XG9-0586-000CNBearing - Ball bearing - Located on the fixing one way gear assembly
Q3938-67965Belt - Image Transfer Kit 150K Intermediate transfer belt (ITB) assemblyIntermediate transfer belt (ITB) assembly
Q3938-68001Belt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages
RM1-3307-000CNBelt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 Transfer Kit prints approximately 150, 000 pages
RM1-3307-040CNBelt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRANSFER Kit prints approximately 150, 000 pages
RG5-1928-000CNCable - Registration cable assembly - Includes 7P and 3P connectors
RK2-1354-000CNCable - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RK2-1355-000CNCable - Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector
RK2-1356-000CNCable - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3617-000CNCable - Front cable - Connetcs the environment sensor, the delivery unit cooling fan, the cartridge front area cooling fan, and the VOC fan to the DC controler PC board
RC1-9336-000CNCover - Left cover assembly - Plastic cover that protects the left side of the printer
RC1-9339-000CNCover - Right upper cover - Located on top of the right door assembly
RC1-9340-000CNCover - Cover, face-down Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RC1-9341-000CNCover - Control panel support cover assembly - Includes the base structure, and control panel support piece - Mounts to the top of the ADF assembly - Does NOT include the control panel
RC1-9342-000CNCover - Rear upper cover - Plastic cover that protects the upper rear part of the printer
RC1-9344-000CNCover - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
RM1-4121-000CNDoor - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-3240-000CNDrawer - Intermediate transfer belt (ITB) drawer assembly
Q3931-67911Drive Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
Q3931-67912Drive Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
Q3931-67913Drive Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
CB458AFuser Assembly - Color LaserJet 220volt Fuser Kit Prints approximately 100, 000 pages.CP6015/CM6030/CM6040 220V Fuser Kit.
Q3931-67914Fuser Assembly - 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation.
Q3931-67915Fuser Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3931-67927Fuser Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
Q3931-67935Fuser Assembly - 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation.
Q3931-67936Fuser Assembly - Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
Q3931-67940Fuser Assembly - Hewlett Packard fuser assembly kit / 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation.
Q3931-67941Fuser Assembly - Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
FS6-0814-000CNGear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
FS6-0815-000CNGear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-0822-000CNGear - 16/33-tooth gear - Runs on the shaft located under the folding roller
FS6-0823-000CNGear - 16-tooth gear - Runs on the shaft located under the folding roller
FS6-0829-000CNGear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
FS6-0830-000CNGear - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
FU5-0428-000CNGear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FU5-0435-000CNGear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
FU5-0454-000CNGear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
FU5-0457-000CNGear - 17-tooth gear - Attaches to the rear tray side plate
FU5-2399-000CNGear - 29-tooth gear - Runs on the paper feeder motor assembly
RC1-8925-000CNGear - Damper gear - Mounts next to the fuser one way gear assembly
RM1-4108-000CNGuide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-4110-000CNGuide - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RM1-4131-000CNGuide - Upper delivery guide assembly - For the saddle assembly
RK2-1320-000CNMotor - Intermediate paper transfer unit (IPTU) media feed motor (M201)
RK2-1366-000CNMotor - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RK2-1370-000CNMotor - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
RM1-3286-000CNMotor - Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum
RM1-4518-000CNMotor - Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum
RM1-4519-000CNMotor - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
RL1-1213-000CNRail - Left top rail - For the 1 x 500-sheet paper input tray
RL1-1215-000CNRail - Right cassette rail - For the 1 x 500-sheet paper input tray
Q3932A-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RC1-8511-000CNRetainer - Retainer (C Type) for Color LaserJet CP6015n.
RM1-3652-000CNReversing Unit - Reversing assembly for duplexer assembly
RM1-3652-040CNReversing Unit - Reversing assembly for duplexer assemblyDUPLEXING REVERSE ASS Y Replaced: RM1-3652-000CN
CB459ARoller - 2nd transfer roller assembly - For the LaserJet CP6015 and CM6030/6040 series
Q3931-67919Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5
Q3931-67920Roller - Paper pick-up retard roller - Used for tray 1
Q3931-67938Roller - Paper pick-up roller assembly - Includes four paper pick-up rollers, and eight paper feed rollers - Use with tray 2,3,4, and 5
Q3938-67959Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
FH6-5100-000CNSolenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
FL2-0821-000CNSolenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
4S3-2116-000CNSpring - Tension spring - Provides tension to the front pressure plate (small spring)
4S3-2117-000CNSpring - Tension spring - Provides tension to the front pressure plate (big spring)
FB3-7980-000CNSpring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FC5-5005-000CNSpring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
FS6-2582-000CNSpring - Tension spring - Provides tension to the pressure plate assembly
RC1-9233-000CNSpring - Spring, leaf for HP HP Color LaserJet CP6015 Printer
RC1-9244-000CNSpring - Torsion spring - Provides torsion to the front fuser fan plate
RU5-2796-000CNSpring - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CNSpring - Tension spring - Provides tension to the scanner assembly
RU5-2825-000CNSpring - Torsion spring - Located on the back of the scanner assembly
FL2-0846-000CNStacker Assembly - Stapler unit - Located on the saddle stapler assembly
FM2-0721-000CNStacker Assembly - Staple assembly - For stapler/stacker and booklet-maker unit
FM2-0722-000CNStapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
4A3-1782-000CNStop - Lever stopper for HP Color LaserJet CM6030 MFP
FM2-0710-000CNSwitch - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
Repair It
Exchange It
View Supplies
Service Manual