WT2-5678-000CNClip - Cable clip - White plastic push-in clip with mounting pin
WT2-5812-000CNClip - Cable clip - `C` shaped white plastic clip
XD9-0232-000CNClip - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
VS1-7257-007CNConnector - Drawer connector - Connector located on top of tray assembly frame (right side) which connects tray assemblies to each other
RC1-4060-000CNContact - Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge
RM1-4054-000CNContact - Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control.
RM1-3725-000CNControl Panel - Control panel assembly - Includes the display mounted on the right top side of the printer
RM1-3723-000CNCover - Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions.
RM1-3724-000CNCover - Rear cover assembly - Includes rear door assembly
RM1-3722-000CNDoor - Cartridge access door assembly - Provides access to the cartridges
0950-4753Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height
5851-0673Drive Assembly - Kit-Hard Disk Drive replacement
5851-3833Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935.
J7989GDrive Assembly - Hard drive - High performance EIO serial ATA hard drive.EIO hard disk - Can be installed in printers with EIO slots - Provides mass storate capability for downloading fonts and macros - May also hold print jobs.
Q7829-67935Drive Assembly - Hard drive kit - 40G hard drive with PATA (Parallel ATA) connector. For SATA (serial hard drive) order 5851-3833.
RM1-3712-000CNDrive Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.
RC1-4128-020CNDuct - Plastic duct that vents air from the lower right front fan to the laser/scanner.
RC2-0590-000CNDuct - Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area.
RK2-1497-000CNFan - Cooling fan - Located on the right side of the printer.
RK2-1499-000CNFan - Cooling fan (FM2) - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area
RM1-3759-000CNFeeder - Lower paper feed assembly - Vertical transfer unit - Transfers paper from pickup assembly up to the printer input.
92296TFilm - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series
92296UFilm - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP
RC1-4027-000CNFlag - Sensor lever - Top of page sensor flag - Used to detect edge of paper
RM1-3742-000CNFlag - Face down full detect flag assembly - Goes on the right side of the top cover assembly
RM1-3743-000CNFlag - Face down flag assembly - Goes on the top cover assembly
RM1-3769-000CNFlag - Sensor flag assembly for tray 2 - Short rod with one flag on it - Mounts next to the pickup roller assembly
RA0-1003-000CNFoot - Rubber foot - For bottom of printer - Three used
5851-3996Fuser Assembly - Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
RM1-3717-000CNFuser Assembly - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
RM1-3717-020CNFuser Assembly - Fuser assembly - For 110 VAC - Bonds toner to paper with heat
RM1-3740-000CNFuser Assembly - Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation
RM1-3740-030CNFuser Assembly - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
RM1-3741-000CNFuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC, 50Hz operation - Bonds toner to paper by heat
RM1-3741-030CNFuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
RM1-3761-000cnFuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear
RM1-3761-020CNFuser Assembly - Fuser assembly - For 220 VAC - Bonds toner to paper with heat
CB414-67923Gear - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
RC2-0657-000CNGear - Fuser thrust stopper - Located on the fuser drive assembly.
RM1-3714-000CNGear - Gear - Pick up roller gear assembly
RA0-1172-000CNGear Assembly - 17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic lever/bracket
RM1-3746-000CNGear Assembly - Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer
RM1-3748-000CNGear Assembly - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability.
RC1-4085-000CNGround - Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply
RC2-0588-000CNHolder - Cable holder - Mounts on the main drive assembly.
RC2-0592-000CNHolder - Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.
RC2-0595-000CNHolder - Holder - Plastic assembly that holds interlock switch for cover.
RC2-0622-000CNHolder - Fan holder - Chassis left fan holder
RC2-0632-000CNHolder - Switch holder - Holds the power on/off switch.
RC2-0634-000CNHolder - Link switch holder - Plastic guide that holds power link arm in place.
RM1-1521-030CNLaser Scanner - Laser/Scanner assembly - Mounts on top of print structure
RC1-3939-000CNLever - Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor
RC1-4065-000CNLever - Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed
RC1-4066-020CNLever - Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
RK2-1488-000CNMotor - Main motor (M1) - DC motor located on the inner left side of the printer
RK2-1489-000CNMotor - Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly
RC1-0939-000CNPad - Separation pad assembly for the Tray 1 position and fits in a holder that sits just below the Tray 1 paper pickup roller.
RM1-3738-000CNPad - Tray 1 and 2 separation pad and holder assembly.
