1292-60097 Tray - Paper input tray assembly - Holds paper supply for printer

Q1292-67012 Turnaround Assembly - Turnaround assembly

CH336-67013 Wheel - Stand svc kit 24 inch

HP DesignJet 130r (C7791H)

HP parts list for C7791H HP DesignJet 130r Printer