C6745-80005AC Adapter - AC Adapter for DeskJet 6620 Series
C7315AAC Adapter - AC Adapter for DeskJet 6620 Series
C6426-60023Adjuster - Paper tray width/length adjuster - Holds media against right wall of input tray or against the rollers
C6409-00009Backbone - Backbone - Large metal item attached to the front of the printer base
C6455-00006Backbone - Backbone - Large metal item attached to the front of the printer base
C6429-40031Bar - Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray
C6455-40050Base - Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower
C6745-80011Battery - Battery for DeskJet 6620 Series
C6745-80012Battery - Battery for DeskJet 6620 Series
C6426-40018Beam - Belt attachment beam (I-shaped) - Used to secure the belt attachment tower to the carriage assembly
C6426-60033Button - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)
C8955AButton - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing.
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C5384-80003Cable - Video output cable - 1/8-inch plug to RCA (M) - 5m (16ft) long
C6426-60007Cable - Cable assembly - Has many connectors: a 30-pin (F), a 2-pin (F), two 3-pin (F), a 4-pin (F), two 5-pin (F), and an 8-pin (F) - Overall length is 67.3cm (26.5in)
C6426-60059Cable - Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long
C6429-80084Cable - Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long
C6745-80001Cable - Serial cable with ferrite - 8-pin mini-DIN (M) to DB-9 (F) - 1.0m (3.3ft) long
C6745-80002Cable - USB interface cable with ferrite - Type A connector to 8-pin (M) mini-DIN - 0.9m (3.0ft) long
C6426-40064Cam - Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position
C6487-40008Cap - Link-cap for HP DeskJet 6620 Series
C6745-80022Cap - Lens cap for HP DeskJet 6620 Series
C6429-60162Carriage - Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C6426-40052Flag - OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide
C6426-40089Flag - DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag
C4557-40118Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
C6428-60013Frame - Paper tray frame assembly - Includes paper tray frame, paper tray cover, paper tray side covers, springs, and cam
C6409-40030Guide - Spring guide for HP DeskJet 880C Series
C6426-40021Guide - Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken
C6426-40033Guide - Rear guide - Large plastic piece in the duplexer in which the rollers and springs mount on
C6426-40034Guide - Inner guide - The large, curved plastic guide installed in the rear of the duplexer surrounding the roller shafts
C6426-40035Guide - Flip guide (Curved plastic piece with large fins)
C6426-40036Guide - Slot cover flap (Curved plastic piece with small fins)
C6426-40098Guide - Lower paper guide housing (Does NOT include any attaching parts)
C6426-60021Guide - Media input length adjuster assembly - Includes both coarse and fine length adjusters
C6426-00007Latch - Wedge latch for HP DeskJet 950C Series
C6426-00015Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
C6426-40100Lifter - Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function
C6429-60025Link - Kicker bar cam link (spring loaded)
C6409-80003Pad - Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod
C6426-60054Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts
Q7981APan - Advanced High-Gloss Photo Paper - 13cm (5in) x 18cm (7in) - 20 sheets (Japan)
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634ZPaper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812APaper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820APaper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1821APaper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824APaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853APaper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C5976APaper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976BPaper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C5977APaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets
C5977BPaper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets
C6039APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6042APaper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer
C6043APaper - Paper (Photo) for DeskJet 1100 Series, DeskJet 1120 Series, DeskJet 1220 Series, DeskJet 1200 Series
C6055APaper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6428-90006Paper - DeskJet Setup Poster - For Microsoft Windows - Has instructions for both parallel and USB cable setup (English)
C6428-90082Paper - DeskJet setup poster - For Apple Macintosh (English, Spanish, French, and Portuguese)
C8154-60073PC Board - Interconnect PC board - Small square PC board with four contact pads for the duplexer module
J3258BPC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3263GPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4155APC Board Interface - External JetDirect 70X home print server - Uses telephone wiring to establish a local area network for remote printer operation - For Microsoft Windows 95/98/NT 4.0 - Uses 1Mbps HomePNA version 1.0 signals
C6426-40102Peg - Separator Peg - Pushes up the separator pad during the paper pick operation
C6426-40020Pivot - Pivot - Large plastic item installed over the Feed Roller Assembly
8120-8336Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)
8120-8337Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)
8120-8341Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8120-8345Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)
8120-8346Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China)
8120-8900Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900
8121-0022Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8121-0023Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)
C6745-80006Power Cord - Power Cord for DeskJet 6620 Series
C6745-80007Power Cord - Power Cord for DeskJet 6620 Series
C6745-80008Power Cord - Power Cord for DeskJet 6620 Series
C6745-80009Power Cord - Power Cord for DeskJet 6620 Series
C6745-80010Power Cord - Power Cord for DeskJet 6620 Series
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6426-00006Retainer - Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly
C6409-20003Rod - Carriage rod - Slider/guide rod for the pen carriage assembly
C4557-20002Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C6426-60035Roller - Roller shaft assembly - Shaft with three large rollers, two bearings, and one gear
C6426-60049Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6429-60144Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism
C6455-60056Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges
C4557-60013Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)
C6426-40037Sled - Long roller sled - Installed over rear roller
C6426-40038Sled - Short roller sled - Installed over rear roller
C6426-40001Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C6455-40026Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C4557-40069Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring
C6426-40085Spitton - Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process
C2145-00033Spring - ESD spring - Installed between ESD blade and carriage PC board
C4557-00009Spring - Separator spring - Provides pressure between separator assembly and the center drive roller
C4557-00017Spring - Belt tension spring - Provides tension for carriage belt
C4557-00026Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges
C4557-20003Spring - Rear roller spring - Flexible axle for rear roller
C4557-20007Spring - Pinch spring - Provides tension on upper paper guide
C4557-20009Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly
C4557-20024Spring - Shifter spring - Provides tension on the pivot
C6409-00011Spring - Encoder spring - Provides tension for encoder strip
C6426-00017Spring - Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate
C6426-20002Spring - Send RFQ below for updated Price and Description
C6426-20008Spring - Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot
C6426-20011Spring - Rod spring - Installed on right side of backbone
C6426-20012Spring - Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position
C6487-00032Spring - Spring-pinch for HP DeskJet 6940 Series
C6487-20005Spring - Spring-rod for HP DeskJet 6620 Series
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6745-80003Strap - Camera neck strap - For the PhotoSmart C500 digital camera
C4557-80001Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C6426-00004Support - Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide
Repair It
Exchange It
View Supplies
Service Manual
