PF2282K040NICover - Pickup roller cover - `C` shaped plastic cover that surrounds the paper pickup roller assembly - Mounts on the bottom of the ADF cover assembly
PF2282K166NICover - ADF hinge flap - ESD hinge cover for ADF assembly
PF2282P041NICover - Jam access cover - Top access cover for ADF assembly
0950-4753Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height
5851-0673Drive Assembly - Kit-Hard Disk Drive replacement
5851-3833Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935.
RM1-1029-000CNDrive Assembly - Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly
RM1-1029-040CNDrive Assembly - Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly
RM1-1049-000CNDrive Assembly - Main drive gear assembly - Located at the rear part of the printer
Q5969-67901Duplexer - Duplexer assembly for LaserJet 4345 - For two sided printing
RK2-0278-000CNFan - Cooling fan - Located on left side of printer (FN101)
RK2-0280-000CNFan - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area
RK2-0472-000CNFan - DC Controller fan (FN104) - Provides air to the DC controller area
Q3701-60014Fax Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
5851-4076Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
RC1-0060-050CNFeeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
RC1-0061-000CNFeeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
RC1-0378-000CNFlag - Shutter flag for HP LaserJet M4345 MFP
RM1-0012-020CNFlag - Paper feed assembly - Includes torsion spring and paper feed roller assembly
RM1-1010-000CNFlag - Paper sensing guide - Paper guide/flag assembly with sensor (PS101)
Q7713-67951Flash Card - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7720-67951Flash Card - 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
PF2282K034NIFrame - ADF separation pad frame assembly - Includes the full width support structure and the ADF separartion pad assembly - Mounts in the top of the ADF assembly at the back of the input tray
CB425-69003Fuser Assembly - LJ 4345 220V Fuser, Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat
RM1-1043-000CNFuser Assembly - Fusing Assembly - For 100-127 VAC - Bonds toner to paper with heat
RM1-1043-080CNFuser Assembly - Fusing Assembly - For 100-127 VAC - Bonds toner to paper with heat
RM1-1044-040CNFuser Assembly - Fuser Assembly - 220 volts, Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat
RC1-0331-000CNGear - Gear - 20 tooth gear used to synchronize paper width adjustment stops - Located in right side bottom of cassette
RU5-0045-020CNGear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
RU5-0045-030CNGear - 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part.
RU5-0050-000CNGear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch
RU5-0253-000CNGear - Gear - 15 tooth gear located in right rear corner of 500 sheet paper cassette
RU5-0254-000CNGear - Gear - 14 tooth gear located in right rear corner of 500 sheet paper cassette
RU5-0256-000CNGear - 23 tooth gear - Located on right side under paper pickup drive assembly
RM1-1027-000CNGuide - Guide assembly - Guide that protects the large flat cable between the Scanner Controller PCA to the Formatter PCA
RM1-1046-020CNGuide - Entrance guide - Fuser paper entrance guide
5851-3230Hard Drive - Hard drive - For digital sending, copy, and storage
J7989AHard Drive - Hard drive - High performance EIO serial ATA hard drive
PF2282K008NIHinge - Hinge assembly - ADF right side hinge assembly
PF2282K041NIHinge - Hinge assembly - ADF left side hinge assembly
RC1-2901-000CNHinge - Door hinge - Right side door hinge - Two used
PF2282K043NIHolder - Mylar holder assembly - This is the cover (holder) that holds the Clear mylar sheet in place - Mounts on the bottom of the ADF assembly
RC1-2823-000CNHolder - Cover - Front cover lock stopper holder
RC1-2821-000CNLatch - Rear cover lock - Located at rear of upper plate assembly
5851-2766Lever - Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear
RM1-0043-060CNLever - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
RM1-1457-000CNLifter - Lifter drive assembly - For 500 sheet paper feeder assembly
RM1-1457-050CNLifter - Lifter drive assembly - For 500 sheet paper feeder assembly
RC1-2822-000CNLink - Handle link - Mechanical link between upper plate handle and release latch
RC1-3003-000CNLink - Power switch link - Mechanical link beteen metal rod and outside power switch
IR4041K102NILock - Scanner carriage lock assembly - Includes the brackect, the two slider/lock pieces and spring - Locks the optical assembly carriage in place to prevent damage when shipping
Q5997-67901Maintenance Kit - ADF maintenance kit - Includes the ADF paper pickup roller assembly, separation pad assembly, and three clear mylar replacement strips.
