Information for: 92215S

• PartDescription
• 17255DRS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
• 17302ARS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
• 24540-80010Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
• 24542GRS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• 4H1-1080-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 4H1-6581-000CNLow voltage power supply cable - Connects between the power supply and the DC controller PC board
• 4H1-6582-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 5063-1254IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
• 5063-1255IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 5183-2691Ethernet Cable 50 ft. C Ethernet Cable 50 ft. CAT5 RJ
• 8120-8749IEEE 1394 (FireWire) cable with two ferrites - 6-pin to 6-pin - 1.9m (6.3ft) long
• 8121-0868Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
• 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
• A6144-63008RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• C2145-60025Power cable - Has two 9-pin (F) connectors - 3.4cm (1.3in) long
• C2145-60032Carriage assembly flex cable - Overall length is 46.7cm (18.4in)
• C2392AUniversal serial bus (USB) interface cable - Type `A` connector to type `B` connector - 5.0m (16ft) long
• C2913ARS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
• C2932ARS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
• C2933ARS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long
• C2946A8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
• C2947AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
• C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• C2990AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
• C2991AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
• C4555-60061Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
• C4704-60015Carriage board trailing cable with ferrite - Three ribbon cables bundled together - 1.9m (6.3ft) long, 36 inches.
• C4704-60021Hard drive power cable - Has 4-pin (F) connectors - 47.6cm (18.8in) long
• C4704-60022Ribbon cable for one IDE drive - Has 40-pin (F) connectors - 31.8cm (12.5in) long
• C4704-60024Ribbon cable assembly - Has 28-pin (F) connectors - 23.5cm (9.3in) long
• C4704-60025Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.3m (4.1ft) long
• C4723-60025Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.7m (5.6ft) long
• C4723-60237Carriage assembly trailing cable - Three ribbon cables bundled together - 2.4m (7.7ft) long, 54 inches.
• C4781-60504Multi-Bin mailbox interface C-link cable - 45cm (17.7-in) long
• C4785-60530Multi-Bin mailbox interface cable - 1.8m (5.8ft) long
• C4787-60507Stapler unit C-link cable - Has two high density 15-pin (M) connectors - 91.4cm (36in) long
• C6518AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
• C6520AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long
• C8085-60515Flipper and paper path ribbon cable
• C8085-60517Jet-link cable and power cord assembly
• FB4-0740-000CNFront scanner cable - Moves mirror assembly
• FB4-0741-000CNRear scanner cable - Moves mirror assembly
• FC1-5051-000CNCable for Color LaserJet 8550 Series
• FC1-5052-000CNRear lifting cable for HCI paper tray
• FG2-9539-000CNInterface R-P cable - Between video interface board and reader controller board
• FG2-9558-000CNCable assembly - Large 14-pin (M) and 4-pin (F) connector to a grounding wire with a ring terminal, a 7-pin (F) connector, a 4-pin (F) connector, and a 2-pin (F) connector - Overall length is 71.1cm (28in)
• PA03002-C125FJFront panel cable - Between front panel and junction PCA
• PA03002-C203FJDC cable - From power supply to copier logic board
• PA03002-C204FJCarrier flex cable - From carrier unit to junction PCA
• PA03002-C228FJSensor cable - Connects ADF sensors to copier control board
• PA03002-C229FJCCD cable - From control PCA to CCD PCA on optical unit
• RG1-3529-000CNSensor cable - From controller PCA to photo sensor PS1
• RG5-0519-000CNCable assembly for HP LaserJet 4 Series
• RG5-0520-000CNCable assembly - From DC controller to scanner assembly
• RG5-0521-000CNCable assembly for HP LaserJet 4 Series
• RG5-0522-000CNCable assembly - From DC controller to delivery sensor (PS3)
• RG5-0524-000CNCable assembly - From DC controller to paper control board
• RG5-0526-000CNCable assembly - From DC controller to AC power supply
• RG5-0529-000CNCable assembly for HP LaserJet 4
• RG5-0530-000CNCable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly
