HP parts list for C8187A HP officejet pro l7580 all-in-one printer
C8187A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C8187A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
0957-2093Accessory - Power module - Input voltage 100–240 VAC, 50–60 Hz, Output voltage 31.5VCD, 80watts - Has a C14 AC inlet plug - Requires a separate 3-wire power cord (Worldwide)
C8187-60034Accessory - Hp officeJet pro l7500 l7600 l7700 all in one ac adapter power supply oem
C8187A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C7309-60089ADF - ADF paper separation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear of the paper input tray, with mylar backing.
CC334-60068ADF - ADF upper pick roller replacement kit, double roller kit for adf paper feeding.
Q3460-60015ADF - White background assembly - Located in the automatic document feeder (ADF)
C8187A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C8187A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C8187A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C8187A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C8187A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C8187A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C8187A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C8187A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C8187A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C8187A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C8187A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C8184-67040Belt - Blt - carriage belt unit for officJet pro printer series.
C8187A-Belt_ADFBelt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
C8187A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C8187A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C8187A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C8187A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C8187-67340Bezel - Control panel bezel - For the Officejet Pro L7580 printer (English)
C8187-67342Bezel - Control panel bezel - For the Officejet Pro L7580 printer (French for use in EMEA)
C8187-67523Bezel - Bezel for Officejet Pro L7680 Color, OfficeJet Pro L75X0 Series, OfficeJet Pro L7590 Color, OfficeJet Pro L7555 Color
8121-0811Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
8121-0868Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
C8187A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C8187A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C8187A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C8187A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C8187A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C8187A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C8187A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C8187A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C8187A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C8187A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C8187A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C8187A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C8187A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C8187A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C8187A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C8187A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C8187-60013Cover - ADF base cover assembly - Bottom half of ADF assembly that sits on top of flatbed scanner
C8187A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C8187A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C8187A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C8187A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C8187A-DisplayDisplay - Status led display (LCD display assembly).
C8157-60087Door - Main PC board door assembly - Includes the ink supply service station (ISS) door sensor
C8187-40005Door - Ink Distribution System (IDS) door (do not get confused with C8187-67304)
C8187-67302Door - Door - Covers the ink delivery station
C8187-67304Door - Pen cartridge door - Access door for changing the printer ink cartridges (do not get confuse with C8187-40005)
C8187-67337Door - Cleanout assembly door - Rear access door that provides access to paper jams
C8187A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C8187A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C8187A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C8187A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C8187A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C8184-67019Duplexer - HP Inkjet Automatic Two-sided Printing Accessory - For Officejet Pro K5400 and Officejet Pro L7500/7600/7700 all-in-one series printers
C8255-60001Duplexer - HP automatic 2-sided printing accessory
C8255ADuplexer - HP automatic 2-sided printing accessory
C9278-60001Duplexer - Auto Duplexing unit for hp units. Double sided priting capabilities.