Q5997-67904Maintenance Kit - Maintenance kit - For 120 VAC - Includes Fuser Assembly, separation rollers, transfer roller, paper feed rollers, pick-up roller, gloves and instruction manual.
Q5998-67904Maintenance Kit - LaserJet 4345MFP printer maintenance kit (120V) - Includes Fuser Assembly separation rollers, transfer roller, paper feed rollers, pickup roller, gloves and instruction manual
Q5999-67904Maintenance Kit - LaserJet 4345MFP printer maintenance kit - For 220 VAC - Includes fusing assembly separation rollers, transfer roller, paper feed rollers, pickup roller, gloves, and instruction manual
Q7715-67951Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7718-67951Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7719-67951Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RK2-0273-000CNMotor - Main motor - M101 FOR HEWLETT PACKARD LaserJet MODELS.
RK2-0275-000CNMotor - Toner cartridge motor (M102) - Mounts on the front right side of the printer
RK2-0473-000CNMotor - Stepper motor (M104) - Crossing motor located in the paper reversing assembly
RK2-0474-000CNMotor - Stepper motor (M105) - Motor that drives the reversing roller located in the paper reversing assembly
RK2-0475-000CNMotor - Stepper motor (M106) - Paper delivery motor located in the paper reversing assembly
CB425-60127Multifunction - Control panel assembly - Control buttons and display located on top of the printer - Does not include overlay
PF2288K050NIMylar - Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly
CB425-60103Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)
CB425-60104Overlay - Control panel overlay - Snaps on top of the control panel assembly (French)
CB425-60105Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian)
CB425-60106Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch)
CB425-60107Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish)
CB425-60108Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands)
CB425-60109Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese)
CB425-60110Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian)
CB425-60111Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish)
CB425-60112Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finnish)
CB425-60113Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish)
CB425-60114Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish)
CB425-60115Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian)
CB425-60116Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech)
CB425-60117Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian)
CB425-60122Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish)
CB425-60123Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew)
CB425-60124Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek)
CB425-60125Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic)
CB425-60129Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian)
CB425-60130Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian)
CB425-60131Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovak)
CB425-60132Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian)
CB425-60149Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)Control Panel Overlay Ki Replacement.
PF2282K035NIPad - ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray
CB425-67902PC Board - Formatter PCA assembly - For LaserJet M4345MFP
CB425-67906PC Board - Formatter PC board assembly - For LaserJet M4345MFP
CB425-67910PC Board - Formatter PC board assembly - For LaserJet M4345MFP
CB425-67911PC Board - Formatter PC board assembly - For LaserJet M4345MFP
IR4041K512NRPC Board - Scanner Control Board (SCB) - Provides timing and control for the flatbed scanner
Q3701-60004PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Q3701-60010PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Q3701-60012PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Q3701-60020PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300
Q3701-60021PC Board - Modem PCA - HP LaserJet analog fax accessory 300
RM1-1041-040CNPC Board - Engine power supply board - For 110 VAC
RM1-1042-040CNPC Board - Engine power supply board - For 220 VAC
RM1-1354-000CNPC Board - DC Controller board - DC Controller PCA for LaserJet 4345mfp series
RM1-1379-000CNPC Board - Reversing unit intermediate PC board
RM1-0034-070CNPickup Assembly - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced
RM1-1060-030CNPickup Assembly - Paper pick up drive assembly
PF2282P025NIPlate - White backing plate assembly - Used as a white background for scanning documents when passing through the ADF assembly - Mounts on the underside of the ADF assembly towards the rear
PF2282P339NIPlate - ADF white plastic scanner background plate - Used as a white background during flatbed document scanning - Mounts on the underside of the ADF assembly (above the scanner assembly)
RM1-0043-010CNPlate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
RM1-0043-020CNPlate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
RM1-0043-050CNPlate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
5851-1885Plug - Fax port plug/cap - For the M527 printer series
8121-0564Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)
8121-0731Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only.