• RG5-0538-000CNCable assembly - From DC controller to main motor
• RG5-0556-000CNCable assembly - From DC controller to laser assembly
• RG5-0766-030CNScanner connector assembly - Scanner to DC controller board
• RG5-0975-000CNCable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector
• RG5-0976-000CNCable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long
• RG5-0978-000CNCable assembly - From DC controller to main motor
• RG5-0979-000CNCable assembly for HP LaserJet 5se Series
• RG5-0980-000CNCable assembly - From DC controller to delivery sensor (PS3)
• RG5-0982-000CNCable assembly for HP LaserJet 4M Plus Series
• RG5-1804-000CNCable assembly for HP LaserJet 5P Series
• RG5-1843-000CNPaper sensor cable - J11 to J15
• RG5-1849-000CNCable assembly - Fuser cable 1 - J50/51 to J10/56/222
• RG5-1850-000CNDuplexer cable assembly - From duplexer to DC controller
• RG5-1859-000CNSensor cable - PIU PS2 sensor cable - J13 to J1205
• RG5-1861-000CNCable assembly - 20-pin (F) connector on each end - 39.4cm (15.5in) long
• RG5-1919-000CNCable assembly - From DC controller board to main motor
• RG5-1920-000CNCassette size sensor cable - Between cassette size sensor PCA's and formatter board
• RG5-1921-000CNFan cable - Fan 3 power cable
• RG5-1924-000CNDual cable assembly with ferrites - 10-pin (F) connector, 9-pin (F) connector, and two 6-pin (F) connectors - 1.1m (3.7ft) long
• RG5-1925-000CNCable assembly - 5-pin (F) connector to both a 27cm (10.6in) cable with a 3-pin (M) connector and a 27.2cm (10.7in) cable with a 2-pin (M) connector
• RG5-1926-000CNBD cable - J18 to J2007
• RG5-1927-000CNILS cable - From J1401 to J221/J205
• RG5-1928-000CNRegistration cable assembly - Includes 7P and 3P connectors
• RG5-3097-000CNMain cable (large)
• RG5-3104-000CNCable assembly for HP Color LaserJet 8550 Series
• RG5-3144-000CNCable assembly for HP Color LaserJet 8550 Series
• RG5-3147-000CNCable assembly for HP Color LaserJet 8550 Series
• RG5-3523-000CNCable assembly for HP LaserJet 5000 Series
• RG5-3554-000CNFace down bin full cable
• RG5-3557-000CNCable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector
• RG5-3558-000CNTop of page sensor cable
• RG5-3561-000CNHP Cable for LaserJets, fuser cable.
• RG5-3562-000CNCable assembly - A 22-pin (F) connector to many cables: 32.4cm (12.8in) with 8-pin (F) connector, 34.9cm (13.8in) with 7-pin (F) connector, 40.3cm (15.9in) with 4-pin (F) connector, and 66.4cm (26.1in) with 3-pin (F) connector
• RG5-3700-000CNCable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long
• RG5-3703-000CNCable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector
• RG5-3704-000CNEnvelope feeder connector and cable
• RG5-3705-000CNCable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector
• RG5-3706-000CNFeed/registration sensor assembly cable
• RG5-3708-000CNCable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector
• RG5-3709-000CNMain motor cable
• RG5-3710-000CNPaper feeder module cable
• RG5-3711-000CNOptical sensor cable
• RG5-3781-000CNCable assembly for HP Color LaserJet 4500 Series
• RG5-3782-000CNCable assembly - 3-pin (F) connectors on each end - 5.5cm (2.2in) long
• RG5-3783-000CNCable assembly for HP Color LaserJet 4500 Series
• RG5-3785-000CNPaper feed cable
• RG5-3786-000CNCable assembly - A 14-pin (F) connector to both an 8-pin (F) connector and a 7-pin (F) connector - 16.3cm (6.4in) long
• RG5-3787-000CNDual cable assembly - One cable is a large 12-pin (F) connector to a grounding wire with a ring terminal and a 5-pin (F) connector - Other cable has four connectors: a 14-pin (F), two 8-pin (F), and a 7-pin (F) - Overall length is 39.4cm (15.5in)
• RG5-3795-000CNRotary cable - From DC controller to carousel sensors
• RG5-3802-000CNControl panel cable
• RG5-3822-000CNPaper feeder cable
• RG5-3876-000CNCable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long
• RG5-3886-000CNFuser sensor cable - From fuser sensors to DC controller
• RG5-3887-000CNFan power cable
• RG5-3909-000CNPower supply cable - Between power supply and controller PCA
• RG5-3919-000CNMain cable - Largest cable in C4781A
• RG5-3921-000CNDC power cable - From main power supply - J201 to J103
• RG5-3922-000CNCable assembly for HP Color LaserJet 8550 Series
• RG5-3923-000CNCarousel cable - Carousel to DC controller
• RG5-3942-000CNMain motor cable - DC controller to motor M4
• RG5-4213-000CNCable assembly with ferrite - A large 14-pin (F) connector to a small 11-pin (F) connector - 10.0cm 3.9in long (please purchase C4115A).
