Information for: CH971-90811

• PartDescription
• 0601310-012Screw Pph Sems M4 0.7 Pitch St
• 0901491Order Ch971-91491
• 0901598Order Ch971-91598
• 0970811Carriage drive motor - For Scitex printers
• 0971064Valve - Used to switch on or off the flow of ink, air or cleaning solution (the color of the wiring on this generic valve may not match the wiring color of the valve being replaced, however, they are interchangeable)
• 970811Frm Mtr Carrdrv Sfemxabcdhij R
• 971064Frm Valve Generic Abcdhij Rohs
• CH108-67016Kit Lintfree Cloth 12 Cnt
• CH154-60013Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer
• CH154-67001Complete trolley assembly - Includes upper and lower plates - For use with Scitex FB950 printers
• CH154-67013Light-blocking skirt - Used for the main cover - For use with Scitex FB950 printer
• CH154-67034Track assembly - For use with the Scitex FB950 printer
• CH154-67043ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer - When installing this part on some vintages, a power cable (included) must be replaced
• CH238AKit Lintfree Cloth 12 Cnt
• CH971-55392Assy Vacuum Switch Gator Ink D
• CH971-62374Tube Tygon R-3603 0.0625 Id
• CH971-62385Tube Tygon 2075 0.25 Id 0.375
• CH971-62414Fitting Male Luer Lock Ring 1/
• CH971-62547Luer fitting (White) - 1/8-inch, male-taper - Used on the ink tubing
• CH971-62550Luer fitting (White) - 3/32-inch, male-taper - Used on the ink tubing
• CH971-62678Latch Draw Spring Loaded
• CH971-91064Valve - Used to switch on or off the flow of ink, air or cleaning solution (the color of the wiring on this generic valve may not match the wiring color of the valve being replaced, however, they are interchangeable)
• CH971-91219Frm Air Filter 1.0 Micron Bhil
• CH971-91302Frm Chimney Fan Bhil Rohs
• CH971-91414Side alignment fence - Attached to belt assembly
• CH971-91491Manifold assembly - Includes six valves that mounts on the rear of the carriage above the trolley
• CH971-91531ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer
• CH971-91534Frm Sw Media Adv Fmxabcdhijn
• CH971-91544Ink pump - Includes the tubing, fitting, and torx fasteners for installation
• CH971-91598ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer
• CH976-00148Check valve assembly (White) - Used in the Off-Head Supply (OHS) - Color-coded for Light Cyan
• CH976-00149Check valve assembly (Black) - Used in the Off-Head Supply (OHS) - Color-coded for Black
• CH976-00150Check valve assembly (Red) - Used in the Off-Head Supply (OHS) - Color-coded for Magenta
• CH976-00151Check valve assembly (Green) - Used in the Off-Head Supply (OHS) - Color-coded for Light Magenta
• CH976-00152Check valve assembly (Blue) - Used in the Off-Head Supply (OHS) - Color-coded for Cyan
• CH976-00153Check valve assembly (Yellow) - Used in the Off-Head Supply (OHS) - Color-coded for Yellow
• CH980-00219Nut Hex Metric Keps M6 Blck Ro
• CJ860ACabling loom (conduit and cables) - Used between the electronics assembly and devices on the service end of the printer
• CJ861ACabling loom (conduit and cables) - Used between the electronics assembly and devices on the user end of the printer (excluding devices in the user-end removable enclosure)
• CJ862ACabling loom (conduit and cables) - Used between the electronics assembly and devices in the user-end removable enclosure
• CK704AHp Videonet Adapter
• CQ114-67014Trolley assembly (upper and lower plates) - For the Scitex FB500/FB700 printer
• CQ114-67015Upper trolley plate with wheels - For the Scitex FB500/FB700 printer
• CQ114-67024Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the service end of the printer - Only the loom bundle is available, the individual cables are not orderable - For the Scitex FB500 printer
• CQ114-67025Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the user end of the printer excluding devices in the user-end removable enclosure - For the Scitex FB500 printer
• CQ114-67026Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly and components in the user-end removable enclosure and to the OHS board - For the Scitex FB500/FB700 printer
• CQ114-67073Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer
• CQ114-67085Drain hose - Runs from the elbow fitting on the service station basin to the spigot on the printer enclosure - For the Scitex FB500/FB700 printer
• CQ114-67089ShopVac for the service station - For the Scitex FB500/FB700 printer
• CQ114-67092Light-blocking skirt - Used on the main cover - For the Scitex FB500 printer
• CQ114-67096White-ink homogenizer (shaker) assembly - Mounts on the ink rack - For the Scitex FB500/FB700 printer
• CQ114-67133Metal transition piece - Attached to the input and output tables to bridge from the table to the printer belt
• CQ114-67142Complete standard output table assembly - For the Scitex FB500 printer
• CQ114-67143Table top assembly - For the output and accessory tables - For the Scitex FB500 printer
• CQ114-67158Media collet assembly - The collet is for 3-inch cardboard cores only - This is a single media collet used on the media spools in the roll-to-roll accessory - Two collets are used per spool - For the Scitex FB500 printer
• CQ114-67169Light-trapping louvre assembly - Found in the light-blocking tray on the user end of the printer - For the Scitex FB500/FB700 printers
• CQ114-67213Complete track (Igus) assembly - Includes all tubes, cables, and related hardware - For the Scitex FB500 printers
• CQ114-67239Frm,Fb500,Full_Igus,Alt2
• CQ115-67015Replacement light-blocking skirt - for the main cover - For the Scitex FB700 printers
• CQ115-67027Media spool - For the roll-to-roll accessory - This is the spool only, no media collets - For the Scitex FB700 printers
• CQ115-67038Complete standard output table assembly - For the Scitex FB700 printers
• CQ115-67039Complete standard input table assembly - For the Scitex FB700 printers
• CQ115-67053Complete track (Igus) assembly - Includes all tubes, cables, and related hardware - For the Scitex FB700 only
• CR774-67021Media Edge Holders kit rev3