HP parts list for C9708A HP Color LaserJet 2500tn Printer
RB2-9904-000CNAirflow Guide - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side
RB3-0089-000CNArm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
RB3-0089-030CNArm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
J6057-69001Backbone - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-69011Backbone - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
J7934-69021Backbone - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
RB1-8668-030CNBelt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
RB3-0063-000CNBelt - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
RB3-0035-000CNBezel - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
RG5-6915-030CNBody - 250 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front cover
RG5-6921-000CNBody - 500 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front cover
RB2-2895-000CNBushing - Shaft bushing/retainer - Right side pickup roller support bushing
RB2-2896-000CNBushing - Shaft bushing/retainer - Left side pickup roller support bushing
RG5-7145-000CNCable - Front cable assembly (six connectors)
RG5-7146-000CNCable - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
RG5-7149-000CNCable - Connector assembly - Includes the 14-pin (F) interface connector and cable assembly
RG5-7161-000CNCable - Cable assembly (two 3-pin connectors and a spad lug)
RG5-7628-000CNCable - Cable assembly for HP Color LaserJet 2500 Series
RH2-5524-000CNCable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
RG5-6910-080CNCarousel - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
5090-3379Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner or Ink (1 per package) - Ideal for cleaning up toner spills and Ink for your plotter / copier / printer
WT2-5056-000CNClip - Cable clip - `C` shaped White plastic
XD2-1100-502CNClip - E-ring clip for HP Color LaserJet 1500 Series
RH7-5366-000CNClutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
RH7-5389-000CNClutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
RG5-7150-000CNConnector - Connector assembly - Includes the 14-pin (F) interface connector and cable assembly
RH2-5519-000CNConnector - Connector assembly - For optional paper tray
RH2-5520-000CNConnector - Connector for the fusing assembly - Seven small contol pins plus three separated high current pins
WS1-6336-000CNConnector - Connector assembly - For optional bottom paper tray
WT2-5737-000CNConnector - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
RG5-6927-000CNControl Panel - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
RB2-6453-000CNCover - Inner cover (Small Quartz Gray plastic cover with sensor flag slot)
RB2-9916-020CNCover - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
RB3-0028-000CNCover - Left side cover (Quartz Gray) - Does not include any attaching parts
RB3-0030-000CNCover - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
RB3-0032-000CNCover - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
RB3-0052-000CNCover - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
RB3-0102-000CNCover - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
RB3-0103-000CNCover - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
RB3-0104-000CNCover - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
RB3-0106-000CNCover - Left side frame/cover (Quartz Gray) plastic - Left side cover and input paper tray guide
RB3-0109-000CNCover - Front cover for the 250 sheet paper cassette tray (Blue) plastic - Has molded in paper loading instructions and a '2' on the front
RB3-0120-000CNCover - Solenoid cover (Steel) - For magnetic wave sheilding
RB3-0120-020CNCover - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
RB3-0140-000CNCover - Left cover plate (Quartz Gray) plastic - Mounts on the left side of the center frame assembly
RB3-0141-000CNCover - Right cover plate (Quartz Gray) plastic - Mounts on the right side of the center frame assembly
RB3-0165-000CNCover - Top inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
RB3-0166-000CNCover - Bottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
RB3-0282-000CNCover - Inner cover - Covers the small interconnecting PC board
RB3-0283-000CNCover - Inner cover - Covers the bottom of the connector that interconnects the input tray base to the printer
RG5-6900-000CNCover - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
RG5-6902-000CNCover - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
RG5-6919-000CNCover - Right side frame/cover assembly (Quartz Gray) plastic - Includes the right side cover and paper tray guide, the cassette retainer spring, tray 3 connector, printer interface connector, and rubber feet
RG5-6922-000CNCover - Front Cover for the 500 sheet paper cassette tray (blue plastic) - Has molded in paper loading instructions and a '3' on the front
RG5-6953-000CNCover - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
RB2-6452-000CNCross Brace - Cross-brace (metal plate with stamped in guide pin on left side)
RB2-6452-020CNCross Brace - Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly
RB3-0108-000CNCross Brace - Metal support cross-brace - Mounts on the top rear of the left and right support frame/cover assemblies
RB3-0108-020CNCross Brace - Metal support cross-brace - Mounts on the top rear of the left and right support frame/cover assemblies - For the base on the 250-sheet input tray assembly
RB2-6248-000CNDamper - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
RB3-0033-000CNDoor - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
RF5-4007-000CNDoor - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
RG5-6911-000CNDrive Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
RG5-6925-000CNDrive Assembly - Feed drive assembly - Includes the support frame, motor, gears, solenoid, and feed drive board