C4179BPaper - Soft gloss Color LaserJet paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
HPC3HPPaper - Paper for DeskJet 5540 Series, DeskJet 5440 Series, DeskJet 450 Series, DeskJet 6620 Series
HPC8511Paper - HP Office Paper - A size (8.5 x 11-inches) - 10 reams
HPC8514Paper - HP Office Paper - Legal size (8.5 x 14 inches) - 10 reams
HPE1120Paper - HP Office Recycled Paper - A size (8.5 x 11-inches) - 10 reams
HPJ1124Paper - HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets
HPJ1424Paper - HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets
HPM1120Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets
HPM113HPaper - HP Multipurpose Paper - A size (8.5 x 11-inches), 3 hole - 500 sheets
HPM115RPaper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams
HPM1420Paper - HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets
HPP1122Paper - HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets
HPU1132Paper - HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets
HPU1732Paper - HP Premium Choice LaserJet Paper - Tabloid size (11 x 17-inches) - 250 sheets per package
Q1298APaper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298BPaper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
Q6541APaper - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets
Q6543APaper - Paper (Matte) for Color LaserJet 4700, LaserJet 1320t Printer, LaserJet P3xxx Printer, Color LaserJet 2605 Printer
Q6549APaper - Paper (Matte) for Color LaserJet 5500 Series, Color LaserJet 9500 Series, Color LaserJet 1600 Printer, Color LaserJet CM1015 MFP
Q7847-60001PC Board - FORMATTER BASE/D non net work. (for net work board see Q7848-xxx)
Q7847-61002PC Board - Formatter (main logic) board - For HP LaserJet P3005 series non net work. (for net work board see Q7848-xxx)
Q7847-61003PC Board - Formatter (main logic) board - For HP LaserJet P3005 series only non net work. (for net work board see Q7848-xxx)
Q7847-61004PC Board - Replacement for part Q7847-61003 LJ P3005N PCA 02.039.3 non net work. (for net work board see Q7848-xxx)
Q7847-61006PC Board - Formatter (main logic) PC board - For HP LaserJet P3005 series only,non network. (for network board, see Q7848-xxx).
Q7848-60002PC Board - Formatter (main logic) board - For HP LaserJet P3005 Series. with network. (non network - is Q7847-xxx)
Q7848-60012PC Board - FORMATTER N/DN/X with network. (non network - is q7847-xxx)
Q7848-61002PC Board - FORMATTER N/DN/X Formatter (main logic) board - For HP LaserJet P3005 series with network. (non network - is Q7847-xxx)
Q7848-61003PC Board - Formatter (main logic) board - For HP LaserJet P3005 series with network. (non network - is Q7847-xxx)
Q7848-61004PC Board - Formatter (main logic) board - For HP LaserJet P3005 Series. with network. (non network - is Q7847-xxx)
Q7848-61006PC Board - Formatter (main logic) board - For HP LaserJet P3005 series with network. (for non-network board, see Q7847-xxx).
RM1-3730-000CNPC Board - Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC
RM1-3730-060CNPC Board - Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
RM1-3731-000CNPC Board - PC Board : Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC
RM1-3731-060CNPC Board - Engine controller assy, Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation
J7934GPC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
J7942APC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
J7942GPC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
J7951GPC Board Interface - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software
J7960GPC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port
J7961GPC Board Interface - HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM;Click to order the functional equivalent: J7961-69011
5851-4012Pickup Assembly - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
5851-4013Pickup Assembly - Paper pick-up roller assembly - For tray cassette 2 and 3 - Include separation pad for tray 2 and 3
RM1-3762-000CNPickup Assembly - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
RM2-3900-000CNPickup Assembly - Kit-Cassette Paper Pick-up Roller assbly
Q7816A-Repair_LaserJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RC2-0593-000CNRod - Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.
RC1-3994-000CNRoller - Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used
RM1-3716-000CNRoller - Roller Assembly : Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin.
RM1-3749-000CNRoller - Face-down output roller assembly - Black roller shaft with four soft rollers.
WG8-5624-000CNSensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
RC1-4140-000CNSpring - Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed
RC2-0576-000CNSpring - Torsion spring - Provides tension to the arm paper.
RC2-0665-000CNSpring - Torsion spring - Tiny spring that attaches the face down roller.
RU5-2385-000CNSpring - Compression spring - Provides pressure for Tray 1 seperation pad
RU5-2386-000CNSpring - Torsion spring - Provides tension for Tray 1 paper sensor flag
RU5-2388-000CNSpring - Tension spring - Provides tension for white plastic arm on left side of cartridge access door
RU5-2401-000CNSpring - Compression spring - Provides pressure for the large 201 tooth white gear on right side of printer
RU5-2403-000CNSpring - Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted
RU5-2404-000CNSpring - Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly
RU5-2405-000CNSpring - Compression spring - Provides pressure for E-reader holder
RU5-2407-000CNSpring - Tension spring - Provides tension for cartridge access door arm
RU5-2408-000CNSpring - Compression spring - Right side transfer roller spring - Provides tension for transfer roller
RU5-2410-020CNSpring - Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
RU5-2920-000CNSpring - Compression spring - Goes on the pendulum assembly
RC2-0702-000CNStop - Right cartridge stopper - Provided a predetermined position for the cartridge.
RC2-0707-000CNStop - Left cartridge stopper - Provided a predetermined position for the cartridge
RK2-0534-000CNSwitch - Microswitch - Door open switch - SW501
RM1-3732-000CNTray - 500-sheet input tray - Paper cassette for tray 2. (RM1-3796-000CN is tray# 3)
RM1-3796-000CNTray - 500-sheet input tray - Paper cassette for tray 3. (RM1-3732-000CN is tray# 2)
Q7817-67901Tray Assembly - Optional 500-sheet paper input tray feeder assembly - Includes the paper feeder base assembly and 500-sheet paper cassette tray 3 - Holds Letter, A4, Legal, A5, B5 (JIS), Executive, and 8.5 x 13 paper sizes.
Q7817ATray Assembly - 500-sheet input tray - Paper cassette for tray 2
RM1-1490-000CNTray Assembly - MP/Tray 1 support assembly - Hinged support and adjustable paper width guide assembly - Tray 1 cover assembly attaches to this assembly
RC2-0652-000CNWasher - Plain Washer - Located on the pendulum assembly
Repair It
Exchange It
View Supplies
Service Manual