Information for: XA9-1495-000CN

• PartDescription
• 030040FNITNIScrew - used to secure flatbed scanner slide rail
• 030080FDBBNIM3 pan-head phillips screw with plastite threads - 8mm long - Used in the scanner optical carriage assembly
• 030080FWWSNIM3 pan-head phillips screw with machine threads and captive washer - 8mm long
• 040100FNBBNIM4 pan-head phillips screw with machine threads - 10mm long
• 0515-2908Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
• 0515-4257Pan head taptite screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
• 0515-4318Stabilizing screw for the 2,000-sheet feeder - Mounts on right side of the 2,000-sheet paper feeder assembly (two used)
• 0515-4424Pan head plastite tapping screw - M2.9 x 1.27, 11.35mm long, Phillips recess - Steel, zinc-clear chromate conversion finish
• 0515-4671Pan head plastite screw with washer - M3.0 x 1.27, 9.1mm long, Number 2 Phillips recess - Steel, nickel plated finish
• 0515-4672Pan head plastite screw with washer - M4.0 x 1.75, 13.1mm long, Number 2 Phillips recess - Steel, nickel plated finish
• 0515-4679M3 pan-head phillips screw with washer - 6mm long
• 0515-4700Screw (Plastic) - M3x12.30
• 0624-1055Pan head plastite screw - 2-28 thread, 0.312 inches long, T8 torx
• 3030-1103Screw socket head cap (black) 6,32mm 0.25 inch long
• FU5-9059-000CNM3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
• IR4041P021NIM3 pan-head phillips screw with plastite threads - 8mm long
• NS-SCR00027NIM3 pan-head phillips screw with plastite threads - 10mm long
• NS-SCR00056NIM4 pan-head phillips screw with plastite threads - 10mm long
• NS-SCR00206NIM3 pan-head phillips screw with machine threads - 2.2mm long - Used in the scanner optical carriage assembly
• RC1-0266-020CNM3 stepped shaft screw
• RS1-9004-020CNSteeped screw for HP LaserJet 4345 Series
• RS5-9099-000CNStepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
• RS5-9175-000CNSlotted thumbscrew (with large flat head) - Used to mount the paper feeder assembly to the printer or another feeder assembly (Four used per feeder assembly)
• WS9-0255-000CNHex head bolt - Thumbscrew on left rear corner - Two used
• XA9-0265-000CNScrew with captured washer - To hole plastic to metal - M4X6
• XA9-0267-000CNM3 screw - 6mm long
• XA9-0499-000CNScrew with captured washer - Used to fasten plastic to metal - M4 X 6mm screw
• XA9-0596-000CNM3 X 6 screw for HP LaserJet 9040 9050 Series
• XA9-0668-000CNMachine screw with captured washer - M3 X 29.5mm long
• XA9-0828-000CNM3 pan head phillips screw with captive star washer - 4mm long
• XA9-0849-000CN4 M3 truss-head phillips screw with machine threads included - 6mm long
• XA9-0890-000CNM3 truss-head phillips screw with machine threads - 6mm long
• XA9-0912-000CNMachine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
• XA9-0957-000CNM3 X 4 truss head screw
• XA9-0994-000CNScrew - M4 x 6mm long
• XA9-1159-000CNM3 X 10mm machine screw with attached washer - Used to hold plastic to metal
• XA9-1162-000CNM3 X 10 machine screw with captured washer - To hold plastic to metal
• XA9-1169-000CNOrder Xb4-5300-805cn
• XA9-1189-000CNMachine screw with attached washer - M3, 10mm - Used to hold plastic to metal
• XA9-1200-000CNM3 X 8 Screw for HP LaserJet 9040 9050 Series
• XA9-1205-000CNM3 X 4 truss head screw
• XA9-1262-000CNM4 pan-head phillips screw with self-tapping threads - 10mm long
• XA9-1263-000CNM3X5 Phillips washer-head machine screw with a broad, flat washer attached to the screw head - Used to fasten sheet metal parts together
• XA9-1273-000CNM4 X 12mm Indented pan head screw
• XA9-1275-000CN4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
• XA9-1276-000CNWafer head machine screw, clear zinc, 3M X 8mm - Secures plastic to metal