RG5-7629-060CNDrive Assembly - Feed drive assembly - Includes the support frame, motor, gears, solenoid, and feed drive board - Mounts on right side of the center frame assembly - For the base on the 500 sheet input tray assembly
C9704-67901Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
RH7-1537-000CNFan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
RH7-1630-000CNFan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
RB2-6448-000CNFlag - Mechanical sensor flag (black plastic)
RB2-9925-000CNFlag - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
RB3-0111-000CNFlag - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
RB3-0130-000CNFlag - Shaft mounted sensor flag (black plastic)
RB3-0132-000CNFlag - Mechanical sensor flag (black plastic)
RB3-0105-020CNFrame - Center support frame (black plastic) - Support structure for the paper pickup roller, feed roller, and paper sensors
RG5-6903-000CNFuser Assembly - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
RG5-6913-000CNFuser Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
RM1-3525-000CNFuser Assembly - Fusing assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
RB3-0022-000CNGear - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
RB3-0091-000CNGear - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
RB3-0092-000CNGear - 15 tooth gear with drive shaft (Black plastic)
RG5-6938-000CNGear - Gear assembly - Metal plate with two White plastic gears attached
RS7-0418-000CNGear - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
RB2-9912-000CNGuide - Top output bin guide - Small curved ribbed black plastic piece
RB2-9954-000CNGuide - Left paper feed guide (small Black plastic arm)
RB2-9955-000CNGuide - Right paper feed guide (small Black plastic arm)
RF5-4049-000CNGuide - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
RG5-6929-000CNGuide - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
RG5-6930-000CNGuide - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
RH7-1655-000CNMotor - Motor assembly for HP Color LaserJet 2500 Series
RB2-9960-000CNPad - Separation pad assembly - Includes the gray plastic frame with the rubber insert strip - For the cassette on the 250-sheet and 500-sheet input tray assemblies - Mounts in the paper cassette tray assembly Replaced by RF5-4258-020CN
RF5-4012-000CNPad - Separation pad assembly - Includes the separation pad, holder and spring
RF5-4047-000CNPad - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
RF5-4258-000CNPad - Separation pad assembly - Includes the gray plastic frame with the rubber insert strip
RF5-4258-020CNPad - Separation pad assembly - Includes the gray plastic frame with the rubber insert strip - For the cassette on the 250-sheet and 500-sheet input tray assemblies - Mounts in the paper cassette tray assembly.
RG5-6899-000CNPad - Separation pad assembly - Includes the metal pivoting support frame with the plastic snap-on separation pad assembly
RG5-6899-020CNPad - Separation pad assembly - Includes the metal pivoting support frame with the plastic snap-on separation pad assembly - For the cassette on the 500 sheet input tray assembly - Mounts in the paper cassette tray assembly
5851-1468Paper - LaserJet printer family paper specification guide
Q1298APaper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298BPaper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
C9145-67901PC Board - Formatter board assembly - Includes the formatter board and all the metal cage covers
C9145-69001PC Board - Formatter board assembly - Includes the formatter board and all the metal cage covers
C9705-69003PC Board - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
RG5-6964-000CNPC Board - Carousel position and toner level photoelectric sensor PC board - L Shaped PC board with the two sensors
RG5-6965-000CNPC Board - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly
RG5-6967-000CNPC Board - Registration sensor PC Board - Small board with flag activated photosensor
RG5-6968-000CNPC Board - Interconnecting feed drive PC board
RG5-7609-000CNPC Board - Carousel position and toner level photoelectric sensor PC board - `L` Shaped PC board with the two sensors
RG5-7612-000CNPC Board - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
RG5-7613-000CNPC Board - Registration sensor PC Board - Small board with flag activated photosensor
RG5-7615-000CNPC Board - Feed drive board assembly - Mounts on the right side of the center frame assembly - For the base on the 500 sheet input tray assembly
RH7-7146-000CNPC Board - Density photoelectric sensor PC board
RH7-7158-000CNPC Board - Density photoelectric sensor PC board
WG8-5382-000CNPC Board - Sensor PC board - Small board with flag activated photosensor
WG8-5593-000CNPC Board - Sensor PC board - Small board with flag activated photosensor
J4135APC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
J4167APC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
J6058APC Board Interface - HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot
RB3-0010-030CNPlate - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
RB3-0057-000CNPlate - Transfer slide plate - Small 'U' shaped metal insert plates
RB3-0065-000CNPlate - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
RB3-0066-000CNPlate - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
RB3-0286-000CNPlate - Contact plate for HP Color LaserJet 2500 Seriess
8120-6800Power Cord - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
8120-6809Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
8120-6810Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
8120-6811Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
8120-6812Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan)
8120-6813Power Cord - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
8120-6814Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark)
8120-6815Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland)
RG5-6960-000CNPower Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
RG5-7124-000CNPower Supply - Sub-high voltage board - Small auxillary PC board
RG5-7616-000CNPower Supply - Sub-high voltage board - Small auxillary PC board
RH3-2241-000CNPower Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
RH3-2243-000CNPower Supply - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
RH3-2252-000CNPower Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
RG5-6943-000CNPressure Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft
RG5-6943-020CNPressure Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
J6057-69011Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-61011Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-69001Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
RB3-0061-000CNPulley - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
RB3-0067-000CNPulley - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
RB3-0090-000CNRack Slide - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides
RG5-6956-000CNReader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RG5-6957-000CNReader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
RG5-7131-000CNReader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RG5-7132-000CNReader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
C9708A-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RB3-0037-000CNRod - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board
RB2-2892-000CNRoller - Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
RB2-7195-000CNRoller - Sensor flag roller (small White plastic roller)
RB2-9908-000CNRoller - Pressure roller (small Black hard plastic disk shaped roller)
RB2-9909-000CNRoller - Pressure roller (small Black hard plastic 'solid' roller)
RB3-0012-000CNRoller - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
RB3-0129-000CNRoller - Feed roller assembly - Includes the metal shaft and two small rubber rollers
RB3-0129-020CNRoller - Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assembly
RB3-0161-000CNRoller - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft
RF5-4035-000CNRoller - Pressure roller and arm assembly - Includes the small white roller, the holding arm, and roller scraper
RF5-4040-020CNRoller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper Part RF5-4040-000CN is no longer supplied. Please order the replacement, RF5-4040-020CN
RG5-5621-000CNRoller - Feed roller assembly - Includes shaft with rubber roller, bushings, and drive gear
RG5-5621-030CNRoller - Feed roller assembly - Includes shaft with rubber roller, bushings, and drive gear - Mounts on the underside of the center frame assembly - For the base on the 500 sheet input tray assembly
RG5-6897-020CNRoller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
RG5-6898-000CNRoller - Pressure roller assembly - Plastic support frame with two small spring loaded rollers - Rolls against the rubber feed roller
RG5-6936-000CNRoller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
RG5-6939-020CNRoller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
RG5-6952-000CNRoller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
RG5-6952-020CNRoller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
XA9-1263-000CNScrew - M3X5 Phillips washer-head machine screw with a broad, flat washer attached to the screw head - Used to fasten sheet metal parts together
XB4-7300-605CNScrew - Screw - 6 mm Phillips head screw with attached washer
XB4-7401-005CNScrew - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
C9708A-Manual_ColorService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
RB2-4933-000CNShaft - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever
RB3-0011-000CNShaft - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
RB3-0060-020CNShaft - Idler gear shaft - Short metal rod
RB2-9932-000CNShield - RFI shield - Parallel wire form mounted over the fan
RG5-6940-050CNShutter - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
RG5-6932-060CNSideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)
RG5-6932-070CNSideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
RG5-6934-000CNSideplate - Right rear side plate assembly - Includes the rear half of the metal right side plate, the fusing assembly drive motor and the three associated gears
RG5-6942-000CNSideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges
RG5-6942-030CNSideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
RS6-2766-000CNSpring - Tension spring for HP Color LaserJet 1500 Series
RB3-0009-000CNStatic Dissipater - Static eliminator ground plate - Right angled metal piece with small teeth on top edge
RB2-3019-000CNStop - Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use)
RB2-6472-000CNStop - Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use)
RB2-9963-000CNSupport - Separation pad support - Pivoting 'L' shaped metal support frame (Does NOT include the separation pad assembly)
RB3-0062-000CNSupport - PC board support (Black plastic holder)
RG5-6907-030CNSupport - Laser/scanner support assembly (sheet metal plate)
RG5-6931-000CNTray - Face-up output tray assembly - Includes the pull-down door and fusing assembly locking bracket (Does NOT include the lock releases)
RG5-6914-040CNTray Assembly - 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly
RG5-6920-000CNTray Assembly - 500 sheet paper tray assembly (complete) - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly
RG5-6937-000CNTray Assembly - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
Repair It
Exchange It
View Supplies
Service Manual