C9278ADuplexer - InkJet Automatic Two-sided Printing Accessory (duplexer) - For OfficeJet Pro K5400 and OfficeJet Pro L7500/7600/7700 all-in-one series printers
C8157-67030Encoder - Encoder disk - Plastic disk part - Helps to provide position information of the paper
C8184-80015Encoder - Encoder strip (A-Size) - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C8187A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C8187A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C8187A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C8187A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
C8187A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C8187A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C8187A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
C8187A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
0403-1155Foot - Bumper foot - Replacement rubber foot for the bottom of the printer (four used)
C8187A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C8187-67300Frame - Mylar frame assembly - Holds the mylar in place - Located in the ADF assembly
C8187A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
C8187A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C8187A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C8187A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C8187A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C8187A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C8187-60035Hinge - Automatic document feeder (ADF) hinge assembly
C8187A-Hinge_CvrHinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
C8184-80049Holder - Corrugated carriage restraint (CCR) - For the OfficeJet Pro L7590 All-in-One printer series
C8187A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C8187A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
C8184-67035Ink Delivery System - Replaceable ink delivery system (RIDS) - Carries ink from ink supply station to ink cartridges
C8187A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C8184-67037Ink Supply Station - INK SUPPLY STATION Ink supply station (ISS) assembly - Holds the ink cartridges and pumps ink through the IDS (Ink Delivery System) into the printheads
C8187A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
C8187A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C8187A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C8187A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
6040-0990Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil)
C8187A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C8187-80068Pad - ADF separation pad assembly - Helps separate paper in the ADF
C8187A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C8187A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
C8184-90015Paper - Poster for Officejet Pro L7680 Color
C8187-90015Paper - Poster for Officejet Pro L7680 Color, OfficeJet Pro L75X0 Series, OfficeJet Pro L76X0 Series, OfficeJet Pro L77X0 Series
Q5458APaper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series
Q6568APaper - Paper (Glossy) for DeskJet 660 Series, DeskJet 300, DesignJet 1055 Series, DeskJet 5550 Series
Q6569APaper - Premium Plus Soft-Gloss Photo Paper (Matte) - A size (8.5 x 11-inches) - 25 sheets (North America)
Q7853APaper - Paper (Glossy) for Business Inkjet 1200 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800
Q8760APaper - Paper (Semi-Glossy) for PhotoSmart C41X0 Series, Photosmart C4183 All-in-One, PhotoSmart C51XX Series, Photosmart C5180 Series All-In-One
Q8761APaper - Paper (Semi-Glossy) for DeskJet 640 Series, DeskJet 450 Series, DeskJet 9300 Printer, DeskJet 9800
Q8764APaper - Paper (Glossy) for DeskJet 640 Series, DeskJet 450 Series, DeskJet 9300 Printer, DeskJet 9800
C8184-60077PC Board - Carriage PC board (PCA) - Located below the carriage cover
C8187A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C8187A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C8187A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C8184-80013Platen - Print platen - Surface that supports paper during printing
C8187-40001Plotter - Case for Officejet Pro L7680 Color, OfficeJet Pro L75X0 Series, OfficeJet Pro L7590 Color, OfficeJet Pro L7555 Color
C8413-40030Plug - RJ11 Plug - Inserted into the RJ11 socket when not in use
Q3093-40033Plug - RJ45 Plug - Inserted into the RJ45 socket when not in use (For use in Europe)
8121-1023Power Cord - AC power cord (Black) - 3-conductor, 0.5m (19.6in) long
C8187A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C8187-67339Power Module - Power module - Input voltage 100-240VAC, 50/60Hz - Output voltage 32VDC, 2500mA - Requires a detachable AC power cord (Worldwide)
C8187A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C8187A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C8187A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C8172-80024Primer - Primer for Officejet Pro L7680 Color, OfficeJet Pro L75X0 Series, OfficeJet Pro L7590 Color, OfficeJet Pro L7555 Color
C8184-67031Primer - Primer assembly (clearing station) - To prime print cartridges
C8187A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C9381-30002Printhead - 88 Black and Yellow printhead
C9381-30003Printhead - Printhead for Officejet Pro L7680 Color, OfficeJet Pro L7590 Color, OfficeJet Pro L7590 AIO Printer, OfficeJet Pro L7555 Color 88 Black and Yellow printhead
C8184-90001Reference - Tray Flyer - paper version for Officejet Pro L7680 Color OfficeJet Pro L75X0 Series OfficeJet Pro L76X0 Series OfficeJet Pro L77X0 Series
C8187A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C8187A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C8187A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C8187A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C8187-67507Scanner - Scanner module assembly - For the OfficeJet Pro L7590 All-in-One printer series
C8187A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
CB532-60103Scanner - Hewlett Packard copier laser scanner unit; scanner head for copier.
C8187A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C8187A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C8187A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C8187A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C8187A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C8187A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C8187A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C8187A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C8413-10002Service Parts - Rev A Aio Extended Eol Copy Target
C8184-67036Service Station - Service station assembly - For conditioning the printheads when the carriage is in its home position
C8187A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C8184-80072Shield - Fan finger guard (shield) - Mounts on the back side of the fan
C8187A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C8187A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C8187A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C8187A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C8187A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C8187A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
Repair It
Exchange It
View Supplies
Service Manual
