Information for: RG5-1928-000CN

• PartDescription
• 4G1-2283-000CNCable, saddle unit
• 4G1-2285-000CNSensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
• 4G3-1777-000CNStaple connecting cable assembly
• 4H1-1080-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 4H1-6581-000CNLow voltage power supply cable - Connects between the power supply and the DC controller PC board
• 4H1-6582-000CNJet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
• 5063-1254IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
• 5063-1255IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.
• 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• 5851-2501Hard drive power SATA cable - Provides power to the hard drive connects to the mother board
• 5851-2502Hard drive SATA cable - Connects the hard drive with the mother board - Transfer all the data from the printer to the hard drive
• 5851-2503Cable fax for HP LaserJet M3035 MFP
• 8120-8485Universal Serial Bus (USB) interface cable (Flint Gray) - Type A connector to type B connector - 1.8m (6.0ft) long
• 8120-8749IEEE 1394 (FireWire) cable with two ferrites - 6-pin to 6-pin - 1.9m (6.3ft) long
• 8120-8907Telephone cable (Australian) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Australian phone plug on other end
• 8120-8908Telephone cable (Korea) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Korea phone plug on other end
• 8120-8911Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark)
• 8120-8912Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end
• 8120-8913Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel)
• 8120-8914Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy)
• 8120-8915Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands)
• 8120-8916Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end
• 8120-8917Telephone cable (South Africa) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, South Africa phone plug on other end
• 8120-8918Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden)
• 8120-8920Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey)
• 8120-8921Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong)
• 8120-8922Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary)
• 8120-8923Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa)
• 8121-0811Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
• 8121-0844Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland)
• 8121-0868Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
• 8121-1042Telephone cable - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end (Hong Kong)
• 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
• 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
• C2946A8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
• C2947AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
• C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
• C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
• C2965-60004Disk drive ribbon cable
• C2990AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
• C2991AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
• C3763-60502Cable Assy c-link cable unit.
• C3764-60546Flipper cable assembly
• C3764-60547Cable assembly with ferrite - 5-pin (F) connector to 4-pin (M) connector - 75.4cm (29.7in) long
• C4781-60504Multi-Bin mailbox interface C-link cable - 45cm (17.7-in) long
• C4785-60530Multi-Bin mailbox interface cable - 1.8m (5.8ft) long
• C4787-60507Stapler unit C-link cable - Has two high density 15-pin (M) connectors - 91.4cm (36in) long
• C4788-60524Flipper Ribbon Cable - Control Cable for Flipper Assembly
• C6518AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
• C8085-60515Flipper and paper path ribbon cable
• C8085-60517Jet-link cable and power cord assembly
• C8549-60105Copy connect cable - Interconnects the copy processor board in one of the optional EIO slots to the LVDS adapter board in the flatbed scanner assembly - 76.20cm (30in) long
• FG3-2892-000CNCable, solenoid
• FG3-2903-000CNCable, operation tray
• PA03002-C125FJFront panel cable - Between front panel and junction PCA
• PA03002-C203FJDC cable - From power supply to copier logic board
• PA03002-C204FJCarrier flex cable - From carrier unit to junction PCA
• PA03002-C228FJSensor cable - Connects ADF sensors to copier control board
• PA03002-C229FJCCD cable - From control PCA to CCD PCA on optical unit
• Q3500-80001Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)
• Q3938-67912Flat cable, 28, 940, A
• Q3938-67913Flat cable, 28, 970, B
