C9103A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C9103A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C9103A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C9103A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C9103A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C9103A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C9103A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C9103A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
C9103A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
C9103A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
8121-0868Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
C6520ACable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long
RS971AACable - HP USB 2.0 Interface Cable - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
C9103A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C9103A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C9103A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C9103A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C9103A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C9103A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C9103A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C9103A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C9103A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C9103A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C9103A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C9103A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
C9103A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C9103A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C9103A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C9103A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C9103A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C9103A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C9103A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C9103A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C9103A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C9103A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C9103A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C9103A-DisplayDisplay - Status led display (LCD display assembly).
C8974-60014Door - Cleanout door assembly - Used to remove paper jams
C8974-60023Door - Main access door - Provides access to ink cartridges
C8974-60040Door - Pen access door - Allows access to the print cartridges - For the DeskJet 3658 printer series
C8974-60041Door - Pen access door - Allows access to the print cartridges - For the DeskJet 3668 printer series
C8974-60042Door - Cleanout assembly door - Rear access door that provides access to paper jams - For the DeskJet 3668 printer series
C9103A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C9103A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C9103A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C9103A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C9103A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C9103A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C9103A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
C9103A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C8974-40022Extension - Paper output extension tray - Extends from the paper output tray to accommodate various sizes of print media
C8974-40066Extension - Paper output extension tray - Extends from the paper output tray to accommodate various sizes of print media - For the DeskJet 3668 printer series
C8974-40067Extension - Paper output tray extension stop - Stops the paper as it exits the printer - For the DeskJet 3668 printer series
C9103A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C3828AFilm - Film (Transparency) 8.5 x 11 5mil thick. for OfficeJet R65 Series PhotoSmart P1000 PhotoSmart P1100 OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
Q1973AFilm - Film (Glossy) for DeskJet 3600 series, DesignJet 100 Series, DeskJet 450 Series, OfficeJet T65 Series
C4557-40118Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
C9103A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C9103A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
C9103A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
C9103A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
C9103A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
C9103A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C9103A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C9103A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C9103A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
C9103A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C9103A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
C9103A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C9103A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
Q7892APaper - Paper (Glossy) for HP Photosmart 428 Series Portable Photo Studio, PhotoSmart D5155 Series, PhotoSmart D5145 Series, PhotoSmart A430 Series
C9103A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C9103A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C9103A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C9103A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
8120-6260Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)
8120-6262Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)
8120-8878Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)
8120-8879Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)
8120-8880Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)
8120-8881Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)
8120-8882Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-8883Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)
8120-8884Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)
8120-8885Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)
8120-8886Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)
8121-0586Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Peoples Republic of China)
8121-0666Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Brazil and Thailand)
8121-1003Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)
C9103A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0950-4392Power Module - Power module (wall-mount type) - Input voltage 120VAC, 60Hz - Output voltage 15/32VDC, 18W - For use in the USA - Does not require a separate AC power cord
0950-4397Power Module - Power module - 100/240VAC input, 50/60Hz - Universal, for worldwide use - Requires a separate AC power cord with C13 connector
0957-2119Power Module - Power module (universal / worldwide) - Input voltage 100-240VAC, 50/60Hz, 600mA - Output voltage 15/32VDC, 20W - Requires a separate, detachable AC power cord with C13 connector
C9103A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C9103A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C9103A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C9103A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C8974-69003Printer - DeskJet 3650 printer echange unit - Does not include power module, power cord, or ink cartridges (US and Latin America)
C9103A-PulleyPulley - Paper pick up tray motor pulley.
C9103A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C9103A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
C9103A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
C9103A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C9103A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C9103A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C9103A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C9103A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C9103A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C9103A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C9103A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
C9103A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C9103A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C8974-40023Stop - Paper output tray extension stop - Stops the paper as it exits the printer
C9103A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C8941-40125Tray - Input tray assembly - Holds paper supply for printer
C9103A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C9103A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C9103A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
C9103A-WindowWindow - Top/front access door assembly - print cartridge access door window.
Repair It
Exchange It
View Supplies
Service Manual
