HP parts list for F1H96A HP OfficeJet 4650 All-in-One Printer
F1H96A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
F1H96A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
CB780-60032Accessory - REFTIT Officejet 8600 ADF Pre-scan refit adf rollers for scanning documents Pre-pick arm assembly adf roller kit ( for plus or premium order CM750-40107).
F1H96A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
F1H96A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
F1H96A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
F1H96A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
F1H96A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
F1H96A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
CM749-40056ADF Pad - ADF separation paper pad Officejet models MFP and compatible for scanning assembly adf pad kit ( for plus or premium order CM750-40025).
F1H96A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
F1H96A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
F1H96A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
F1H96A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
F1H96A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
F1H96A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
F1H96A-Belt_ADFBelt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
F1H96A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
F1H96A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
F1H96A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
F1H96A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
F1H96A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
F1H96A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
F1H96A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
F1H96A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
8120-8922Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary)
8121-1585Cable - Cable Assy Usb A-B 1.5-M-Lg Black Cable Premium USB A-B Printer Cable Cord For HP printers and other manufacturers.
CB780-60087Cable - EMEA Phonecord Adapter Kit 8-UK, DE
F1H96A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
F1H96A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
F1H96A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
F1H96A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
F1H96A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
F1H96A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
F1H96A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
F1H96A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
F1H96A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
E5Z02-30003Cartridge - Ink Crtg Bronze Sub Hp63/302/65/304iiblk
F1H96A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
F1H96A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
F1H96A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
F0V63-60003Control Panel - Control Panel HP Envy 4520 Front Control Panel Dash Display Screen 4512 4516
F0V63-60060Control Panel - HP OfficeJet 4650 HP OfficeJet 4652 HP OfficeJet 4655 Assy-Control_Panel
F0V63-60064Control Panel - HP OfficeJet 4650 HP OfficeJet 4652 HP OfficeJet 4655 Assy-Control_Panel
F1H96A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
F1H96A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
F1H96A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
F1H96A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
F1H96A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
F1H96A-DisplayDisplay - Status led display (LCD display assembly).
F1H96A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
F1H96A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
F1H96A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
F1H96A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
F1H96A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
F1H96A-EncoderEncoder - Encoder spring - provides tension for encoder strip
F1H96A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
F1H96A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
F1H96A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
F1H96A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
F1H96A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
F1H96A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
F1H96A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
F1H96A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
F1H96A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
F1H96A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
F1H96A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
F1H96A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
F1H96A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
F1H96A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
F1H96A-Hinge_CvrHinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
F1H96A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
F1H96A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
F1H96A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
F1H96A-Lid_Cover_AssyLid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.
F0V86-60030Motor - Assy - Motor With Harness, Paper
F1H96A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
F1H96A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
F1H96A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
F1H96A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
F1H96A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
F1H96A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
F1H96A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
F1H96A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
8120-6314Power Cord - Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South America, Switzerland, Denmark, Netherlands, and France)
8120-8699Power Cord - Power cord (Black) - 17 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle and EPSR symbol molded into plug (For 220VAC in Hong Kong & UK)
8121-0870Power Cord - Power cord (Black) - Two conductor, 1.8m (6.0 ft) long - Has straight (F) C7 receptacle (For 230-240VAC in Australia and New Zealand)
8121-1788Power Cord - CBL: Power Cord 1.5m UK, HK, Sing, ME
F1H96A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
F1H96A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
F1H96A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
F0V63-60012Power Supply - F0V63-60012 power supply adapter fits for hp Officejet 4650 4538 6230 4535 4678 Envy Photo models Officejet 8020 series 8012 Smart Tank all in one printers HP Tango models and many others.
F1H96A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
F1H96A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
F1H96-69001Product - SERVICE-UNIT-OFFICEJET-4650-AIO-EU;Click to order the functional equivalent: F1H96B
F1H96-69002Product - SERVICE-UNIT-OJ-INSTANT-INK-4650-AIO-EU;Click to order the functional equivalent: F1H96B
F1H96A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
F1H96A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
F1H96A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
F1H96A-Roller_ADFRoller ADF - Feeder ADF roller for picking up paper from ADF unit.
F1H96A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
F1H96A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
F1H96A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
F1H96A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
F1H96A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
F1H96A-Scanner_UnitScanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.
F1H96A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
F1H96A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
F1H96A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
F1H96A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
F1H96A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
F1H96A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
F1H96A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
F1H96A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
F1H96A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
F1H96A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
F1H96A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
F1H96A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
F1H96A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
F1H96A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
F1H96A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.
F1H96A-WindowWindow - Top/front access door assembly - print cartridge access door window.
Repair It
Exchange It
View Supplies
Service Manual