• Q3938-67942PCIe Cable - Connects to the SCUID board on havic assembly
• Q3938-67948ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly
• Q3938-67992ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assemblyADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly Replaced: Q3938-67948
• RC1-9306-000CNCable guide ´A´
• RF1-4052-000CNPaper Pickup Cable
• RG5-1843-000CNPaper sensor cable - J11 to J15
• RG5-1849-000CNCable assembly - Fuser cable 1 - J50/51 to J10/56/222
• RG5-1850-000CNDuplexer cable assembly - From duplexer to DC controller
• RG5-1859-000CNSensor cable - PIU PS2 sensor cable - J13 to J1205
• RG5-1861-000CNCable assembly - 20-pin (F) connector on each end - 39.4cm (15.5in) long
• RG5-1919-000CNCable assembly - From DC controller board to main motor
• RG5-1920-000CNCassette size sensor cable - Between cassette size sensor PCA's and formatter board
• RG5-1921-000CNFan cable - Fan 3 power cable
• RG5-1923-000CNCable assembly for HP LaserJet 5Si Series
• RG5-1924-000CNDual cable assembly with ferrites - 10-pin (F) connector, 9-pin (F) connector, and two 6-pin (F) connectors - 1.1m (3.7ft) long
• RG5-1925-000CNCable assembly - 5-pin (F) connector to both a 27cm (10.6in) cable with a 3-pin (M) connector and a 27.2cm (10.7in) cable with a 2-pin (M) connector
• RG5-1926-000CNBD cable - J18 to J2007
• RG5-1927-000CNILS cable - From J1401 to J221/J205
• RG5-3909-000CNPower supply cable - Between power supply and controller PCA
• RG5-3917-000CNCable
• RG5-3919-000CNMain cable - Largest cable in C4781A
• RG5-4377-000CNCable assembly - An 11-pin (F) connector, a 10-pin (F) connector, and two 7-pin (F) connectors - 1.1m (3.7ft) long
• RG5-4378-000CNCable assembly with ferrites - Has many connectors: a 14-pin (F), an 11-pin (F), two 7-pin (F), a 5-pin (F), two 4-pin (F), and two 3-pin (F) - 85.6cm (33.7in) long
• RG5-4381-000CNCable assembly - 18-pin (F) connector to 25.4cm (10in) grounding wire with ring terminal, 35.7cm (14in) cable with 4-pin (F) connector, 53.3cm (21in) cable with 1-pin (F) connector, and 86.4cm (34in) cable with 4-pin (F) connector
• RG5-4386-000CNCable assembly - From DC controller board to main motor
• RG5-4439-000CNFeeder Cable for HP 09998390001
• RG5-4440-000CNMain cable on input assembly
• RG5-4726-000CNCable assembly for HP LaserJet 8000 Series
• RG5-5568-000CNCable and guide assembly
• RG5-5598-000CNPaper-feed cable - Includes the interface cable from the engine controller PC board to the accessory paper tray connector and the engine controller PC board ground cable.
• RG5-5752-000CNControl panel cable assembly - Connects between the control panel and the intermediate PC board
• RG5-5919-000CNRear lower cable - Main lower cable from the DC controller board
• RG5-5920-000CNRear upper cable - Cable from DC Controller to many driver PC Boards
• RG5-5925-000CNFuser connecting cable assembly - Cable with large black main connector for Fuser Assembly
• RG5-5925-020CNFuser connecting cable assembly - Cable with large black main connector for fusing assembly
• RG5-5930-000CNPrint Cartridge Drive cable - From Toner Driver PCA to Toner Cartridge motors and motor rotation sensors
• RG5-5930-020CNPrint cartridge drive cable - From Toner Driver PCA to toner cartridge motors and motor rotation sensors
• RG5-5932-000CNFusing sensor cable assembly - Connects to Fuser sensor PC Board
• RG5-5932-020CNFusing sensor cable assembly - Connects to Fuser sensor PC Board
• RG5-5937-000CNHigh voltage cable - Connects between the main power supply (J1) and the high voltage power supply (J201)
• RG5-5938-000CNProcess cartridge cable - Connects between the print driver board (J608) and the high voltage board (J202)
• RG5-5939-000CNToner cartridge cable - Cable between Print Driver PCA and Toner Driver PCA
• RG5-5940-000CNHigh voltage cable - Connects between the DC controller board (J101) and the high voltage power supply assembly (J203)
• RG5-5943-000CNCrossmember cable - This cable connects J1701R, J3015D, J3013, and J3085 at rear of printer
• RG5-5952-000CNFusing motor cable - Cable between DC Controller PC Board and Fuser motor M10
• RG5-5960-000CNITB sensor cable assembly - On left side of ITB assembly drawer
• RG5-5960-020CNITB sensor cable assembly - On left side of ITB assembly drawer
• RG5-5962-000CNRight rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board
• RG5-5962-020CNRight rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board
• RG5-5963-000CNRight rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board
• RG5-5963-020CNRight rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board
• RG5-5966-000CNPost controller cable - Connects between the high voltage power supply (J210) and the post charging unit (J501)
• RG5-5974-000CNRight upper crossmember cable assembly - Mounts on the upper rear of the print mechanism frame assembly
• RG5-5975-000CNRear lower cable - From DC Controller board to Secondary Transfer/Registration clutches and sensors - J121 to J3022, J3025, J3026 and J3027
• RG5-5991-000CNPower supply cable - Connects between the scanner power supply board and the print engine power supply module
• RG5-5992-000CNGrounding cable - Grounding cable for ADF/scanner assembly
• RG5-6148-000CNLaser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA
• RG5-6148-020CNLaser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA
• RG5-6159-000CNRear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover
• RG5-6159-030CNRear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover
• RG5-6200-030CNVideo board cable - Cable between main power supply and video controller PC Board
• RG5-6200-03ACNVideo board cable - Cable between main power supply and video controller PC Board
• RG5-6200-050CNDC Controller Kit - Includes the cable that connects the low voltage power supply to the formatter and the flat cable that connects DC controller PCB to the formatter
• RG5-6240-000CNJetlink connector socket and cable
• RG5-6240-020CNJetlink connector socket and cable
• RG5-6249-000CNJetlink connector grounding cable
• RG5-6257-000CNScanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly
• RH2-5456-000CNRibbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
• RH2-5507-000CNFlat cable - Ribbon cable between DC Controller PCA and Print Driver PCA
• RH2-5508-000CNRibbon cable - Conntects between the toner controller board (J802) and the memory controller board (J1001)
• RH2-5569-000CNInterface cable assembly - Includes the coiled cable and connector - Mounts on the lower left rear of the high capacity input tray
• RH2-5569-020CNInterface cable assembly - Includes the coiled cable and connector - Mounts on the lower left rear of the high capacity input tray
• RH2-9008-000CNPower cable assembly - Includes the coiled cable with 90 degree power supply connector at one end and straight (M) connector at the other - Mounts on the lower left rear of the high capacity input tray
• RK2-1354-000CNLaser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
• RK2-1355-000CNLaser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector
• RK2-1356-000CNFlexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
• RM1-1401-000CNCABLE, DUPLEXING INTERFACEDuplexer interface cable
• RM1-1401-020CNDuplexer interface cable
• RM1-3217-000CNFixing motor cable
• RM1-3383-000CNToner feed motor (M17) cable
• RM1-3385-000CNToner feed motor (M16) cable
• RM1-3389-000CNControl Panel cable
• RM1-3390-000CNFace-down unit 1 cable
• RM1-3391-000CNFace-down unit 2 cable
• RM1-3560-000CNDrawer cable - Locaten on the fin lock assembly in the intermediate feed main body
• RM1-3561-000CNIntermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly
• RM1-3563-000CNMotor cable - For media feed stepping DC motor (M202)
• RM1-3564-000CNMotor cable - For media feed stepping DC motor (M201)
• RM1-3571-000CNPaper pick-up option drawer cable
• RM1-3572-000CNPick-up option door switch cable
• RM1-3573-000CNPick-up option PCA connect cable
• RM1-3574-000CNOption sensor PCA connect cable
• RM1-3575-000CNPaper pick-up option cable - Used for the 1 x 500-sheet input tray
• RM1-3576-000CNPick-up option lifter unit cable
• RM1-3599-000CNMFP AC cable - Has connector J3005 on one side and J301 on the other
• RM1-3610-000CNDC controller board power cable
• RM1-3612-000CNFixing joint cable
• RM1-3617-000CNFront cable - Connetcs the environment sensor, the delivery unit cooling fan, the cartridge front area cooling fan, and the VOC fan to the DC controler PC board
• RM1-3618-000CNRear lower cable
• RM1-3619-000CNRear upper cable
• RM1-3620-000CNScanner joint cable
• RM1-3622-000CNPanel joint cable
• RM1-3623-000CNInterface joint cable
• RM1-3624-000CNColor plane registration joint cable
• RM1-3630-000CNMulti-purpose/tray 1 cable
• RM1-3640-000CNWaste toner sensor cable
• RM1-4053-000CNLaser scanner motor cable - Connects ECU to scanner motor (M3).
• RM1-4060-000CNCable assembly - For tray 2 paper pickup sensor
• RM1-4062-000CNOption input tray cable
• RM1-4409-000CNFuser bias cable assembly
• RM1-5029-000CNCable, fixing open sensor
• RM1-5030-000CNCable, tp/t2 open sensor