• RG5-4254-000CNMulti-purpose input tray sensor cable - Right side
• RG5-4255-000CNCable assembly for HP LaserJet 2100 Series
• RG5-4262-000CNCable assembly for HP LaserJet 2100 Series
• RG5-4263-000CNCable assembly for HP LaserJet 2100 Series
• RG5-4278-000CNSensor cable for HP LaserJet 2100 Series
• RG5-4280-000CNRelay cable - One connector to two connectors - Six wires
• RG5-4281-000CNFrame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire
• RG5-4377-000CNCable assembly - An 11-pin (F) connector, a 10-pin (F) connector, and two 7-pin (F) connectors - 1.1m (3.7ft) long
• RG5-4378-000CNCable assembly with ferrites - Has many connectors: a 14-pin (F), an 11-pin (F), two 7-pin (F), a 5-pin (F), two 4-pin (F), and two 3-pin (F) - 85.6cm (33.7in) long
• RG5-4381-000CNCable assembly - 18-pin (F) connector to 25.4cm (10in) grounding wire with ring terminal, 35.7cm (14in) cable with 4-pin (F) connector, 53.3cm (21in) cable with 1-pin (F) connector, and 86.4cm (34in) cable with 4-pin (F) connector
• RG5-4386-000CNCable assembly - From DC controller board to main motor
• RG5-4439-000CNFeeder Cable for HP 09998390001
• RG5-4440-000CNMain cable on input assembly
• RG5-4650-000CNCable assembly with ferrite - Large 4-pin (M) connector to small 4-pin (F) connector - 34.9cm (13.8in) long
• RG5-4651-000CNCable assembly for HP Color LaserJet 4550
• RG5-4726-000CNCable assembly for HP LaserJet 8000 Series
• RG5-5186-000CNMain cable assembly
• RG5-5187-000CNCable assembly for HP Color LaserJet 4550 Series
• RG5-5195-000CNCable assembly with ferrites - Has two 7-pin (F) connectors - 20.0cm (7.9in) long
• RG5-5679-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5722-000CNMain cable harness and holder assembly
• RG5-5722-030CNMain cable harness and holder assembly
• RG5-5723-000CNUpper cable guide assembly
• RG5-5725-000CNOrder Rg5-5725-030cn
• RG5-5725-030CNFan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board
• RG5-5759-000CNFan connecting cable - For both Fan 1 and 2
• RG5-5763-000CNCable assembly for HP LaserJet 9040 9050 Series
• RG5-5764-000CNCable assembly - Grounding cable for tray 1
• RG5-5770-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5771-000CNCable assembly for HP LaserJet 9000 Series
• RG5-5772-000CNFuser Assembly high voltage cable and connectors
• RG5-6240-000CNJetlink connector socket and cable
• RG5-6240-020CNJetlink connector socket and cable
• RG5-6249-000CNJetlink connector grounding cable
• RG5-6413-000CNLeft plate cable
• RG5-6414-000CNRelay cable - Connects DC controller to HVPS, interlock switch to DC controller, and Fuser circuit to DC controller
• RG5-6415-000CNDC Cable - DC power supply cable
• RG5-6418-000CNAntenna cable - Between toner cartridge memory tag and antenna memory PC board - Four used
• RG5-6419-000CNPaper feeder main cable
• RG5-6422-000CNIntraface cable - Connects Formatter board to DC controller board and LVPS to Formatter board
• RG5-6423-000CNSensor cable - Cable for PS12 fuser delivery and PS13 output bin full
• RG5-6425-000CNFuser drawer fusing cable
• RG5-6427-000CNAC Cable - Connects AC power supply to fuser power supply - 110 volt AC
• RG5-6430-000CNOptional feeder and cassette size cable/connector
• RG5-6431-000CNCable - Cassette size cable
• RG5-6434-000CNAC Cable - Connects AC power supply to fuser power supply - 220 volt AC
• RG5-6734-000CNFuser drawer fusing cable and connector assembly - Includes conncector mount
• RG5-6815-000CNAC cable - Low voltage power supply (LVPS) to fuser power supply cable
• RG5-6816-000CNDC cable - From DC power supply to low voltage power supply (LVPS)
