Information for: RM1-2624-000CN

• PartDescription
• 8121-0868Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
• C6518AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
• C6520AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long
• RK2-0966-000CNScanner cable - Long flat scanner cable
• RK2-0967-000CNScanner cable - Short flat scanner cable
• RK2-0969-000CNFlat cable - Ribbon cable that connects the DC controller board to the Driver board - Flat drive cable 1 - Connector J1023 to J401
• RK2-0970-000CNFlat cable - Ribbon cable that connects the DC controller board to the Driver board - Flat drive cable 2 - Connector J1022 to J201
• RK2-0971-000CNScanner cable - Long flat scanner cable
• RM1-2587-000CNControl panel cable - Connects control panel to Low Voltage power supply
• RM1-2589-000CNMedia sensor cable - Cable between Tray 2 media type sensor and Relay PCA
• RM1-2592-000CNPower control cable - Connects DC Controller board to Low Voltage power supply
• RM1-2594-000CNScanner cable - Cable between scanner motors and DC controller PCA
• RM1-2595-000CNTemperature sensor cable - Connects environment sensor to DC controller board
• RM1-2596-000CNControl panel cable - From control panel to High Voltage Power Supply (HVPS)
• RM1-2597-000CNFuser cable - Connects Fuser to DC controller and Low Voltage power supply
• RM1-2603-000CNSensor cable - Senses when the Electrostatic Transfer Belt (ETB) is locked in place - This is the ETB's electrical connection with the rest of the printer
• RM1-2605-000CNDriver cable - From DC Controller board to Driver board
• RM1-2608-000CNElectrostatic Transfer Belt (ETB) cable - Connects Driver PC board to ETB
• RM1-2609-000CNDuplex docking cable - This cable goes from the top cover and duplex motors down to the driver PC board
• RM1-2610-000CNDrum motor cable - Connects cartridge drive motors M6 and M7 to Driver PCA
• RM1-2611-000CNSolenoid and motor cable - Connects CST pickup and MP Tray pickup solenoids to Driver PCA - Also connects feed motor M4 to Driver PCA
• RM1-2613-000CNCassette feeder cable - Connects Driver PCA to 500 sheet paper feeder PCA
• RM1-2614-000CNDrum motor cable - Connects cartridge drive motors M8 and M9 to Driver PCA - For Color LaserJet 3600/3800/Cp3505 series
• RM1-2616-000CNDuplexing cable - From Duplex board to Driver board, Duplex feed motor and Duplex fan connector
• RM1-2617-000CNDuplexing cable - This cable connects Duplexing PCA to the main cabling from the top cover down to DC Controller PCA and Formatter PCA
• RM1-2618-000CNDuplex sensor cable - Connects Duplex board to duplexer switchback paper sensor SR823
• RM1-2619-000CNFuser drive cable - Connects Driver board to Fuser drive motor (M1) and Fuser pressure release sensor
• RM1-2620-000CNPaper sensor cable - Cable that connects to the face down paper tray full sensor SR706 - For Color LaserJet 3000/3600/3800 series duplex printers
• RM1-2625-000CNPaper sensor cable - Connects paper sensor in front section of 500 sheet tray to 500 Sheet Paper Feeder PC board
• RM1-2627-000CNE-label or memory tag cable
• RM1-2628-000CNPaper full cable - From Driver PCA to connector J821
• RM1-2629-000CNDrum motor cable - Connects cartridge drive motors M8 and M9 to Driver PCA - For Color LaserJet 3000 only
• RM1-2630-000CNPaper sensor cable - Cable that connects to the face down paper tray full sensor SR706 - For Color LaserJet 3000/3600/3800 series simlex printers
• RS971AAHP USB 2.0 Interface Cable - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long