8121-0733Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark)
8121-0734Power Cord - Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand)
8121-0736Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 100V in Japan)
8121-0737Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa)
8121-0738Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland)
8121-0739Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.)
8121-0740Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan)
8121-0964Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand)
8121-1004Power Cord - Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel)
RM1-1013-000CNPower Supply - DC power supply - 110VACc RM1-1013 DC Power Supply - 110v - LJ 4345 / M4345 MFP series.
RM1-1013-020CNPower Supply - DC power supply - 110VACc RM1-1013 DC Power Supply - 110v - LJ 4345 / M4345 MFP series.
RM1-1013-050CNPower Supply - DC power supply - 110VACc RM1-1013 DC Power Supply - 110v - LJ 4345 / M4345 MFP series.
RM1-1014-050CNPower Supply - DC power supply - Printed circuit board (PCB) 220VAC
RM1-1014-060CNPower Supply - Low voltage power supply (LVPS)- For 220 VAC
RM1-1011-000CNRail - Cassette support rail - Left side Tray 2 support rail assembly
RM1-1012-000CNRail - Cassette support rail - Right side Tray 2 support rail assembly
CE796A-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RM1-1022-000CNReversing Unit - Reversing assembly - Reverses paper orientation of output tray
RC1-2830-000CNRod - Link rod - Connects to the toner cartridge drive gear mechanism
RC1-2902-000CNRod - Rod link for HP LaserJet Enterprise M4555h
RC1-2980-000CNRod - Switch rod - Metal rod that connects switch link to electrical switch on the engine power supply board
PF2282K039NIRoller - ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray)
Q7829-67925Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue)
RL1-0019-000CNRoller - Tray 1 pickup roller - D-shaped roller located under the envelope cover
RM1-0036-020CNRoller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
RM1-0037-020CNRoller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
030080FWWSNIScrew - M3 pan-head phillips screw with machine threads and captive washer - 8mm long
0515-4679Screw - M3 pan-head phillips screw with washer - 6mm long
IR4041P021NIScrew - M3 pan-head phillips screw with plastite threads - 8mm long
IR4041K105NISensor - Scanner open sensor assembly - Includes the housing, spring-loaded plunger, and two sensors - Detects when the ADF assembly is open and the optical assembly home position sensor
RK2-0359-000CNSensor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
RM1-0041-020CNSensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
RM1-1045-000CNSensor - Door sensor assembly - 500-sheet feeder assembly access door open sensor (SW501) switch assembly
RM1-1570-000CNSensor - Paper sensor - Reversing unit paper delivery sensor (PS109)
RM1-1571-000CNSensor - Paper sensor - Reversing unit paper jam sensor (PS111)
WG8-5624-000CNSensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
WG8-5849-000CNSensor - Duplex re-pick sensor - Detects the leading edge of the page
CE796A-Manual_LaserService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
Q3701-67902Service Parts - Modem PCA - HP LaserJet analog fax accessory 300
Q7815-67901Service Parts - Hebrew font usb solution
Q7815-67902Service Parts - Cyrillic font usb solution
Q7815-67903Service Parts - Greek font usb solution
Q7815-67904Service Parts - Arabic font usb solution
RC1-2856-000CNSupport - Cartridge support - Lower toner cartridge support - Located in upper plate assembly
RC1-2911-000CNSupport - Crossmember support - Plate on left side of upper plate assembly
RC1-3102-000CNSupport - Upper guide support block - Small L-shaped plastic block which supports the upper portion of the Reversing Mechanism
RL1-0436-000CNSupport - Damper support - Metal support bracket that attaches to printer chassis that supports bottom of gas damper
RM1-0043-000CNSwing - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
WC4-5139-000CNSwitch - Top cover interlock access switch
Q5968-67901Tray Assembly - LaserJet 4345 Optional 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of - 500-sheet paper feeder and tray/cassette
RM1-0940-000CNTray Assembly - Paper output tray - With pull out tray extension
Repair It
Exchange It
View Supplies
Service Manual