• RG5-6818-000CNDrum drive cable - From DC controller board to each drum drive assembly
• RG5-6820-000CNFan cable - Connects fans FM2 and FM3 to DC Controller PC board
• RG5-6820-030CNFan cable - Connects fans FM2 and FM3 to DC Controller PC board
• RG5-6821-000CNPaper size cable - From Tray 2 paper width and paper length sensors to DC controller board
• RG5-6821-020CNPaper size cable - From Tray 2 paper width and paper length sensors to DC controller board
• RG5-6826-000CNDC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB)
• RG5-6826-040CNDC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB)
• RG5-6827-000CNFuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors
• RG5-6827-020CNFuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors
• RG5-6829-000CNPaper pickup assembly cable - From DC Controller board to paper pickup assembly
• RG5-6829-020CNPaper pickup assembly cable - From DC Controller board to paper pickup assembly
• RG5-6836-000CNOptional feeder cable - Tray 3/500 sheet tray to DC Controller board
• RG5-6836-030CNOptional feeder cable - Tray 3 - 500 sheet tray to DC Controller board
• RG5-7073-000CNCable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector
• RG5-7471-000CNEnvironment/humidity sensor cable - From environment/humidity sensor to DC controller board
• RG5-7686-000CNEnvironmental sensor cable - Temperature sensor cable
• RG5-7686-020CNEnvironmental sensor cable - Temperature sensor cable
• RG5-7687-000CNUpper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors
• RG5-7687-020CNUpper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors
• RG5-7727-000CNFuser drawer fusing cable and connector assembly - Includes conncector mount
• RG5-7727-030CNFuser drawer fusing cable and connector assembly - Includes conncector mount
• RG5-7783-000CNFan connecting cable - Mounts on the rear of the printer
• RG5-7786-000CNFan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board
• RG5-7787-000CNUpper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer
• RG5-8021-000CNCable assembly for HP LaserJet 9040 9050 Series
• RG5-8025-000CNCable assembly - Fuser power cable
• RG5-8034-000CNFusing assembly high voltage cable and connectors
• RG5-8038-000CNMulti-purpose/tray 1 cable assembly
• RH2-5259-000CNCable - From DC controller/power supply board to small connector board
• RH2-5335-000CNRibbon cable - Has two 32-pin (M) edge connectors - 3.7cm (1.5in) long
• RH2-5337-000CNRibbon cable - Has two 40-pin (M) edge connectors - 1.4cm (0.6in) long
• RH2-5338-000CNRibbon cable - From paper PCA to controller PCA
• RH2-5348-000CNCable assembly for HP LaserJet 2100 Series
• RH2-5350-000CNFlat cable (White)
• RH2-5400-000CNLaser cable - Flat ribbon cable
• RH2-5445-000CNHigh voltage power supply ribbon cable
• RH2-5471-000CNFlat cable - Connects formatter board to DC controller board
• RH2-5511-000CNFlat cable - From DC Controller to
• RM1-1628-000CNMotor cable - From DC Controller to all four drum motor assemblies
• RM1-1629-000CNSensor cable assembly
• RM1-1633-000CNPaper pickup cable - From DC Controller to several connections in paper pickup area including paper size sensors
• RM1-1638-000CNSensor cable - From DC Controller board to sensors SR1, SR2 and SR3
• RM1-1640-000CNControl panel cable
• RM1-1644-000CNSensor cable - Between DC Controller board and disengaging drive sensor
• RM1-1646-000CNFan cable assembly - From DC Controller board to Fans 1 through 4
• RM1-1653-000CNMemory contact cable - Connects to e-label sensors
• RS971AAHP USB 2.0 Interface Cable - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long