• XA9-1280-000CNScrew M3x18 w/washer Screw M3x18 w/washer
• XA9-1291-000CNM3 pan-head Phillips screw with flat washer - 8mm long
• XA9-1300-000CNScrew - M4 X 8mm long
• XA9-1328-000CNM3 pan-head Phillips screw - 10mm long
• XA9-1329-000CN4 M3 X 10 truss head screw included - Holds sheet metal to sheet metal
• XA9-1330-000CNM3 X 8 truss head screw
• XA9-1355-000CNM3 pan-head Phillips screw with machine threads - 8mm long
• XA9-1386-000CNM3 X 8mm long self threading screw with captured washer
• XA9-1418-000CNM3x6 TP screw for HP LaserJet 500 MFP
• XA9-1420-000CNM3 pan head phillips screw with captive flat and split-lock washers - 8mm long
• XA9-1421-000CNM4x14 screw for HP LaserJet 3380 Series
• XA9-1422-000CNM4 X 12mm machine screw with washer
• XA9-1447-000CNM12 pan-head Phillips screw with annular nails - 8mm long
• XA9-1448-000CNScrew - M4 X 8mm long
• XA9-1449-000CNM3 pan-head Phillips screw with machine threads - 8mm long
• XA9-1451-000CNM3 X 10 machine screw with captured washer - To hold plastic to metal
• XA9-1464-000CNScrew - Flat head phillips drive machine screw - M3 X 6mm
• XA9-1466-000CNMachine screw with captured washer - M3 X 29.5mm long
• XA9-1469-000CNMachine screw with attached washer - M3, 10mm - Used to hold plastic to metal
• XA9-1490-000CNScrew Tp M4x8
• XA9-1498-000CNM3 X 8 truss head screw
• XA9-1500-000CNM3 pan-head Phillips screw with flat washer - 8mm long
• XA9-1501-000CNM3 pan-head Phillips screw - 10mm long
• XA9-1503-000CNM3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
• XA9-1504-000CNM3 truss head (flanged) screw - 8mm long
• XA9-1561-000CNScrew - RS M3 x 6mm - Used to secure metal to metal
• XA9-1566-000CNM3X6 pan-head Phillips screw with annular nails - 8mm long
• XA9-1583-000CNM4 truss head (flanged) phillips/hex combo drive screw - 12mm long
• XA9-1648-000CNScrew - TP M3 x 8mm - Used to secure anything to plastic
• XA9-1670-000CNScrew - M3 X 6mm
• XA9-1801-000CNM13x12 RS screw - Used to secure metal to metal
• XB1-2300-407CNM3x4 machined truss-head screw
• XB1-2400-805CNM4x8 machined truss-head screw
• XB2-4300-605CNM3 pan-head phillips screw with flat washer - 6mm long
• XB2-6300-607CNScrew - M3 X 6mm long
• XB2-7300-605CNMachine screw with attached washer - M3, 6mm - Used to hold plastic to metal
• XB2-7300-607CNM3X6mm screw with captured washer
• XB2-7400-606CNScrew toothed washer - M4 x 6mm - Used to secure metal components to metal components
• XB2-8300-607CNM3x6 screw with washer
• XB2-8300-609CNM3 screw with captive flat washer - 6mm long
• XB2-8300-805CNM3 x 8 Pan-head screw with washer
• XB2-8300-807CNM3 x 8 Pan-head screw with washer
• XB4-5300-805CNMachine screw with attached washer - M3, 8mm - Used to hold plastic to metal
• XB4-5300-809CNM3 pan-head phillips screw with plastite threads - 8mm long
• XB4-5401-005CNScrew, p, m4x10
• XB4-5401-009CNMachine screw with attached washer - M3, 10mm - Used to hold plastic to metal
• XB4-5401-209CNScrew - M4 X 8mm long
• XB4-7300-605CNScrew - 6 mm Phillips head screw with attached washer
• XB4-7300-609CNScrew - Self tapping BH3X6mm
• XB4-7300-805CNPlastic self thread-forming screw - Used to secure parts to plastic holes
• XB4-7300-809CNM3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long
• XB4-7400-805CNScrew- tapping- truss m4 screw- tapping- truss m4x8
• XB4-7401-005CNM4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
• XB4-7401-006CNM4x10 tapping pan-head screw
• XB6-7300-406CNXb6-7300-406cn
• XB6-7300-605CNTP Screw - Pan/washer head machine screw - M3X6
• XB6-7300-805CNTP Screw - Pan/washer head machine screw - M3X8
• XB6-7301-405CNScrew M3x14 Screw M3x14
• XB6-7303-005CNMachine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic